Used Dmg Mori Ntx 2000 for sale (3)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: NTX 2000/1500 2nd Gen Year of manufacture: 2020 Control: Celos Fanuc F31iB5, Mapps 4 Technical Data: Maximum turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: X1 axis: 675 mm Y axis: ±150 mm Z1 axis: 1,562 + 164 mm B axis: ±120° A axis: 1,542 mm X2 axis: 200 mm Y2 axis: ±40 mm Z2 axis: 1,542 mm Main spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Counter spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Milling spindle: Speed range: 0–12,000 rpm Drive power: 28/23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: No. of tool holders: 12 Speed of driven tools: 12,000 rpm Square tool shank length: 20 mm Boring bar shank diameter: Ø 32 mm Drive power: 5.5/5.5/3.7 kW Torque: 16.9/13.1/8 Nm Rapid traverse: X axis: 50 m/min Y axis: 40 m/min Z axis: 50 m/min A axis: 36 m/min X2 axis: 25 m/min Y2 axis: 18 m/min Z2 axis: 40 m/min B axis: 100 rpm Through-bore clamping device: Ø 67 mm Operating hours: approx. 15,050 h Spindle hours: approx. 4,210 h Technical features and accessories: - Kitagawa 8-inch through-bore chuck BB208A621 Ø 210 mm on main and counter spindle - Dual foot switch for spindle 1 and spindle 2 - Chuck cylinder stroke monitoring (linear position monitoring) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant: water-soluble coolant - Chip conveyor - Hydrajet MS30-1000/70 bar coolant system - Coolant chiller - Air blast device for chuck (spindle 2) - Interface for mist extractor Redpfxjyfl N Tj Agrjbt - Manual tool presetting device installed on the machine (removable, spindle 1 and spindle 2) - Fully closed control loops for X, Y, and Z axes (tool spindle) - In-machine workpiece measuring system, Renishaw RMP600 - 4-color signal tower - Multi-dry filter - Voltage: 380 V, Frequency: 50 Hz - Alternating spindle speed - Prepared for 3D quickSET - Open pocket and island milling - High-speed fixed cycle - X-axis direction, JIS/ISO-compliant - 3D machine model - Transformer Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Technische Merkmale & Zubehör: - Kitagawa- Hohlspannfutter an Haupt- und Gegenspindel Rsdpfx Agoyfh R Hjrsbt - Fußschalter (doppelt) für Spindel 1 und Spindel 2 - Vollindexierung der Werkzeugspindel - Revolver- Reitstockfunktion - Geeignete Kühlmittelart: Wasserlösliches Kühlmittel - Späneförderer - Kühlmittelsystem 70 bar, Fabr. Hydrajet - Blasluft an der Spindel 1 und Spindel 2 - Automatischer Messarm an der Hauptspindel - Werkstückauswurf an der Spindel - Teileentlader - Vorbereitung für Stangenlader - Schnittstelle für Nebelabscheider - 2 Stk. RotorClear - Signalleuchte 4 Farben - Multi-Dry-Filter - Automatisches Antasten und Werkzeugkorrektur - Speichererweiterung - Zyklus für Ebenentransformation - Kühlmittelspritzpistole Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Swing over crosslide: 660 mm Turning length: 1540 mm Spindle bore: 91 mm Spindle speed main/sub: 4000/5000 rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000 rpm Spindle motors: 26/22 kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825 mm Width: 2850 mm Height: 2750 mm Weight: 15860 kg Rbsdsx A E U Nspfx Agrot Full B-axis Coolant through milling spindle: 70 Bar Knoll 110/700 Part picker & outfeed belt Automatic presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control 5 extra M-codes