Used Dmg Mori Clx 450 for sale (6)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,030 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,000 W, total height: 2,100 mm, total width: 1,900 mm, overall weight: 5,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, product length (max.): 4,400 mm, number of axes: 4, This 4-axis DMG MORI CLX 450 V4 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details. • Working range: • Max. turning diameter: 400 mm • Max. turning length: 800 mm • Swing over cross slide: 320 mm • C-axis: full interpolation • Main spindle: • Spindle nose: A8 • Spindle motor power: approx. 22/18 kW • Turret and tools: • Turret: 12 stations • All stations with driven tools • Performance: • Rapid traverse (X/Y/Z): approx. 24 / 10 / 30 m/min • Equipment: Tailstock • Power supply: 400 V / 50 Hz • Condition: Checked by DMG service before disconnection; very good condition with all functions working properly. Service report available for review. Additional equipment • Turning tools installed on the machine and included in the offer. Technical Specification Counter Spindle No Cedezbcp Nopfx Appogu Driven Tools Yes

Condition: used, Year of construction: 2023, operating hours: 7,103 h, machine/vehicle number: 0031001593C/3984914, Internal No.: 2.4, Speed: 4,000-5,000 rpm, Weight: 6,400 kg, Maximum turning diameter: 200 mm, Maximum turning length: 1,000 mm, Spindle bore: 65 mm, CNC control: DMG MORI SLIMline Sinumerik 840 D Solutionsline, 16-position tool turret with driven tools: 5x radial, 6 (8) radially or axially driven tools, Y-axis +/- 600 mm, Counter spindle, 1 chip conveyor DMG MORI MTR032-23, with 1 automated bar feeder BREUNING, Type: Irco ILS-MUK-10012-III, Year of manufacture: 04.2023, Machine No.: 74 112 287, Weight: 850 kg, Subject to prior sale. Cgjdpfxoy T Nw Se Appju

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe DMG CLX 450 V3, year 2018, Siemens Slimline control C-axis with driven tools Sauter turret with 12 positions VDI40 Chuck 250 mm Spindle bore 80 mm X-axis travel: 267 mm Z-axis travel: 600 mm - Measuring probe - Parts catcher - Tailstock Cgjdpfx Aox Hqh Seppou - Chip conveyor - Documentation - 3 driven tool holders included with the machine Cutting hours: 4,600 hours Very good condition

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you: Manufacturer: DMG MORI Type: CLX 450 TC Year of manufacture: 2022 Control: Celos with Siemens 840D sl Operate Technical data: Max. turning diameter: 400 mm Turning length: 1,100 mm Bar capacity: max. 65 mm Travel axes: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14 / 17 kW Max. torque: 275 / 345 Nm Sub spindle: Speed: 5,000 rpm Drive power: 14 / 17 kW Cjdpoy Hfpwsfx Appogu Max. torque: 275 / 345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8 / 10.5 kW Tool holder: HSK-A 63 Tool changer: 60 positions Max. torque: 73 / 90 Nm Hollow clamping device: Ø 67 mm Technical features & accessories: - Absolute, direct path measuring systems in X and Y axes - Double switch filter - DMG Mori IoT connector - Dynamic dual-pressure clamping for main and sub spindle - Three-jaw power chuck, SMW Autoblok for main and sub spindle - Tailstock function for sub spindle incl. foot switch - Hinged belt chip conveyor incl. coolant tank - Coolant system 8 / 20 bar, consisting of: - Coolant tank 600 l - Band filter system - Lift pump - Mechanical oil mist separator - Chuck flush device on main and sub spindle - Coolant supply through sub spindle - Coolant spray gun - Safety glass disc cleaning system - Workpiece probe RMP40, Renishaw - Tool measurement probe Z-Nano, Blum - MPC (Machine Protection Control) - Path measuring system for Z1-axis - Automatic working area door, electric - Electrical interface for Robo2Go, includes: - Additional compressed air connection - Additional Ethernet interface - Power supply for robot via machine - Bar machining package Ø67 mm, comprising: - Max. bar diameter Ø67 mm - Workpiece pick-up system with conveyor belt, left-side discharge for parts up to Ø80 mm x 200 mm, max. workpiece weight 6 kg - Pneumatic ejector for sub spindle - Connection for bar feeder or bar magazine - Tropical package - Signal provision for operating data acquisition device - Electronic handwheel - Inputs and outputs controllable via M function - Expansion of tool data and tool corrections to 3,000 - Off-center turning and milling operations - Complete machining of shaft parts - Technology cycle for alternating spindle speed - Multi-thread cycle 2.0 - Technology cycle with dialog-guided programming - Technology cycle for parting-off Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Changes and errors in the technical data and information, as well as prior sale, reserved!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,426 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 600 mm, spindle motor power: 25,500 W, overall weight: 5,500 kg, controller manufacturer: SIEMENS, controller model: SLIMline multi-touch, number of axes: 3, This 3-axis DMG MORI CLX 450 V3 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a Z-axis travel of 600 mm. The machine is equipped with a powerful spindle capable of 4000 rpm and includes 12 driven tool stations for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details. • Version: V3 (no Y-axis); configured for turning + milling (C-axis) • Working area: • Swing over bed: 650 mm • Swing over cross slide: 465 mm • Max. turning diameter: 400 / 315 mm • Rapid traverse X/Z: 30 / 30 m/min • Axes: X, Z, C; C-axis positioning accuracy: 20 arcsec • Main spindle: • Spindle nose: A2-8 • Bar capacity: 80 mm • Front bearing diameter: 130 mm • Chuck diameter options: 210 / 250 / 315 mm Cgsdpfxsyzq T Re Appju • Spindle power (40% / 100%): 25.5 / 17 kW • Max. torque (40% / 100%): 426 / 283 Nm • Turret (VDI 40): • 12 stations (12 driven) • Tool station diameter: 40 mm • Driven tool power: 5.44 kW • Driven tool torque: 20 Nm • Driven tool max speed: 4000 rpm • Tailstock: • Travel: 500 mm • Center interface: MK5 • Max. force: 8 kN • Guideways / Ballscrews: X/Z 40 × 10 mm • Accuracy: Positioning accuracy X/Z: 5 / 10 µm • Capacity / Workholding: • Max. bar capacity: 80 mm • Hydraulic chuck: Ø 254 mm (installed) • Chuck bore: 82 mm • Coolant & chip handling: Coolant gun 5 bar; Chip tank • Control: Siemens SLIMline multi-touch (19") • Dimensions & weight: • Weight without chip conveyor: approx. 4950 – 5050 kg • Weight with chip conveyor: approx. 5500 kg • Notes: Full 12 driven tool stations Additional equipment • Chip conveyor (right-side discharge) • Hydraulic tailstock (M-function controlled) • Direct measuring system (X-axis) • External electronic handwheel • DMG MORI IoTconnector • Marposs tool probe • Signal tower (4-color) • Set of static tool holders VDI 40 • Set of driven tools WTO (QuickFlex, ER32) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 17,000 W, total height: 1,950 mm, total width: 3,260 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, product length (max.): 2,440 mm, number of axes: 3, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. • V3 Version (No counter spindle, no y axis) • no bar loader Cgsdpfx Asyu Sc Ejppju • features a main spindle motor power of 25.5 kW (at 40% DC) or 17 kW (at 100% DC) Technical Specification Counter Spindle No Driven Tools Yes