Used Gildemeister Nef 320 K for sale (264)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,876 h, Functionality: fully functional, turning length: 750 mm, turning diameter: 320 mm, spindle speed (max.): 3,550 rpm, controller manufacturer: Siemens, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 750 mm Fpslhcewd Rw Iocqpeg Diameter – standard tool over support: 150 mm Cross travel: 185 mm Spindle bore: 52 mm Control: Siemens Spindle and drive Speed: 14–3,550 rpm Gear ratios: 2 Quill stroke: 120 mm Rapid stroke: 6 m/min MACHINE DETAILS Space requirement: approx. 2,600 x 1,440 x 1,440 mm Machine weight: approx. 2,000 kg Spindle hours: 2,876 h (machine originates from a training workshop) Total power requirement: 10 kW

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Folhccsv Aix Asqpjpg Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm >> Weight of the machine approx.: 2.0 t Accessories and equipment: >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,876 h, Functionality: fully functional, turning length: 750 mm, turning diameter: 320 mm, spindle speed (max.): 3,550 rpm, controller manufacturer: Siemens, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 750 mm Diameter – standard tool over support: 150 mm Cross travel: 185 mm Spindle bore: 52 mm Control: Siemens Spindle and drive Speed: 14–3,550 rpm Gear ratios: 2 Quill stroke: 120 mm Rapid stroke: 6 m/min MACHINE DETAILS Space requirement: approx. 2,600 x 1,440 x 1,440 mm Machine weight: approx. 2,000 kg Spindle hours: 2,876 h (machine originates from a training workshop) Total power requirement: 10 kW Fjlhccov Untvsqpjpg

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Year of manufacture 2003 18,700 operating hours Hkeidenhain CNC 3110 Pilot control Max. turning diameter over bed 320 mm Max. tool diameter over support 150 mm Fjlhcewg Slxjcqpjpg Turning length 750 mm Spindle speed 10 - 4000 rpm Spindle head DIN 55027, size 6 Main spindle motor 9 kW Spindle bore 52 mm Feed rate 8 m/min, Z-axis 10 m/min Tailstock MT5, quill diameter 70 mm Quill stroke 70/120 mm Center height 160 mm Dimensions 2450 x 1670 x 1825 mm Weight approx. 2000 kg Total connected load 14 kVA Base dimensions 2540 x 1690 mm Accessories: Röhm lathe chuck ROTO-S plus, Ortlieb collet chuck, center punch New quick-change holder including 4 inserts, Multifix Z-axis spindle play.

Condition: used, Year of construction: 2001, Functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Face travel: 260mm Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge All prices plus VAT Foletrmrxshccqpopg Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: used, Year of construction: 2001, turning diameter max. 320 mm turning length max. 740 mm control Manual Plus 3110 Heidenhain greates pass round over bed 320 mm Swing dia. over traverse guideway 150 mm turning length 740 mm cross movement 185 mm centre distance 750 mm turning speed range - main spindle 10 - 4.000 min/-1 power capacity - main spindel 11 kW max. Torque 410 Nm spindle head No. 6 DIN 55027 spindle diameter in front bearing 85 mm spindle bore 50,8 mm max. chucking diameter 200 mm Fpolhov U Dhceccqpjg chucking diameter 200 mm type MultiFix - B dia. of quill 70 mm capture MK 5 quill stroke 120 mm rapid traverse x/z: 8 / 10 m/min Feed force ( X / Z ) x/z: 3 / 6 kN total power requirement 14 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 3,5 x 2,5 x 2,0 m Cycle controled Lathe GILDEMEISTER - NEF 320 - Operating-Hours (Power-On) : 21.529h

Condition: good (used), Year of construction: 2001, Manufacturer: Gildemeister Model: NEF 320 Year of manufacture: 2001 Control: Siemens 810 D - Manual Turn Chuck diameter : 200 mm Turning diameter : 150 mm _____ Description of the machine: Rotation diameter: 320 mm turning diameter: 150 mm Center distance: 750 mm Spindle speed: 4,000 rpm Fjlhcsupi D Ujcqpspg Torque: 410 Nm Tool holder: Parat holder Chuck: Quick-action chuck Tailstock: Manual Coolant pump: 2.3 bar

Condition: good (used), Year of construction: 1999, Gildemeister NEF 320 / cycle lathe, Year of manufacture 1999, Manual Plus control, center width 750 mm, circulation Ø over bed 320 mm, spindle speed up to 4,000 rpm, 2 gear stages, Multifix steel holder, Fjlhcou Aqfzecqpspg tailstock, accessories,

Condition: excellent (used), Swing over bed 212 mm Distance between centers 750 mm Spindle speeds 10-4'000 rpm Control: HEIDENHAIN Manual Plus Misc. accessories Feljud Nb Iehccqpspg MARCELS MASCHINEN CH

Condition: new, diameter ( 210 ) mm Folhccqsunu Amspopg total power requirement 0 kW weight of the machine ca. ? kg dimensions of the machine ca. m Flange + clamping tube Data see photo

Condition: good (used), Year of construction: 2009, Ref. -No.: 10523 Manufacturer: DMG GILDEMEISTER Type: NEF 600 Year of construction: 2009 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Halberstadt Country of origin: Germany - Japan Turning Speeds: 4.000 RPM Tool holder type: VDI 40 DIN 69880 X stroke: 398 mm Y stroke: 1250 mm C-Axis: ° Turning Length: 1.200 mm Swing Diameter Over Bed Slide: 490 mm Fpelhccjwiwinoqpeg Spindle Diameter In Front Bearing: 160 mm Spindle Bore: 118 mm Spindle nose: 220h5 Spindle Speed Min.: 3.500 RPM Max. Torque: 790 / 590 Nm Rapid Travel Speed X-Axis: 30 m / min Rapid Travel Speed Z-Axis: 30 m / min Main Drive: 20 - 4000 kW Total Power Requirement: 50 kW Max. Rod diameter: 92 mm Spindle 1 chuck diameter: 315 mm Max feed rate: mm / min Power Capacity: 37 / 28 kW Turret places: 12 Pcs Machine length: 6500 mm Machine width: 3500 mm Machine Height: 2300 mm Weight Of The Machine Ca.: 5,3 t Further information: Tailstock: Tailstock displacement: 1,150 mm Clamping force: 12.5 kN Tailstock holder: MK 5 Machine is still in production and can be inspected at any time.

Condition: good (used), Year of construction: 2007, operating hours: 14,029 h, Functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, For sale is a Gildemeister NEF 400 CNC lathe. The machine is in good condition, ready for immediate use, and fully functional. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (transverse travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Max. turning diameter: approx. 400 mm Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Tool holder: VDI 30 Tailstock travel: 680 mm Tailstock mount: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirement (L x W x H): approx. 2.5 x 1.7 x 1.8 m Felhowig R Ijccqpjpg Machine weight: approx. 2.8 t Chip conveyor included in the offer Accessories such as tool holders are not included in the offer Can be offered separately Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 2011, CNC Lathe NEF 400 2011 With driven tools Technical specifications: Turning diameter 350 mm Turning length 650 mm Swing diameter over bed 385 mm Swing diameter over cross slide 350 mm Distance spindle nose to tailstock 902.5 mm Coc Eg S Rrsv Umldegerb Main spindle: Speed range - main spindle 0 - 4,000 rpm Drive power - main spindle 15.3 / 11.5 kW Max. torque 430 Nm Spindle diameter in front Bearing 100 mm Spindle bore 87 mm Max. bar diameter 52 mm Usable bar diameter 52 (45) mm Max. chuck diameter 250 mm Chuck diameter 165 mm Spindle head 170 h5 C-axis 0.04 ° Tool turret: Number of tool positions: 12 positions Shaft diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 positions Speed range - driven tool stations max. 4,500 rpm Fslewhxkdehccqpepg Drive power of driven tool stations: 5.5 kW Travels: X-axis 255 mm Z-axis 800 mm Tailstock: Tailstock travel 680 mm Tailstock mount MT 4 Clamping pressure 6.8 kN

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310 Fpjlhccqov Ehawjpeg

Condition: excellent (used), Year of construction: 1997, Hello. I have for sale CNC cyclic lathe GILDEMEISTER NEF 500 prod. year 1997. The machine is very accurate, ideal for turning single pieces as well as short series, you can work on it in conventional mode as well as programming. Programming is very easy consisting of filling in very simple and clear cycles, it is especially recommended to lathe beginners in the subject of CNC. The machine is connected with the possibility of testing and training in the operation and programming of the machine To the machine adds DTR Documentation If you want to speed up the execution of individual parts, this machine is ideal for such tasks TECHNICAL AND VISUAL CONDITION: Very Good Country of manufacture: Germany Machine parameters: - Control: Heidenhain Manual Plus - Quick-change knife vise - 3-jaw chuck fi 250mm Forkard - max. revolutions 2800rpm Fpelhcsr Rn Nuecqpsg - three-stage gearbox - max. turning diameter X axis = 500mm - max. length of turning Z axis = 1000mm - cooling system - tailstock - central lubrication of the slide - chip tray - spindle opening Fi-71mm - DTR - machine weight: 3800 kg I issue VAT invoices 23% price includes loading The machine after a full overhaul. Working 100%. Connected and ready to work. WE ALSO HANDLE ALL PROCEDURES RELATED TO LEASING!!! Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Condition: good (used), Year of construction: 1984, Swing diameter over bed 560 mm Swing diameter over cross slide 250 mm Spindle bore 65.3 mm Power Max. 15 KW Speeds 11.2 - 2,240 rpm Felhcovn Rlzjcqpopg Centre width 1,000 mm Quill diameter 80 mm Quill mount MK 5 Incl. chip conveyor Incl. complete documentation

Year of construction: 2004, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Additional Equipment Sauter Revolver with driven tools This Gildemeister CTX 320 horizontal turning machine was manufactured in 2004. It is ideal for versatile machining tasks. Contact us for more information. Application Types Turning Fpslhcewgf A Rjcqpsg

Condition: good (used), Year of construction: 2001, Gildemeister NEF 520 CNC Lathe TECHNICAL DATA Working Area Swing over bed: 500 mm Swing over cross slide: 290 mm Chuck diameter: 250 mm Cross travel: 260 mm Center distance: 850 / 1350 mm Turning Spindle Spindle head DIN 55027 Size: 8 Spindle bore diameter: 70 mm Spindle mount: metric 80 Spindle diameter in front bearing: 120 mm Main drive AC Drive power: 12 kW Max. torque: 920 Speed range: 10 – 3000 rpm Gear ratios: 2 Switchable speeds: Continuously variable Feed drive X-feed force: 5000 N Z-feed force: 10000 N X-rapid traverse: 8 m/min Z-rapid traverse: 10 m/min Multifix tool carrier; Size: C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill mount: MK5 Fpelhccewftvisqpsg Dimensions L x W x H: 2900 x 1953 x 1825 mm Weight: 2700 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Gildemeister lathe SMW Autoblok Hi-Grip high-precision chuck Chuck jaws Multifix tool holder Complete operating documentation Exact scope of offer as shown in the photo gallery We assume no liability for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Gildemeister NEF 400 lathe Year of manufacture: 2007 Siemens 840 Swing diameter: 400 mm over bed Speed range: 4000 rpm Spindle bore: 65 mm 8 tool positions Travel paths: X/Z 220/700 mm Accessories: Schunk lathe chuck, tailstock, coolant system Fslhcowfhumscqpjpg A live viewing is available upon request.

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Fpjlhcceuda Tnjqpeg Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm Felhccjvxwlveqpopg control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: good (used), Year of construction: 2004, operating hours: 29,701 h, Functionality: fully functional, For sale is a cycle lathe of the brand Gildemeister and type NEF 520 The machine is fully operational and in good condition More pictures and video available on request Technical data Year of construction: 2004 Operating hours: 29,701 h Rotation diameter over bed: 500 mm Rotation diameter over cross slide: 290 mm Face travel: 260 mm Center distance: 1,000 mm Control: Manual Plus Heidenhain Speed range - main spindle 8: 3,000 min/-1 Drive power - main spindle: 12 kW Folherz Rz Reccqpopg Max. Torque: 920 Nm Gear stages: 2 Gear stage 1 8: 750 min/-1 Gear stage 2 32: 3,000 min/-1 Spindle head: 8 / DIN 55027 Spindle bore: 70 mm Spindle diameter in front bearing: 120 mm Spindle nose: ME 80 Chuck diameter: 250 mm Tool holder: Multi-Fix C Quill diameter: 80 mm Quill stroke: 180 mm Quill holder: MK 5 Rapid traverse X: 8 m/min Rapid traverse Z: 10 m/min VC X: max. 5,000 mm/min VC Z: max. 5,000 mm/min Total power requirement: 24 kVA Machine weight approx.: 2.7 t Space requirement: approx. 4.5 x 2.8 x 1.8 m On request, transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2009, Turning diameter 350 mm Turning length 650 mm Fpolhcsv Umldscqpog Swing over bed 385 mm Swing over cross slide 350 mm Distance spindle nose to tailstock 902.5 mm Main spindle: Speed range - main spindle 0 - 4,000 rpm Drive power - main spindle 15.3 / 11.5 kW Max. torque 430 Nm Spindle diameter in front bearing 100 mm Spindle bore 87 mm Max. bar diameter 52 mm Usable bar diameter 52 (45) mm Max. chuck diameter 250 mm Chuck diameter 165 mm Spindle head 170 h5 C-axis 0.04 ° Tool turret: Number of tool positions: 12 positions Shank diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6-position Speed range - driven tool stations max. 4,500 rpm Drive power of driven tool stations: 5.5 kW Travels: X-axis 255 mm Z-axis 800 mm Tailstock: Tailstock travel 680 mm Tailstock mount MT 4 Clamping pressure 6.8 kN

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: Felhoub Amlsccqpepg This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: reconditioned (used), Year of construction: 2023, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2003 Spindle bore: 70 mm Center distance: 1500 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting Folhccjuq Ebroqpepg MULTIFIX tool holder with 10 pcs. inserts 3 jaw chucks FORKARDT 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip conveyor Coolant device Operating instructions