Used Doosan Compressor for sale (262)

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 2, turning diameter over cross slide: 600 mm, turning length: 600 mm, turning diameter: 390 mm, spindle bore: 65 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 600 mm, spindle motor power: 18 W, total length: 3,200 mm, total width: 2,000 mm, type of input current: DC, overall weight: 4,200 kg, spindle nose: 65, Equipment: documentation/manual, 2022 model, in excellent condition, with low mileage. Kodpjz Hdbmefx Ag Aodu

Condition: like new (used), Year of construction: 2026, operating hours: 42 h, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, power: 640 kW (870.16 HP), output current: 1,152 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 640 kW (870.16 HP), nominal power (apparent): 1,500 kVA, continuous power (apparent): 800 kVA, total length: 5,500 mm, total width: 1,800 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, rotational speed (min.): 1,500 rpm, type of input current: three-phase, We have the following emergency power generators or grid replacement systems from our series production available for sale, with the following technical specifications: Condition: New, 2026 Engine: Doosan DP180LB Rated power: 700 kVA / 560 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V - Includes batteries - Includes diesel tank (1000 L) - Includes circuit breaker 4P ABB XT7S - Includes control system (island operation) - On request, a control system for grid-parallel operation, load distribution, and peak load management can be provided for an additional charge. Seamless integration into your energy infrastructure. Complete unit installed in a sound-insulated, weatherproof container. Ksdswqai Hepfx Ag Aodu Dimensions: 600x245x270 cm (L x W x H) Weight: 10,500 kg Warranty: 24 months or 2000 operating hours. The emergency power generator will be delivered in operational condition, including a documented load test of 60 minutes. Delivery, installation, and commissioning are available for an additional charge. Price: €73,000 net.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM Kdjdpfxozwhtko Ag Aju MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Kodpfxjz Sx Nke Ag Ajdu

Condition: good (used), Year of construction: 2013, 230mm Swing, 230mm Max Turned Diameter, 230mm maximum turning length, 12 + 12 Station Turrets, Kdodpfx Agez Sqcvj Aju 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y axis, coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: used, Year of construction: 2022, operating hours: 1,990 h, Doosan DN Solutions LEO 1600 Year 2022 Fanuc i Plus control system 6-inch (170mm) chuck Spindle bore 45mm Travels: X-175mm Z-330mm Max turning diameter 320mm Max turning length 303mm 12-tool turret MT4 tailstock Included with the machine: Ksdpez R S T Iofx Ag Aedu Chip conveyor with tank and pump Very good condition PDF specification file available

Condition: excellent (used), Year of construction: 2016, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity, machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, Kodpez Rz Aqofx Ag Aedu swarf conveyor, tool setter, tailstock

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Max. turning diameter: 170 mm Kjdpoy E Ixxefx Ag Ajdu Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Kdsdpfx Agozuddys Aju

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Kdsdpfx Agszzdh Es Aou Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC lathe with a tailstock, in good condition, manufactured in 2015. It operated for 2 years in medium-volume series production, and since then, it has been used to produce smaller series and custom parts. Kedpoy Uwgqsfx Ag Aodu The machine is equipped with a chip conveyor, tool measuring device, a chuck with collet mounting, and a 3-jaw hydraulic chuck. It has powered tool holders (3 pieces). It includes an LNS bar feeder, capable of handling bars up to 3 meters in length (included in the price). Other features include: workpiece ejector, workpiece catching and delivery system, tool load monitoring, and an oil separator, which extends the coolant's lifespan. It also has a highly rigid cast iron machine bed and a turret with 12 tool positions (24 positions). The dimensions refer only to the lathe itself. Weight: 2900 kg (the weight of the bar feeder is separate). Net price. If you have any questions or require further information, please send us a message.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Machine parameters: Travel in X, Y, and Z axes: 1270 x 670 x 625 mm Table clamping area: 1300 x 670 mm Description: Kdjdpfx Agoz Iw Dde Aou The machine is in good technical condition, and testing is possible by prior arrangement. It features a FANUC control system. The machine has a cast iron construction, linear guides, travel in the X/Y/Z axes of 1270/670/625 mm, table dimensions with clamping "T" slots of 1300 x 670 mm, table load capacity of 1000 kg, and a tool changer with 30 positions. Extensive accessories include: a 4th axis (rotary table), a hydraulic vice, a RENISHAW tool and workpiece probe, an oil skimmer, a three-color light signaling system, a chip conveyor, a Filtermist 6002 emulsion mist extractor, tool holders, etc.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ITALIAN — DOOSAN DVF-6500 Brand: DOOSAN Model: DVF-6500 Machine Type: 5-axis CNC machining center Year of construction: 2019 CNC control: Heidenhain TNC-640 X-axis travel: 750 mm Y-axis travel: 785 mm Z-axis travel: 600 mm B-axis travel: -120° / +120° C-axis travel: 360° continuous Rapid traverse rates X / Y / Z axes: 45,000 mm/min Working feed rates X / Y / Z axes: 20,000 mm/min B-axis rapid speed: 25 rpm C-axis rapid speed: 50 rpm Spindle mounting: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 18,000 rpm Maximum spindle power: 30 kW Maximum spindle torque: 155 Nm Tilting rotary table: Ø 650 × 600 mm Maximum workpiece size: Ø 840 × H 500 mm Maximum workpiece weight: 600 kg Kdsdpfxez Atwfj Ag Aju Tool magazine: 60 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 3,700 × 2,450 × H 3,100 mm Machine weight: 14,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): High-pressure pump with external unit Measuring systems: Heidenhain scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Mist extractor: Included Magnetic table: Included Zero point clamping system: Included Tooling: Set of shanks/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration ENGLISH — DOOSAN DVF-6500 Brand: DOOSAN Model: DVF-6500 Machine Type: 5-axis CNC machining center Year of manufacture: 2019 CNC control: Heidenhain TNC-640 X-axis travel: 750 mm Y-axis travel: 785 mm Z-axis travel: 600 mm B-axis travel: -120° / +120° C-axis travel: 360° continuous X / Y / Z rapid traverse: 45,000 mm/min X / Y / Z working feed: 20,000 mm/min B-axis rapid speed: 25 rpm C-axis rapid speed: 50 rpm Spindle taper: ISO-40 Tool holder / pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 18,000 rpm Maximum spindle power: 30 kW Maximum spindle torque: 155 Nm Tilting rotary table: Ø 650 × 600 mm Maximum workpiece size: Ø 840 × H 500 mm Maximum workpiece weight: 600 kg Tool changer: 60 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 3,700 × 2,450 × H 3,100 mm Machine weight: 14,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): High-pressure pump with external unit Measuring systems: Heidenhain scales on the X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Mist extractor: Included Magnetic table: Included Zero point system: Included Tooling: Set of shanks/pull studs and various tooling Documentation: Manuals, electrical diagrams and CE declaration

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Kodpfx Agsy Nmdnj Asdu Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Kodpfox Sq Uvox Ag Asdu Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) Kjdpfx Agsy St Sde Asdu C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Ksdswu Rgqspfx Ag Ajdu Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: excellent (used), Year of construction: 2010, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, Kodpfsz Rzzaox Ag Asdu C axis 0.001 degrees, 12 station turret , 22KW Motor, Main spindle 4,000 rpm, sub-spindle 4,500 rpm, 3 jaw chuck, parts catcher, toolsetter,

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Kodpfxsz Ihnae Ag Asdu Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 Ksdpfx Agsz N Dhtj Aodu • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling • Coolant level sensor Additional equipment • 4th axis • Hydraulic system (3A + 1B) Ksdjz Rw U Aspfx Ag Asdu • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Kjdpfx Agoy Dunwo Asdu Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. Kdodpfxezh U A Tj Ag Aeu -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in Kdjdpey Dr A Ejfx Ag Asu production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5381-2013, Year of construction: 2013, load capacity: 1,600 kg, fuel type: electric, battery model: DIN 43535, 3PzS or 4EPzS types, remaining battery capacity: 90 %, battery voltage: 24 V, fork carriage width: 800 mm, fork length: 1,195 mm, turning radius (outer): 1,780 mm, overall weight: 1,540 kg, total height: 4,790 mm, total width: 880 mm, Equipment: pallet forks, Doosan LEDS16IP — 1.6t electric platform stacker General Drive: Electric, walk-behind Capacity (Q): 1.6 t (1,600 kg) Load centre distance (C): 600 mm Load distance (X): 836 mm Year 2013 Serial Number 5381-2013 Max. mast height 4,790 mm Unladen weight incl. battery: 1,540 kg Initial lift (h5): 120 mm Overall width (b1): 880 mm Kjdpjz Tdirefx Ag Aodu Fork dimensions (thickness/length): 185 / 1,195 mm Outer fork spread (b5): 575 mm Aisle width for 800×1200 pallet, lengthways (Ast): 2,520 mm Turning radius (Wa): 1,780 mm Performance Travel speed, laden/unladen: 9.0 / 10 km/h Travel speed, pedestrian/stacking mode: 5 / 3.5 km/h Lift speed, laden/unladen: 0.13 / 0.20 m/s Lowering speed, laden/unladen: 0.49 / 0.23 m/s Gradeability, laden/unladen: 6 / 8 % Electrics Drive motor (AC): 2.3 kW Lift motor (DC): 3 kW Battery: 24V, up to 500 Ah (DIN 43535, 3PzS or 4EPzS types) Max. battery weight: 400 kg Controller: AC pulse control (drive and lift)