Used Doosan CNC lathe for sale (283)

Condition: excellent (used), Year of construction: 2024, turning length: 755 mm, spindle bore: 102 mm, travel distance X-axis: 260 mm, rotational speed (max.): 2,800 rpm, total height: 2,100 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 5,650 kg, CNC Lathe with c-axis DOOSAN - PUMA GT3100M MACH-ID 9615 Make: DOOSAN Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Max. turning Ø: 790mm X-Axis: 260mm Z-Axis: 755mm Spindle bore: 102mm Speedrange: 2800Rpm Spindle power: 35kW ATC / revolver: 24 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Hjdpfx Amjy N Sb Eogsn Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm Hsdpfx Amox Eivpogsn SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Hedpotvl U Hefx Amgon

Condition: good (used), Year of construction: 2013, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 51mm bar capacity, Hedpey Tiphsfx Amgen spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: excellent (used), Year of construction: 2020, 300mm max. machining diameter, 600mm swing over bed, 510mm max turned length, Hsdpfxoy S Trke Amgon 4,500rpm spindle, 6,000rpm milling, 65mm bar capacity, 12 station turret, 15kW spindle motor, Siemens 828 control, 3 jaw power chuck, C axis & Milling, Tool presetter, Tailstock, Parts catcher, Swarf Conveyor,

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM Hjdpfx Ajzak Dxemgsn SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 520 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 579 mm, spindle motor power: 18,500 W, total height: 1,700 mm, total length: 3,000 mm, total width: 1,600 mm, overall weight: 4,500 kg, chuck outer diameter: 250 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller model: FANUC 18i-TB, Equipment: documentation/manual, CNC turning center with FANUC 18i-TB control. Main spindle with 10" chuck, equiped with subspindle and Live tool (C-axis) Hedpoyywufjfx Amgjn max turning diameter ~13.8" (350 mm), max turning length ~20.5" (520 mm), bar capacity ~3.0" (76 mm), and spindle bore ~4.0" (102 mm).

Condition: excellent (used), turning diameter over cross slide: 300 mm, turning length: 510 mm, Model: 2100 LYB Hedpey N Uqiefx Amgon Control: Fanuc i Series Year: 2019 Turning Diameter: 300mm Turning Length: 510mm ‘X’ Axis Travel: 205mm ‘Y’ Axis Travel: 105mm ‘Z’ Axis Travel: 560mm Spindle Speed: 4500 RPM Spindle Power: 15KW Spindle Torque: 169N-M Machine With: 200mm Power Chuck Driven Tools (1-AxiaL -1- Radial) Tool Eye Parts Catcher Filtermist Dimensions: 2880 x 1711 x 1921 High Weight: 3900 Kgs

Condition: used, Year of construction: 2009, CNC lathe, 2 axes, DOOSAN LYNX 220LB, year of manufacture 2009 Fanuc i series control Chuck diameter: 210mm Spindle bore: 51mm Max. turning length: 525mm Max. turning diameter: 320mm 12-position tool turret Tool probe Tailstock Part catcher Included with the machine: Hodpfx Aszai Rwjmgsn - Documentation - Chip conveyor with pump - Toolholders located on the turret

Condition: good (used), Year of construction: 2006, turning length: 305 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 5,000 rpm, quill diameter: 65 mm, quill stroke: 80 mm, bar passage: 51 mm, FANUC i Series control system Hjdpfx Amsy S U Dhogjn Turret with 12 stations (non-driven) Tailstock Chip conveyor Bar feeder IEMCA BOSS 545/32 E

Condition: used, Year of construction: 2013, DOOSAN LYNX 300 M TURNING CENTER POWERED YEAR: 2013 SWING OVER BED: 651 mm SWING OVER CROSS SLIDE: 461 mm RECOMMENDED TURNING DIAMETER: 254 mm MAX. TURNING DIAMETER: 370 mm BAR CAPACITY: 76 mm TRAVEL: X: 255 mm Z: 790 mm SPINDLE SPEED: 3,500 RPM SPINDLE MOUNT: ASA – 8 TOOL MAGAZINE: 12 POSITIONS TAILSTOCK Hodey Skv Hepfx Amgsn NO. 2 POWERED TURRETS INCLUDED (RADIAL + AXIAL) CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION READY FOR DELIVERY

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Hodpfx Aeqzhfxsmgon Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 51 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC lathe with a tailstock, in good condition, manufactured in 2015. It operated for 2 years in medium-volume series production and has since been used for smaller series and custom parts. Hsdpfxey Uwgqo Amgon The machine is equipped with a chip conveyor, tool probe, and a chuck with collet chuck mounting. It also includes an LNS bar feeder, capable of handling bars up to 1.5 meters in length (included in the price). Other features include: part ejection, part catching and removal system, tool load monitoring, and an oil separator that extends the coolant's lifespan. It has a highly rigid, cast iron machine bed and a turret with 12 tool positions (24 positions in total). The dimensions refer only to the lathe itself. Weight: 2900 kg (the bar feeder has a separate weight). Net price. If you have any questions or require further information, please send us a message.

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg Hodpfxey Sblrj Amgon

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: Hsdpfx Amjxq R Evegen - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment. Hedpoy Dunwjfx Amgon

Condition: like new (used), Year of construction: 2018, Doosan Puma 2600, year 2018/11 Fanuc Excellent condition, only 1000 operating hours Max. turning diameter: 481 mm Max. turning length: 790 mm Chuck: 250 mm Hedpoy Snuysfx Amgon Spindle bore: 76 mm 12-position turret Tailstock Chip conveyor Documentation

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Hsdevri I Aopfx Amgjn Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: new, Year of construction: 2024, NEW, unused machine!!! DN SOLUTIONS PUMA 5100LMB Year of manufacture: 2024 C-axis with driven tools Control: FANUC OiF touch Chuck: 21 inches (535 mm) Spindle bore: 166 mm Travels: X – 362 mm Z – 2,155 mm Hsdjy H D Ufopfx Amgjn Maximum turning length: 2,002 mm Maximum turning diameter: 650 mm 12-position head BMT 75 Knoll chip conveyor

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, Hjdpfx Ajwnfzcomgjn 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Hedpjy E Ixxefx Amgsn Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Cromar chip conveyor Machine documentation

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor Hedpfx Amoymdt Tegon . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt . Static and driven tool holders

Condition: as good as new (ex-display), Year of construction: 2022, CNC lathe Doosan Puma GT2100M, year 2022/10. Condition: new machine, showroom unit. Equipped with a Cromar chip conveyor. Hsdpfsy Azrasx Amgsn

Condition: good (used), Year of construction: 2014, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Hjdpfx Amswtg Inogen Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg Hsdpfx Amowtg R Asgen