Used Emco Maxxturn 95 for sale (148)

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB Njlhcevdt Tyocqrjcr main spindle: turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm tool turret: number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 Driven tools: output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min travel: x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: good (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: S6AT2502, travel distance X-axis: 250 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 5,000 rpm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,000 mm, tool mount: 30 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of slots in tool magazine: 12, Equipment: chip conveyor, rotational speed infinitely variable, Equipment Highlights: - With Y-axis and counter spindle - Tool turret with 12 stations, all driven - Tool holder: VDI 30 - Chip conveyor included - Incl. three-jaw chuck (RÖHM, Ø 250 mm) Technical Specifications: Travel: - X-axis: approx. 250 mm - Y-axis: +40 / -40 mm - Z-axis: approx. 600 mm Drive & Power: - Max. drive power: 6.7 kW - Main spindle speed range: 0–5,000 rpm - Y-axis feed force: 7,000 N - Rapid traverse: 12 m/min Counter spindle: - Chuck diameter: max. 200 mm - Speed range: 0–7,000 rpm - Travel range: max. 580 mm Noljwd U A Uehccqrocr Electrical: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 85 A

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Nelhccqev I Uavjrocr Counter spindle slide plate + wiper have been replaced New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: good (used), Year of construction: 2008, Functionality: unexamined, turning length: 480 mm, turning diameter over cross slide: 300 mm, turning diameter: 300 mm, spindle speed (max.): 6,300 rpm, spindle bore: 42 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, torque: 43 Nm, bar passage: 42 mm, Offering a used Emco Maxxturn 45 for sale. Equipment: -Short loader LM800 -Y-axis -Counter spindle -Driven tools -Parts collecting device -Siemens 840D control Spindle head KK5 DIN 55026 Speed range - main spindle 0 - 6,300 min/-1 Drive power - main spindle 8 / 13 kW Speed range - Counter spindle 0 - 6,300 min/-1 Drive power - Counter spindle 7 / 10 kW Travel paths: x-axis 160 mm y-axis +40 / -30 mm z-axis 510 mm Tool turret: Number of tool positions 12 pos. Tool holder VDI 25 Shaft diameter of the drills 25 mm Nslhsvyghpeccqrecr Speed range - driven. Tool position max. 6,000 min -1 Drive power of driven tool stations 4 kW Max. torque 16 Nm Feed rates: Rapid traverse X: 24 / Y: 10 / Z: 30 m/min Feed force X: 4,000 / Z: 6,000 N Acceleration X: 6 / Z: 8 m/s² Total power requirement 25 kVA Machine weight approx. 4.0 t Space requirement approx. 5.5 x 2.5 x 2.5 m CNC - turning and milling center EMCO - MaxxTurn 45

Year of construction: 2005, Condition: ready for operation (used), Control Unit Brand Siemens Model 840 D Main Drive Spindle speed range 0-5000 Tool taper VDI 30 Number of axis 4 Movement X-Axis Movement 260 mm Y-Axis Movement 80 mm Z-Axis Movement 610 mm Ncolhccqjup Iqasrer Workpiece Workpiece drm 65 mm Tools Slots in storage 12 Media Chip conveyor Yes Additional Equipment Hainbuch collet chuck on main and counter spindle Parts catcher 10 tool holders (2 axial, 2 radial, and 6 normal holders) Emco LM 1200 loading magazine This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information. Application Types Turning

Condition: used, Year of construction: 2014, turning length: 480 mm, turning diameter: 300 mm, spindle speed (max.): 6,300 rpm, spindle bore: 45 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 1,000 m/min, rapid traverse Y-axis: 1,000 m/min, rapid traverse Z-axis: 1,000 m/min, torque: 43 Nm, bar passage: 45 mm, spindle nose: KK5, The perfect solution for economical machining of inserts or bar material up to a diameter of 45mm. Equipped with a counter-spindle, driven tools, a high-precision C-axis and high rapid traverse, the MaXXturn 45 offers everything you need to produce complex turning/milling parts properly and as efficiently as possible. Notable is the very rigid construction of the Y axis with wide stroke. The MaXXturn 45 has a Fanuc 31i control equipped with Manaul Guide. For many a toolmaking shop, this is an ideal and favorable machine. There too, a takeover spindle and a highly accurate and rigid Y-axis can be of great added value. This EMCO comes standard with; Bar feed interface Product collection device 25 Bar coolant pump Flushing gun Hainbuch collet device Spanntop 42 on main and takeover spindle Nslhevu T Theccqrocr Closed cooling system electrical cabinet Foot pedal Tool probe

Condition: excellent (used), Year of construction: 2008, turning diameter 500 mm turning length 550 mm control SIEMEMS Sinumeric 840D x-travel 260 mm z-travel 610 mm bar material dia. 65 mm main spindle speeds: 0-5000 speeds station 1 5000 U/min speeds station 2 7000 U/min c-axis 2 turret (x-stations) 12 y-axis mm toolpiece turning speed range 0-5000 U/min Y-axis (column - cross) mm weight of the machine ca. 5700 t dimensions of the machine ca. 5500 x 2100 x 2100 m The EMCO Maxxturn 65 is in very, very good condition and is delivered without accessories. Ncjlhccqovwgq Ejrsr Y-axis mm Main and counter spindle with 12-position turret with driven tools Speed 0-5000rpm, parts catcher. Operating hours: 240009h / 27000h

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. Nelhccovvtpxsqrecr tool turret - number of stations: 12 (Sauter) electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-AXLE. The tool turret does NOT have a holder for driven tools Distance spindle to counter spindle = 1050mm Counter spindle: A2-6, travel 800mm, spindle Ø 105mm, torque 250 Nm Switch cabinet equipped with Rittal cooler with hinged belt chip conveyor chip tray compressed air gun Machine currently has NO lathe chuck! *

Condition: ready for operation (used), Year of construction: 2007, operating hours: 26,102 h, Functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 510 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! MAXXTURN 65 - versatile options for the complete machining of bar parts thanks to the powerful main spindle, which enables shaft machining with the tailstock TECHNICAL DETAILS Turning diameter: 320 mm Nslhccqot Suzdorjcr Center distance: 510 mm bar capacity: 65 mm Travel X / Y / Z: 260 / 80 / 610 mm Control system: Siemens 840 collet chuck HS / GS: Röhm Steady rest: not available Tailstock: present Chip conveyor: present Bar feeder: LNS Quick Load Servo III, bar length 1 m Belt filter: not available

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 260 mm, rotational speed (max.): 4,000 rpm, Control system: Siemens 840 D Travel: X-260 mm; Z-610 mm max. turning diameter: 500 mm Nslhccot Ekdhoqrjcr Speeds: Main spindle 0-4000 rpm; counter spindle 0-7000 rpm C-axis Y-axis +/-40 mm 12-position turret all driven Tool holder: VDI 30 Speed of driven tools 0-5000 rpm Bar capacity: 76.2 mm Accessories: Hainbuch collet chuck on main and counter spindle, Parts catcher, chip conveyor, Emco LM 1200 loading magazine, flushing gun, various tool holders and attached tools

Condition: good (used), Year of construction: 2009, Machine used only for plastic. thry spindle 95.mm Technical data shown on picture. 27.03.2025. With machine will come another spannpfutter with possibility 80 mm. Njlhcju Ibnqocqrjcr Parts shown by hand not come.

Condition: excellent (used), Year of construction: 1995, EmcoTurn 465 Year of construction 1995 Ncelhjtpambeccqrsr With bar loader FMB and Promot Portal Siemens 840C VDI30 star turret

Condition: ready for operation (used), Year of construction: 2023, operating hours: 255 h, General Data Measurements width 1700 mm Measurements depth 1600 mm Measurements height 2200 mm Machine weight 1970 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 10000 Spindle motor power 7 KW Number of axis 3 Movement X-Axis Movement 350 mm X-Axis Feed Force 2400 N X-Axis Rapid Traverse 24 m/min Y-Axis Movement 250 mm Ncslhccowfikijqror Y-Axis Feed Force 2400 N Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 300 mm Z-Axis Feed Force 4000 N Z-Axis Rapid Traverse 24 m/min Tools Max weight 5 kg Max tool diameter 63 mm Max tool length 200 mm Type of tool holder ISO 30 Additional Equipment 8 bar high pressure coolant device Chip conveyor 500 mm Cleaning gun/multiflow Oil mist separator Tightening bolt SK 30 NC dividing head TANI100 without chuck Manual tailstock for NC dividing head TANI100 Chuck flange for NC dividing head TANI100 Manual 3-jaw chuck 100 mm This 3-axis EMCO Emcomill E350 vertical machining centre was manufactured in 2023. It features a Siemens 828D control, electronic handwheel, and a tool magazine with 20 positions. The spindle speed reaches up to 10,000 rpm, and it includes a chip conveyor and high-pressure coolant device. If you are looking to get high-quality milling capabilities, consider the EMCO Emcomill E350 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Nelhcewd E N Socqrocr Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Condition: good (used), Year of construction: 2007, machine/vehicle number: R2EV3502, TECHNICAL DETAILS Swing over bed: 430 mm Swing over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 – 6300 rpm Spindle torque: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Drive power: 13 kW Rotary axis resolution: 0.001° Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Ncslhccowfdb Noqrjr Number of tool positions: 12 Shaft according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Speed range: 0 – 5,000 rpm Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4,000 / 6,000 N Acceleration time: 0.1 s Positioning spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1,152 mm Height of the machine: 1,940 mm Footprint: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system tank volume: 230 liters Pump power: 0.57 kW

Condition: good (used), Year of construction: 2005, CNC double spindle lathe Emco Hyperturn 665 MC Plus Year of manufacture 2005 Siemens Sinumerik 840D Swing diameter over bed: 600 mm Swing diameter over support: 500 mm Turning diameter: max. 430 mm Turning length: max. 744 mm Distance between spindles: max. 975 mm Travel paths of the upper support: X1/Z1 280/750 mm Travel paths of the lower support: X2/Z2 205/705 mm Counter spindle longitudinal travel: Z3 750 mm Rapid traverse: X1/X2 24,000 mm/min. Z1/Z2 30,000 mm/min. C1/C2 1,000 rpm. Main spindle:: Spindle nose: DIN-55026 KK 6 Spindle bore: 73 mm Bar capacity: 65 mm Spindle drive power: 29 kW AC Spindle speeds: 0 - 5,000 rpm. Spindle torque: max. 250 Nm Spindle indexing: C 0.001° degrees Counter spindle:: Spindle nose: DIN-55026 KK 6 Spindle bearing diameter: 85 mm Spindle drive power: 17/22 kW AC Spindle speeds: 0 - 7,000 rpm. Spindle torque: max. 130 Nm Spindle indexing: C 0.001° degrees Upper tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Lower tool turret: Nslhsvpun Njccqrocr Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Machine weight: approx. 7,600 kg Machine dimensions: LxWxH, approx. 3,400 x 2,550 x 2,300 mm Accessories: 6-axis, CNC double spindle, double turret, turning center. 2 x spindles with C-axis. 2 x tool turret with driven tools. Main spindle with collet chuck for 65 mm bars. Counter spindle with 3-jaw chuck. Bar loading magazine. Part catcher. Finished part conveyor. Chip conveyor. Large amount of tools included! Condition: Should be in very good condition. 2 x machines available! Offer number L-4892 + L-4893

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: V4AY3601, feed length X-axis: 200 mm, feed length Z-axis: 400 mm, controller model: Sinumerik 828 D, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Siemens Sinumerik 828 D Z-axis travel: approx. 400 mm X-axis travel: approx. 200 mm MACHINE DETAILS Dimensions: 4,000 x 2,400 x 2,300 mm Weight: 5 t Operating voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 46 A EQUIPMENT - C-axis included - Chip conveyor included Nelhcjwd R R Ijcqrecr - Conveyor and loading system from EWAB

Condition: good (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: R2AT0402, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, total height: 2,200 mm, total length: 4,000 mm, total width: 1,800 mm, tool mount: 30 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of slots in tool magazine: 12, Equipment: chip conveyor, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz Nolhewd Uwlsccqrjcr - Rated current: 33 A Additional features: - Includes tailstock - Includes 3x three-jaw chucks (Ø 160 mm) Notes: - The tool holders mounted on the turret are not included in the scope of delivery. - The loading robot, which may be visible in photos, is not included in the offer.

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 828 D Main Drive Spindle speed range 50-12000 Number of axis 3 Movement X-Axis Movement 900 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 500 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 24 m/min Table Outer length 1000 mm Outer width 520 mm Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table 600 mm Table load 800 kg Tools Slots in storage 20 Media Chip conveyor Yes Additional Equipment Rinsing gun Cooling medium tray 360l IKZ 15 bar This 3-axis EMCO EmcoMill E900 was manufactured in 2014. A vertical machining center featuring a Siemens 828D control, it offers a spindle speed up to 12,000 rpm and torque of 83 Nm. It has a travel distance of X 900mm, Y 500mm, Z 500mm, and a rapid traverse rate of 24m/min. The machine includes a chip conveyor, a 360l cooling medium tray, and a 20-tool magazine. If you are looking to get high-quality milling capabilities consider the EMCO EmcoMill E900 machine we have for sale. Contact us for more information. Application Types Milling Ncjlhccsu N Nz Usqrsr

Condition: good (used), Year of construction: 2004, Emco ET 420 / double spindle lathe, Year of manufacture 2004, Siemens control, max. bar capacity 26 mm, max. part length 600 mm, Ncolhcer Izbyecqrer 2 main spindles, 2 counter spindles, double bar loading magazine, main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12-fold VDI 16, 4 driven tool stations / turret, chip conveyor, coolant device, parts catcher long parts ( self-made )

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: R2AP3901, CNC Lathe Manufacturer: EMCO Type: EMCOTURN 345-II Year of manufacture: 2003 Center height: 1160 mm Center distance: 700 mm Max. turning length: 510 mm Max. swing over bed: 430 mm Max. swing over cross slide: 210 mm Max. workpiece weight: 30 kg Work spindle: Spindle head according to DIN 5026 Nelhcswfda Sjcqrjcr Size: A5 Spindle diameter in front bearing: 80 mm Spindle bore: 53 mm Max. chuck diameter: 160 mm Bar capacity: 45 mm Max. torque: 78 Nm Support: Tool system DIN 69880 Chisel cross section: 12 x VDI30 Number of bed slides: 1 Number of cross slides: 1 Cross stroke: 100 mm Longitudinal stroke: 310 mm Tailstock: Quill taper: MT4 Quill diameter: 60 mm Main spindle: 1500 rpm Cross axis (X): 3000 rpm Longitudinal axis (Z): 3000 rpm Feed rate: Longitudinal slide min./max.: 0/24000 mm/min Cross slide min./max.: 0/20000 mm/min Rapid traverse: Longitudinal: 24 m/min Cross: 20 m/min For further technical data, see images Control: SIEMENS SINUMERIK 810D With integrated C-axis in the control C-axis (rotary axis): Rotary axis resolution: 0.001 degrees Rapid traverse: 100 rpm Chip conveyor: Manufacturer: KNOLL Total dimensions: 3500 x 2100 x 2500 mm Total weight: approx. 2600 kg

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Nslhccqjwd R Nwjrecr Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck

Condition: good (used), Year of construction: 2007, machine/vehicle number: R2EV3403, TECHNICAL DETAILS Swing over bed: 430 mm Swing over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 – 6300 rpm Spindle torque: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Nslewfb Utohccqrjcr Drive power: 13 kW Rotary axis resolution: 0.001° Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Number of tool positions: 12 Shaft according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Speed range: 0 – 5,000 rpm Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4,000 / 6,000 N Acceleration time: 0.1 s Positioning spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1,152 mm Height of the machine: 1,940 mm Footprint: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system tank volume: 230 liters Pump power: 0.57 kW

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3701, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Nolhccjwfb S Eoqrecr Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3602, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Control type: CNC Turning diameter over bed: 600 mm Njlhccjwd Uudoqrecr Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m