Used Emco Milling Machine for sale (148)

Condition: excellent (used), feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, overall weight: 450 kg, For sale is a universal milling machine from the renowned brand EMCO (Austria). The machine is in very good working order and is equipped with an Elesta digital readout (Heidenhain scales). The machine can be viewed and tested at our premises by prior arrangement. See pictures for technical specifications and dimensions. Scope of delivery: Emco F3 universal milling machine 3-axis digital readout with Heidenhain scales Various SK30 tool holders Operating manual Chip tray The digital display has a small mark. On the 4th seven-segment display of the X-axis, viewed from the right, the middle line is not illuminated, so some numbers look a bit strange, such as 4, 5, and 3, in fact, everywhere the middle line is needed. This shouldn't be a major problem, however, as the display still counts perfectly. Shipping conditions: EXW We can assist with loading. A suitable forklift is available. We would also be happy to recommend a shipping company. Please contact us. As is customary with used machines, any warranty (liability for material defects) is excluded. Pjlhccqsv T Ad Honjgk All information is provided to the best of our knowledge and belief. We reserve the right to make errors.

Condition: excellent (used), Year of construction: 2017, Functionality: unexamined, machine/vehicle number: 173902, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 1,500 mm, total width: 1,100 mm, total length: 1,400 mm, table width: 200 mm, table length: 600 mm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 80 rpm, overall weight: 800 kg, input current: 16 A, - Operating voltage: 3 x 400 V - Frequency: 50 – 60 Hz - Number of table slots: 4 - Tool holder: SK 30 EQUIPMENT: - Three-axis digital readout (Heidenhain) - Collet set included Pjlhccqowdnz Denegk

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table length: 7,000 mm, table width: 4,000 mm, total width: 5,400 mm, distance between stands: 5,400 mm, table load: 420,000 kg, torque: 1,500 Nm, distance table to spindle center: 1,700 mm, spindle nose: ISO50, WORKING CAPACITY Longitudinal (X) 7500 mm Vertical RAM (Y) 1500 mm Cross Crossrail (Z) 4000 mm Column distance 5400 mm Spindle nose - table distance 1700 mm more than 200,000€ spent in 2024 for complete overhauling of heads, and general maintenance CNC Heidenhain iTNC530 CNC SPINDLE RAM section 600x550 mm Spindle power 52 kW Torque 1000/1500 Nm Support 4 integral hardened guides with 24 pads FEEDS Rapid X 30 m/min Rapid Y 30 m/min Rapid Z 30 m/min ATC Positions 180 Max tool diameter 100 mm Max diam with free adjacent space 240 mm Max tool length 400 mm Max tool weight 35 kg Tool taper ISO50 /HSK63E WARKING TABLE Floorspace (LxWxH) 7000x4000 mm Pelswcq Htehccqnsgk Capacity 15,000 kg/m2 PICK UP STATION FOR HEADS Positions 2 HEAD 1 Type DCB6 with automatic thousandth positioning Spindle taper ISO50 A axis 360.000x0.001 ° C axis 360,000x0,001° Max torque 1000/1500 Nm Max speed 6000 Rpm Max power 38/57 kW Coolant Est 6 Bar - Int 40 Bar HEAD 1 Type DW54 - Twin E54 electrospindle head Spindle HSK63E taper A axis ∞x0.001 ° C axis ∞x0.001° Max torque 35.4 Nm Max speed 26000 Rpm Max power 38/57 kW Coolant Est 6 Bar - Int 40 Bar EXTRA Add Head n Yes Floor space 12500x8200x6050 mm High Pressure 40Bar 1000lt. Filtration unit 30/60µm Workpiece touch probe Yes Tool presetter Yes Maintenance & Use books Yes Electrical drawings Yes CE Certification Yes The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2014, Serial No. 143703, digital display, Heidenhain, table, 600 x 200, X/Y/Z travel, 300 x 350 x 200 mm, max. speed 2,200 rpm, machine lighting, steel cabinet with 2 doors, tool carrier system, 3 levels, contents: lot of SK30 tool holders, tool changers Pslhccowazpmoqnegk +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2010, x-travel 0450 mm y-travel 350 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO 40 spindle turning speed range 10- 5000 U/min feeds 10- 5000 mm/min rapid traverse 5 m/min Polhov Anlbjccqnegk total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5 x 2 x 2 m Machine has a EMCO easy cycle positioning control and many accessories.

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand SIEMENS Model sinumerik 840 D Main Drive Number of axis 3 Movement X-Axis Movement 200 mm Y-Axis Movement 150 mm Z-Axis Movement 150 mm Additional Equipment Complete cooling system Pgolhccjwbataoqnek Central automatic lubrication Touch screen, keyboard, mouse, and control panel This 3-axis EMCO Concept Mill 105 was manufactured in 2022. Ideal for precision CNC milling, this machine offers robust construction and modern design. If you are looking to get high-quality milling capabilities consider the EMCO Concept Mill 105 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  -)coolant equipment Poljrgvbpjhccqnegk -)machine lamp Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Pslhcjv Iqbcocqnegk Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm Pelhccqjvc Awrjnjgk z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Year of construction: 2001, Condition: excellent (used), Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Pslhcconab A Nsqnegk Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2013, Digital display Travel X/Y/Z 450/350/400 mm Pjlhccqoupww Asnogk Speed 5,000 1/min Tiltable vertical milling head +/- 90° Clamping surface 800x400 mm Max. Workpiece weight 450 kg

Condition: as good as new (ex-display), Year of construction: 2024, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Peljibd Aljhccqnegk Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 Pgslhcceua E Naeqnek voltage: 380/400 V

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Pelhccqsv Ip Izonegk Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. Pslhccjvbhcdeqnjgk The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: excellent (used), Technical data will be provided later Pjlheibdd Isccqnsgk

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080 Pgslhsdtm Ahsccqnek

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Pgelhcev Ip Alscqnsk Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min Pgslhsibarqsccqnsk rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: like new (used), The machine is in good technical condition, after prior agreement it is possible to test it. CNC milling center EMCO PC MILL 100, Austrian production. In excellent condition, almost unused. The machine is all-cast iron, on ball screws, fully covered, central lubrication, workpiece cooling. Tool change, 10 positions. Spindle cone, ISO 30, very firm clamping. Workpiece size 100x100x130mm. Speed range 30 to 8000 rpm. Accessories - original EMCO vice and set of spindle cones, complete documentation including programming manual, all in Czech. SIEMENS electronics, SINUMERIC 810 M control system. The control system communicates in Czech. Pgelhccswf Hpisqnok

Year of construction: 2005, Condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 260 Z-Axis Movement 610 Media Chip conveyor Yes Additional Equipment Pelhccjwchr Hjqnjgk Bar Feeder: Equipped with Emco bar loader Chip Conveyor: Included Part Catcher: Integrated This EMCO Turn E65 was manufactured in 2005. A horizontal turning machine equipped with an Emco bar loader, chip conveyor, and an integrated part catcher. It features a single turret with driven tools, enhancing its functionality. If you are looking to get high-quality turning capabilities, consider the EMCO Turn E65 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2023, travel -x axis 350 mm travel -y axis 250 mm travel -z axis 300 mm control Siemens - 828D Pgjlhccov R Hxieqnok number of spindle speeds 10.000 U/min spindle drive 7 kW Number of axles 3 St. numbers of positions in the tool changer 20 tool holder ISO 30 Milling machining centers - vertical | EMCO - EMCOMILL E350 is equipped with a tool magazine, a chip conveyor, and a high-pressure coolant system. The machine was first put into operation in 2023 and has only 255 spindle hours. Additional equipment: + 8-bar high-pressure coolant system + Chip conveyor (500 mm) + Cleaning gun / Multiflow + Oil mist separator + Clamping screw SK 30 + Electronic handwheel + NC rotary table TANI100 (without chuck) + Manual tailstock for NC rotary table TANI100 + Chuck flange for NC rotary table TANI100 + Manual 3-jaw chuck (100 mm) The machine is in like-new condition and can be inspected under power. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: EMCOMILLE350 | E 350 | E-350 | EMCOMILL-E350

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Description WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. Pgslhccqevk E Atonjk FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Controlled in 8 axis - x1-x2-z1-z2-c1-c2-y-b axes Accessories: BAR FEDER AND HUGE LIST OF TOLLINGS ON PHOTOS Length: 3400 mm + convoyer , Height: 2300 mm, Width: 2550 mm, Weight: 7600 kg

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Polhccowcht Deqnsgk Additional Equipment Number of tool holders: 12 Tool holders according to DIN69880 VDI 40 Number of driven stations: 12 This 3-axis EMCO VT 400 vertical turning machine was manufactured in 2014. It offers robust construction and precision turning capabilities, ideal for various industrial applications. Consider the opportunity to buy this EMCO VT 400 vertical turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2008, greates pass round over bed 600 mm swing diameter over face slide 500 mm control Siemens Sinumerik 840 PL max. turning diameter 430 mm Max. Turning length 744 mm max. bar material dia. 65 mm travel -x axis 270 mm travel -z axis 750 mm travel -x2 axis 205 mm travel -z2 axis 750 mm travel -y axis 100 (+/- 50) mm main spindle speeds 0 - 5.000 U/min Subspindle speed 0 - 7.000 U/min number of tapers in turret head 2x 12 tool taper VDI 30 CNC Turning- and Milling Center | EMCO - HYPERTURN 665MCPlus with main and counter spindle, C and Y axis, 2 turrets aligned for driven tools, and equipped with a bar feeder Irco Profimat as well as a coolant system Knoll SF 1000/Turbo- 1. The machine has approximately 26,710 hours of production operation. Pelhev Rgzkjccqnogk Scope of delivery / Equipment: + 2 spindles: main and counter spindle with C-axis + 2 turrets for driven tools (each with 12 stations) + Upper turret equipped with Y-axis + Internal cooling + Chip conveyor + Bar feeder Irco Profimat + Driven tools (straight and angled) + Chucks for main and counter spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pieces VDI 30 + Boring bar holders + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN