Used Ersa Soldering for sale (11)

Condition: used, Year of construction: 2023, ERSA VERSAFLOW 3/35 ELITE, vintage 2023. The fully inline selective soldering machine a flux, a preheating and a soldering module with a segmented conveyor system. The machine is equipped as standard to handle all production requirements quickly and efficiently. Machine in great working condition with minimum hours! Specification, pictures and other details upon request. Crjdpexuh Uiefx Af Hok Machine is located in EU!

Condition: good (used), Year of construction: 2020, Inline reflow soldering under vacuum System was in operation until dismantling Available now; commissioning can be carried out by the manufacturer after consultation. Serial number: R036A-20D0012 Year of manufacture: 2020 Dimensions: 8,063 x 2,205 x 1,969 mm (L x W x H) Weight: Approx. 5,000 kg Rated power: 138 kW Continuous power during operation: approx. 14 - 25 kW Extraction capacity: 2 nozzles, 400 m³/h each Transport system: Working width: 100 - 630 mm, center support PCB length: 120 - 400/600 mm Process zone: Inlet 1,011 mm Heating zone with vacuum 4,600/4,750 mm Cooling zone 1,400 mm Outlet 730 mm Heating system: 4 cooling zones 11 heating zones, including: 9 convection heating modules Top/bottom preheating zone 2 convection heating modules top/bottom soldering zone Vacuum chamber: 400 mm Credev Inw Ujpfx Af Hok Chamber volume: approx. 110 l / 150 l Pump power: up to 5.3 kW Ultimate pressure: up to 10 mbar

Condition: used, Year of construction: 2011, Operational condition machine. Two pots. Variable Z system. One lead free (SAC 305) and one leaded (Sn63Pb37). If needed, the inner pot can also be made lead free with additional cost. Codpfxowzr Age Af Hjrk Can be bought with nitrogen generator. Ask for additional details!

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Credpfx Aev Ta Hlsf Hek Dynamic preheating at the bottom Convection heating

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Ask for additional details! Crjdpfx Aewnfbvof Hjk

Condition: used, Year of construction: 2006, -Spray fluxer -2x medium-wave preheating cassettes -1x dynamic preheater -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system Credpfx Afewcf Rae Hok -Roller buffer at the outfeed -Motor-driven infeed conveyor with chain Ask for additional information.

Condition: used, Year of construction: 2013, Segment: Fluxer Storage space for flux canister under the fluxer Alcohol-based flux Segment: Preheating Medium-wave heating from below, convection from above Segment: Pre-warming 8 quartz radiators, controllable in groups of 4 Segment: Preheating + Divided Solder Pot Long-wave heating plate Solder nozzle with leaded solder, 1st section Solder pot with lead-free solder, 2nd section (out of operation) Codpfx Afjv Sy Ake Herk Availability in end of Q2 2025. Ask for additinal information!

Condition: good (used), Year of construction: 2009, functionality: fully functional, - Patented LIST Lina Scan technology for substrate alignment and inspection - Simplest program creation by full-surface substrate scanning - Processing of large substrates – 550 x 500 mm - Detection of synthetic fiducial marks or any geometries - Diffuse and direct camera illumination for optimal substrate recognition and alignment - Two independent, pendulum-mounted print heads - Programmable print head with closed-loop control - Pneumatic squeegee clamping prevents loosening during production - Substrate fixation via Ovar-Top and Y-clamping, secure clamping even for interwoven substrates - Motorized transport width adjustment, programmable via software - Transport direction freely selectable - Flexible stencil holder for various sizes, no adapter needed; substrate support via magnetic pins and blocks - Desktop PC with Windows operating system, 17" TFT monitor. Machine programs and SPC data can be managed over the network - SPC data is graphically displayed to the operator and stored on the hard drive - AOI Automated Optical Inspection - Integrated print post-inspection with LIST - Very simple programming of the inspection area via substrate overview image on the monitor Crsdpewtqdgofx Af Hjk - Definition of areas with different sensitivity settings - Post-inspection of PCBs for pad print and bridging between pads - Stencil inspection for blockage of openings - Error display on the monitor for easy operator verification - Automatic cleaning cycle after detected stencil blockage - Inspection speed: 9100 mm (width: 260 mm x 35 mm/s) - SPC data acquisition - 2D inspection - Print format: min.: 80 x 50 mm, max.: 460 x 460 mm - Parallel process max.: 350 x 460 mm - Stencil size: min.: 450 x 450 mm, max.: 737 x 737 mm - PCB thickness: 0.5 – 6 mm - Squeegee pressure: 260 N - Cycle time: 11 s + print - Setup time < 3 min - Product changeover < 2 min - Transport height: 810 – 965 mm - Air supply: 5 – 6 bar - Temperature and humidity sensor - SMEMA inline interface - ESD kit

Condition: new, Year of construction: 2025, machine/vehicle number: SN: R050A-24E0011, Consists of 5 preheating, 2 peak, and 2 cooling zones at the top and bottom. Heating length: 2610 mm Cooling section: 735 mm Run-out area: 775 mm Csdpfxsww Etwj Af Hjrk Automatic chain lubrication (freely programmable intervals) Industrial PC with Windows 10 Process visualization incl. monitoring functions incl. soldering protocol incl. process data recorder incl. maintenance and fault notification display incl. password protection Exhaust air monitoring

Condition: used, Year of construction: 2011, Preheating: 4 zones at the bottom • Heating Section: 1,650 mm Crsdpfx Afov Sy Rue Hjk • Active Cooling Section: 800 mm (2-stage from above) • Chain Pin Transport System: 5 mm pin length with center support • Transport Speed: 0.2 - 2.0 m/min (Realistic for BF products: 0.5 - 0.6 m/min) • Working Width: 50 - 500 mm • Electronic Control: For width adjustment and center support • Clearance Height: +35 mm / 25 mm • Inlet & Outlet Length: 700 mm each • Condensate Management / Process Gas Cleaning in cooling zone • Automatic Chain Lubrication • ERSAsoft and EPOS Basic Module • Inline Compatible • SMEMA Compliant • Transport Height: 940 - 965 mm Available from end of Q2 2025. Ask for additional information!

Condition: not inspected (used), Year of construction: 2004, 3mm chain conveyor, central support, internal chiller, SMEMA Ask for additional information! Cjdpfx Afjvpv Ecj Hork