Used Felder Panel Saw for sale (122)

Condition: like new (used), Year of construction: 2021, Felder RL-140 clean air extraction unit with a maximum air volume flow of 2,500 m³/h. Ijdpfxex S I Ite Ahuoht Technical specifications: - H3 dust tested - Extraction connection Ø 140 mm - Extraction possible on both right and left sides - Manual chip shaker - 10 m² filter surface area - Max. volume flow 2,500 m³/h - Minimal space requirement 1,040 x 898 x 1,940 mm (L x W x H) - From school operation

Condition: ready for operation (used), Year of construction: 2000, Felder RL-160 clean air extraction unit with a maximum volumetric flow rate of 3200 m³/h. Technical data: - Max. volumetric flow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust tested Ihodsx S I D Uopfx Ahuet - Year of manufacture: 2000 - From a school operation

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm Ijdpfx Aoww Hhvjhusht - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: excellent (used), Year of construction: 2016, Clean Air Extraction Unit RL 250 Year: 2016, low operating hours 5.5 kW motor Pneumatic filter cleaning 250 mm duct connection Filter area: 50 square meters Chip container volume: 2 x 250 liters Dimensions: 2640 x 1200 x 2260 mm Weight: 785 kg Ihsdox Ruhwopfx Ahujt

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Iodpfxoh Hp Hyo Ahuoht Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Ihodpfxox H Ud Ro Ahuot Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Isdjxta Dyopfx Ahuoht Location: Supplier

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Ihjdsxta Dmepfx Ahust

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. Iodpfx Ahjxg Ehdsuoht The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: excellent (used), Year of construction: 2018, Edgebander Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Isdsx Niuvopfx Ahuoht Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Ihsdpevw Ebpjfx Ahuot Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Subject to price changes, errors, and misprints. Ihsdpfxewzzfkj Ahust

Condition: used, 4-way combi fields BF5-41, year of manufacture 1988, good condition, new aluminum format table, 3 kW, 4 knives, approx. 600 kg Ihsdpfxsvrviye Ahujt Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Ihsdpfovrvkdox Ahujt Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 220.02.004.25, The machine was purchased in January 2025 / delivered in April / used from April to July 2025. For sale due to redundancy following a merger with another joinery. The machine is like new. It features an infeed table with an air cushion, Edgebanding width up to 60 mm and solid edging up to 6 mm thick. Edge thickness milling unit Hot melt granule gluing station Edge trimming unit: ABS 2 mm / solid 6 mm Iodpex Itpzjfx Ahusht Curve trimming unit for doors Surface scraper unit and edge scraper unit Cleaning unit 3 spray stations: antistatic / anti-scratch for edges / cleaning. Full details of all tools are listed on the attached purchase invoice.

Condition: used, AD Planer Hammer A3-31, good condition Ihjdjwzzhfepfx Ahuot Price changes reserved, subject to errors, printing and typographical mistakes.

Condition: used, Year of construction: 2004, used, excellent condition low operating hours from school use including slot mortising unit Iedpfx Ahjx Ni Eheujht including transport and assembly trolley Make: Felder Model: AH751 Year of manufacture: 2004 GS certified CE type-certified GS wood dust tested Motor: 5.5 kW Planing width approx. 510 mm Planing height approx. 200 mm Table length approx. 2100 mm Bridge guard Table extension motorized brake Number of knives: 4 pcs Felder / Brück reversible knife system Feed: 6 + 12 m/min Digital display for planing height electric height adjustment with fine-tuning Integrated extraction hood Extraction connection: D 120 mm Required space: approx. 2100x1000x1100 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in its current condition as inspected without warranty or guarantee

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Ihedpfx Ahoxlt Sheuot Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: ready for operation (used), functionality: fully functional, Sale of a Complete Production Line for Aluminium Frames & Insect Screens Ideal for Window Manufacturers, Trade Businesses & Producers For sale is a fully coordinated set of machines and workshop equipment for the production of: - Aluminium frames for wood-aluminium windows - Renovation aluminium frames - Insect screen tension frames This equipment is suitable both for established companies aiming to expand their manufacturing depth and for start-ups or newcomers looking to acquire a ready-to-operate production line. Special Features: - Preferably sold as a complete package Ihodox Nbnhjpfx Ahuot - Partial sale of individual machines possible - Field-proven, functionally coordinated machinery - Independent in-house production possible - Significant cost savings compared to new purchases Training, Instruction & Know-how Transfer: On request, I offer the buyer personal training and onboarding. The goal is to share expertise accumulated over decades. Training can include: - Introduction to the complete production process - Optimal machine settings - Efficient manufacturing - Avoidance of common errors - Assistance during commissioning Buyer Benefits: - Immediate start of production - Reduction of dependency on suppliers - Expansion of product portfolio - High value creation - Know-how transfer included Reason for Sale: Sale is due to age and a career change. Further Information: - List of machines and details upon request - Scope of training by arrangement - Collection by appointment If interested, please get in touch. I am open to all inquiries and arrangements.

Condition: used, Edgebanding machine Tempora F 60.06 - Year of manufacture: 2018 - Jointing cutter, radius cutter, scraper for radii and surfaces - Cleaning and release agents - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm - Sawing/trimming unit Iedpfxsx Ha I Ue Ahujht

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa Isdpfx Aex Enr Eohueht - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Ihjdpfx Aewu D A Eehujt Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Ihedpfxjx D Ex Rj Ahuot Application Types Other Woodworking Machinery

Year of construction: 2008, condition: ready for operation (used), General Data Measurements height 250 mm Measurements depth 1700 mm Dimensions Machine Length 3530 mm Main Drive Spindle Speed 24000 RPM This 3-axis CNC processing center manufactured in 2008 features a robust Felder Format4 Profit 2.s with a working area of X=3530 mm, Y=1700 mm, and Z=250 mm. It achieves speeds up to 60 m/min in X and Y, and 15 m/min in Z. Includes a mobile dust extractor Felder RL200, enhancing operational cleanliness and efficiency. Consider the opportunity to buy this Felder Format4 Profit 2.s CNC processing center. Contact us for more information about this machine. Application Types Ihjdpfsx D Hqnsx Ahust CNC Wood Machining

Year of construction: 2021, condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 4000 mm Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Ihjdpfxjx D D Hms Ahust Application Types CNC Wood Machining