Used Homag Double End Tenoner for sale (469)

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Bwjdpfoylp Sljx Ah Iei Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Homag Edgeteq S 300 / KDF 440 C Edgebander Variable feed speed 8–14 m/min Boomerang TFU 140/20 interface Upper roller pressure Separating agent spraying unit for workpiece Joint trimming unit 40 mm joint cutter set Bodpfoymz T Rex Ah Ijwi Interface for Baltivan pre-melter QA65 N 1200 / 1400 gluing station Coated tank for EVA/PU adhesives Edge magazine for 3 mm and up Edge thickness up to 8 mm Pressure zone with 2 additional pressure rollers Front and rear edge lubricant End trimming unit Antistatic solution spraying system Multi-stage trimming unit Copying / profiling unit Multi-stage scraper MZ40 unit Workpiece cleaning agent spraying unit Brush unit with 2 motors PowerTouch control system The machine is sold without tools Only approx. 1,300 operating hours! Available April 2026

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026 Bodpfxsx Rcdae Ah Iowi

Condition: good (used), Power supply, control board, input board, control unit, edgebander, edgebander Manufacturer: Homag Homematic -Type: 2Type: 2083027006 -Number: 5 tax cards available -Price: per piece -Dimensions: 20/195/H265 mm Bwedpfx Ahscczk No Iei -Weight: 0.34 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: 3225 mm Working area Y: 1500 mm Z-axis travel: 300 mm, maximum workpiece thickness 60 mm Work tables made of 6 support bars Machining unit, C-axis for 360° horizontal machining, tool holder HSK F63 Drilling unit: Vertical drilling head with 17 vertical spindles Saw blade aggregate, diameter 125 mm Horizontal trimming aggregate for lock cases with 4 spindles 12-position tool changer woodWOP 6.0 software Safety mat 1 vacuum pump Includes 2 aggregates (Flex5 and door routing), without suction cups! Machine in excellent condition Bwodpfsyl U Hbox Ah Ioi Available June 2026

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes Bsdpfx Ahox Ei Sye Iswi - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, Ferwood code: RU0009932 - Manufacturer code: 4-014-12-0207 - Condition: Used - Functionality: Fully operational - Compatible machine: - If interested, we offer an overhaul service. Please contact us. 1KG - 20X20X20 Bwsdpjyk Edujfx Ah Iji

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Comprising: - Feeding table Profi TBL100/20/06 (HOMAG, year 2014) - Profile KAL310/7/A3 (HOMAG, year 2014) The KAL is suitable for processing coated wood-based materials: - With melamine edges 0.3-0.4 mm - With ABS and PP edges 1.0-2.0 mm (tools available: R 1.0, 1.5, 2.0) The machine is additionally equipped with a grooving unit for vertical and horizontal grooving and rebating. Bwodpfx Aheqi Hqio Iei If interested, the complete order confirmation can be provided. The machine must be dismantled and loaded by the purchaser.

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Bwodpfjwd Itmsx Ah Isi Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2008, A CNC woodworking center Homag is available. Travel path X/Y/Z: 4000mm(4200mm)/1235mm/182mm, machine dimensions X/Y/Z: approx. 8000mm/5500mm/2950mm, operating hours: approx. 33226h. The machine is impact-sensitive at the terminal, and the laser shows problems with stone detection. Including spare operating equipment, chiller as well as various clamps and suction units. Documentation available. An on-site inspection is possible. Bwsdsyddz Sspfx Ah Iei

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 0-250-11-2763, Used drilling center Optimat BHX 055 Built-in features: □ Horizontal drilling head with 4 spindles (X axis) □ Horizontal drilling head with 2 spindles (Y axis) □ Drilling head with 13 spindles □ Grooving saw D=100 mm (X direction) □ Pneumatic positioning stopper for workpiece alignment □ Workpiece clamping system Units / Equipment: □ 10 kW milling motor with frequency inverter (HSK63) □ 4-position tool magazine □ WOODWOP 7 software Workpiece dimensions: □ Maximum: 3050 × 850 mm □ Minimum: 200 × 70 mm □ Material thickness: 12–60 mm Bedpfox Tz Shox Ah Iowi General information: Year of manufacture: 2018 □ POWERCONTROL with POWERTOUCH system □ CE marking □ Condition: ready for operation / demonstration possible □ Availability: in stock Documentation: □ Language: Polish □ Documentation: paper + digital media

Condition: new, Year of construction: 2021, machine/vehicle number: 0-250-87-1000, functionality: fully functional, Equipment: CE marking, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Standard features •Drilling head with 13 spindles •Horizontal drilling head with 4 spindles in X-direction •Horizontal drilling head with 2 spindles in Y-direction •Grooving saw D=100 mm (X-direction) •Stop cylinder for workpiece positioning •Workpiece clamping system •Workpiece length: 3050 mm •Workpiece thickness: 12-60 mm Machine operation •WOODWOP 7 FOR MACHINE •Milling motor with frequency inverter 5kW (ETP) Documentation •Selected language: Polish, English, German •Documentation on data carrier, paper documentation Bsdpfow U Ty Ssx Ah Ijwi General information •Year of manufacture: 2021 •Control: POWERCONTROL with POWERTOUCH system •CE-marked •Status: Ready for operation / can be demonstrated •Available in stock

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Horizontal drilling head with 4 spindles on X Horizontal drilling head with 2 spindles on Y Grooving saw D=100 mm Stopping cylinder for workpiece positioning Workpiece clamping system Workpiece length 2500 mm Bsdjvtyc Hspfx Ah Ijwi Workpiece thickness 12-60 mm WOODWOP for machine WOODWOP IMPORT DXF BASIC (1 license)

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: 0-261-04-6440, functionality: fully functional, Feeding and removing of workpieces: • Pressure beam with rollers • Variable feed speed 8-14 m/min • Automatic grooving fence • Glue pot QA65 Edge banding: • Multifunctional profile scraping unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool Bwodpfx Aheykzdko Iei Finishing of the workpiece: • Anti-adhesive and cleaning fluid • End trimming unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit • Prepared for connection to a return system Documentation • Selected language: Polish • Documentation in machine control, in printed form General information • Year of production: 2019 • Machine length: 5573 mm • HOMAG control - POWER TOUCH • CE mark • Processed meters: 800,000

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with extensive features and in notably excellent condition. — Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Traversing paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix nesting or console table • Optional: edge banding and labeling — Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is available immediately. Dismantling and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors excepted. Bwjdpexk Tumjfx Ah Iei

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Bwedpfx Aeqvnl Tsh Isi

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Bwedpfxew Idhmj Ah Iji Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Bjdpjx A Th Dsfx Ah Iowi Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 7 nr

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Bedpfex A Thqex Ah Ijwi

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8 Bsdpfx Aeygtcqjh Iewi

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Bwodpfx Asx A Hbkeh Ioi Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Bodpfxeyfw Syj Ah Iewi Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: excellent (used), Year of construction: 2017, HOMAG CNC throughfeed drilling machine BHT500 Portal machining center for processing workpieces made of wood or wood-based materials. - Powercontrol System WoodWOP - 17" TFT display - Vertical drilling units with up to 38 drilling spindles Bwsdpjx Rt Atsfx Ah Ioi - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X axis - Workpiece dimensions: length 250-2500mm / width 100-1400mm (or 2x 600mm) / thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2017 - Immediately available

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Bwodpfxjt Hmtze Ah Iei Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Bwjdpfxjvxxuxj Ah Iji Maximum panel thickness: 60 mm Operating Units: 7 nr