Used Holzher Edgebander for sale (159)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 10 m/min, overall weight: 1,200 kg, workpiece length (max.): 250 mm, workpiece width (max.): 65 mm, TECHNICAL DETAILS Gisdpox Rbm Hsfx Aa Iol Edge band thickness min.: 3 mm Edge band thickness max.: 6 mm Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 65 mm Panel width max.: 65 mm Panel length min.: 160 mm Panel length max.: 250 mm Feed speed min.: 10 m/min Feed speed max.: 10 m/min MACHINE SPECIFICATIONS Dimensions & Weight Dimensions (L x W x H): 4,630 x 1,600 x 1,770 mm Weight: 1,200 kg Number of transport packages: 1 piece Voltage: 400 V Power consumption: 29.37 A Fuse protection: 35 A EQUIPMENT Pre-milling unit - Type: FG 201 - tools included Glue application unit - Type: 1903 Pressure rollers - Type: 1812 - tools included End trimming unit - Type: 1918 - tools included Rough trimming unit - Type: FR201 - tools included Corner rounding unit - Type: 1832 - tools included Radius scraping unit - Type: 1964 - tools included

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2128, feed rate X-axis: 18 m/min, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment - iTronic – automatic pressure and glue quantity control - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 Gijdpfx Aex Nqn Rja Iol - Milling unit FR701 Mot6 multi - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Gisdpfjx H Sutox Aa Iol

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Holz-her Lumina 1380 Edgebander with return conveyor Max. edge banding thickness: 8 mm Max. panel thickness: 60 mm Max. thickness of rolled material: 3 mm Min. workpiece length: 160 mm Min. workpiece width: 60 mm HOLZ-HER GLU JET adhesive system Spraying unit Calibrating units Pre-heating End trimming/cross-cut stations Milling stations for trimming/radius/chamfering Corner rounding units Gjdox Nnbbjpfx Aa Ijil Edge scraper Brush unit Holz-her Edgecontrol control system

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control Godpfex It Hmjx Aa Ioil large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2014, • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic Giedpfjx Huhcsx Aa Ijl (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Fully functional , Giedpfoxz Icgex Aa Iol Can be tested ,

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Giedpfx Asw Ebrxoa Isl

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): Gsdpewn Nuajfx Aa Isil ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish.

Condition: excellent (used), Year of construction: 2020, 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Gjdpfjxayvpex Aa Ioil Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and technical data: Base machine Streamer 1057XL, 200-400 V / 50 Hz, with manual pressure beam adjustment Extendable XL workpiece support, spacing 600 mm Godpfjx Twh Ejx Aa Ioil Joint milling unit FG201 with 2 milling heads for jointing the panel edge Diamond cutter, diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System Diamond cutter, diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System Edge feed 1903, automatic transport of roll and strip material Gluing system Glu Jet GJ301 (2.3 kW, 50 Hz), automatic glue height adjustment (contact nozzle) Automatic reloading function Pressure unit 1912-3, pneumatic, first roller driven with pneumatic immersion control End trimming unit 1918 (60 mm), pneumatic, bevel trimming 0/10 degrees, pneumatic adjustment Extraction hoods for end trimming unit 1918 Multifunctional routing unit FR 201 for flush, radius as well as radius tracing, incl. DIA cutters Corner rounding unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), corner rounding function up to 3 mm edge thickness Diamond cutter, diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, with CM technology (Leuco system), with integrated chip extraction, for profile milling unit 1832 Scraper unit 1929 Chip container KPL, diameter 120 – 1929+1964+FK70 HW reversible knives for scraper holder R = 2.0 mm (2 pcs. required) Flat scraper FK 701 for removing glue residues for a clean joint Spraying device TR 201 for infeed and outfeed area Buffing unit 1940 (2 x 0.09 kW, 50/60 Hz, 1,400 rpm) for post-cleaning and edge polishing, with 2 textile discs, swivels 0 – 5° Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 – 45 (60) Edge thickness (mm): 0.4 – 3 (6) Feed speed (m/min): 10 Total length (mm): 4,630 Weight (kg): approx. 1,440 Availability: short-term Location: Flörsheim

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Gedpfxoxf H Rdo Aa Ieil Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: used, Year of construction: 2009, operating hours: 2,216 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Operating hours: 2216 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit Gisdpfex Aq Dpsx Aa Iel - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, HolzHer Edge Banding Machine 1436SE Year of manufacture: 1997 - PVC Primus, 3mm PVC cartridge system - Edge banding, flush cutting, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700mm x 1400mm; Height: 1650mm - Weight: 1300kg - Working dimensions: Length: 4500mm Gisdpfjwv Uq Aox Aa Iol Depth: 1020mm Height: 1630mm - Connection nozzle: 140mmØ - Minimum workpiece width: 60mm - Feed speed: 11m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8mm for strip material, 2mm for coil material - WITHOUT pre-milling unit

Condition: good (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Technical data: - Cutting length approx. 5300 mm Godpjx Svzhofx Aa Isil - Cutting height approx. 2200 mm - Cutting depth approx. 80 mm - Saw blade diameter max. 300 mm - Motor power: 4 kW

Condition: used, Year of construction: 1988, Cutting width: 5,300 mm Trimming height: 1,950 mm Cutting depth: 80 mm Saw unit swiveling: 90° Motor power: 4.6 kW Saw blade speed: approx. 4,420 rpm Saw blade diameter: 300 mm Weight: approx. 1,200 kg Storage location: Nattheim Godpfx Aaex Rb Sco Ioil

Condition: used, Used machine Giodpjx Rr D Aefx Aa Iel Features and technical data: - Cutting length: 5,300 mm - Cutting height: 2,200 mm - Automatic machine Availability: by arrangement, approx. 2-3 weeks Location: North Rhine-Westphalia

Year of construction: 2011, condition: excellent (used), Operating hours 1,523 hrs. - Edge thickness max. 8mm - PLC control (program controlled) - glue height max. 60 mm - Joining unit in synchronous and counter-rotation (with diamond tools) - Gluing station cartridge - Pneumatic pressure unit - cross-cutting station pneumatic swiveling to 10 - Milling station motor adjustable (MOT4) DIA- tool - Keying station vertical pneumatic adjustable - swiveling pneumatic - Corner copying unit (diamond tool) - Radius scraper with motorized adjustment (MOT 2) - Surface scraper Dimensions: 454 cm length 120 cm width Giodpjma Sg Rsfx Aa Iel 161 cm height (upper edge of control panel)

Condition: used, functionality: fully functional, Large wall saw Gijdex I A D Ijpfx Aa Iel

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 561, cutting length (max.): 3,100 mm, cutting height (max.): 95 mm, cutting width (max.): 3,100 mm, feed rate X-axis: 100 m/min, saw drive: 11 W, warranty duration: 12 months, Equipment: scorer, HOLZ-HER Pressure Beam Saw Tectra 6120 power, year of manufacture 2025, delivery ex works - 1 angular air-cushion table 1800 x 600 mm with 1800 mm stop rail - 2 air-cushion support tables 1800 x 600 mm - 3 feed rollers at the front - 3 double-finger floating workpiece clamps - 4 floating workpiece clamps - Sliding door on the left - Automatic cut length limitation - Pro-Lock quick-change clamping system - Optibase Plus optimization software for office use - Uninterruptible Power Supply (UPS) - Automatic central lubrication - Label printer and software - Hand-held remote control unit - Width stop positioning speed 25 m/min, return speed 100 m/min Giodpfx Aasx Nqrve Iol - Saw carriage feed speed 0–100 m/min, return speed 130 m/min - Scoring motor 2.2 kW - Maximum saw blade projection: 95 mm - Motorized groove height adjustment 0–30 mm - Delivery time: immediately available

Condition: used, Year of construction: 2004, Cutting length: 5300 mm, cutting height: 2200 mm, motor: 4.0 kW, cutting depth: 60 mm, saw blade: 250 mm D. Storage location: Nattheim. Giodpfx Asxr A Nvja Isl

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Single edge feeder Automatic transport for coil and strip material - Glu Jet GJ 301 adhesive application system Automatic glue height adjustment (sensor nozzle) - Pressure unit 1912-3 pneumatic - End trimming unit 1918 (60 mm) pneumatic - Extraction hoods for end trimming unit - Multifunctional milling unit FR 201 - Corner rounding unit 1832 for edge thickness up to 3 mm - Scraper unit 1929 - Chip collection box Giedpfx Aex Rpf Rja Iel - Surface scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4–6 mm Feed speed: 10 m/min Total length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 1999, Cutting width: 5300 mm Cutting height: 1910 mm Gjdpfx Ajxzu Euoa Isil Storage location: Nattheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle Gijdsxymd Tspfx Aa Iel - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: used, Year of construction: 2010, Used machine Gjdpfx Asw I Uhqsa Ieil Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Pressure unit 1913, pneumatic End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim