Used Homag edgebander for sale (431)

HOMAG KDF 530 C

€24,000

Homag KAL310 Edgebander With Return Syst

Call

Condition: ready for operation (used), Technical characteristics Feeding speed 11m/min Composition : Edge feeder in roll form Diamond calibration Edge introduction Cutter Gluing unit Orientable end unit Trimming Scraper Angle copying Brush Programmable control with group indexing Compact machine - complete composition Epaisseur de panneau maxi50mm Epaisseur de panneau mini8 mm Snu7b Epaisseur de chant maxi8mm Epaisseur de chant mini0.4 mm Power and Motors Power: 10.5 Kw Overall dimensions Lenght: 5000 mm Width: 1000 mm Weight: 1900 Kg

more

Listing

77 Five Mile Straight, Maghera BT46 5LQ, UK

6,669 km

HOMAG KAL310

€36,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2008, Homag KAL 210 Edgebander 2008 8sjbdzqchi Hotmelt Glue System Panel thickness 10mm - 60mm Edging thickness 0.4mm - 3mm Variable speed up to 18 meters per minute Automatic edging tape change over (2no coils) Pre Millers End cut off saws 2 motor Rough trimming cutters 2 motor Fine profile trimming cutters Top & bottom profile scrapers Top & bottom glue scrapers with spray cleaning system Buffing unit (No corner rounding units) Panel return system included in price of machine. Machine is in excellent condition and serviced regularly by Homag technicians. Anything this machine ever needed it got! Strong reliable machine and only selling due to upgrade. Machine can be seen working.

more

Listing

HOMAG + TREVISAN VFL610/25/P/A Preforming Profiline

Roreto

8,134 km

Edgebander-PRE-FORMING (DIRECT POSTFORM)

HOMAG + TREVISAN VFL610/25/P/A Preforming Profiline

Call

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) Bcyhxw3kz2n 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

more

Listing

Rajecké Teplice

8,472 km

edgebander

HOMAG EDGETEQ S 380 PROFILINE PUR/EVA

Call

Condition: new, Year of construction: 2023, machine/vehicle number: 0-261-87-5945, PowerTouch control panel Pre-milling 2 x 2.2 kW PUR PREMELTER – melting unit for 2kg PUR cartridges, 2kg EVA granules Adhesive unit QA65N Chopping aggregate obliquely/perpendicularly 2 x 0.35 kW Profile milling unit 2 x 0.55 kW MS 40 for two profiles Shaped friezes. ends (corner) 2 x 0.4 kW MF60 – SERVOTRIM Chisels profile multi MZ 40 for two profiles Flat chisels Polishing discs Weight approx. 3,600 kg Feed variator 8 – 20 m/min Motorized adjustment of the upper pressure Motorized adjustment of the insertion ruler Motorized adjustment of the pressure zone A package of pneumatic conversion of miter saws and surface saws PUR PREMELTER – melting unit for 2kg PUR cartridges, 2kg EVA Exchangeable container EVA 1pc and PUR 2pc Inlet air table 1275 MM X 650 MM Insertion ruler for narrow parts up to a part height of min. part thickness 16mm Blowing device after the pre-milling unit Pggamot Automatic adjustment for 2 x radius and 1 x chamfer for milling unit MS 40, R – 1/ R – 2 mm Blowing device for milling unit MS 40 MZ 40 multi-radius screed with servo-motor adjustment, R – 1/ R – 2 mm Grooving unit MF60 SERVOTRIM speed 20m/min. R – 1/ R – 2mm FLEXTRIM tool for MF60 for radius R – 1/ R – 2mm Blowing device for the MF60 SERVOTRIM cone unit Flat chisels for the glued joint Polishing unit - brushes Exchangeable adhesive unit QA 65 N for EVA, PUR and Polyolefin 1 pc extra! ( 2 pcs in total ) VACUUM CONTAINER FOR STORAGE OF THE APPLICATION UNIT Spraying of the separation agent LPZ/II® before the pre-milling unit prevents the glue from sticking to the surface of the part Spray for lubrication of the pressure unit SEPARATING FLUID FOR FRONT AND REAR EDGE Antistatic spray for edges Injection of cleaning agent LP163/93® in front of the polishing discs Stabilization of voltage in the machine TAPIO connection for PC, Tablet, Android, Apple, IOS applications twinio Basis ¬- Manage your tools digitally and easily license (incl. 30 tools) annual use MachineBoard - Overview of the current status (Live-Status) of your machine, including warnings about error messages annual use ServisBoard - Contact the Homag service through the Tickets service directly in the Apk annual use serviceAssist Classic - annual use + App-Plus-Package - ServiceBoard - MachineBoard - twinio

more

Listing

DE

7,870 km

Edgebander BATCH 1

HOMAG KFL 350/12/A3/L/WZ

Call

Condition: used, machine/vehicle number: 006573, Type of edging: Thin edge, Thick edge Gluing System: PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm C9ytdgm Operating Units: 12 nr

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

7,593 km

Edgebander Homag with return (boomerang)

HOMAG Optimat KAL 310/8/A20/S2

€25,000

Call

Condition: like new (used), Year of construction: 2003, Edgebander Homag with return (boomerang) Type:Optimat KAL 310/8/A20/S2 Serie no:0-200-07-6382 Year:2003 Boomerang Type:ZHR 05/L/095 Serie no:0-305-09-6060 Year:2003 Edgebander Homag with retrun system Boomerang. Machine equipped with: Pre-routers, magazine for edge material on roll 10pcs, hoot melt glue Granulate,cutting units, fine trimmers, profile trimming,corner rounding profile router, skrapers,buffing Max workpiece thickness 60 mm Curfwjukci Feeding speed max 24 m/min Max edgeband 3mm and solid stripe max 20mm Stock no:2001531BXA

more

Listing

Nevers

(dealership location)

7,693 km

HOMAG KDF670

€44,000

Double side squaring edgebander

Call

Condition: ready for operation (used), Technical characteristics Feeding speed 20m / min max Edge height max 65 mm Calibration, gluing with granule pre-melter End cut 2 motors Radial flush and chamfer Copying Band storage NC synchronized aggregate POWER CONTROL 16 control Snu79 Digitized beam height and advance Hauteur de chant maxi65 mm Epaisseur de chant maxi20mm Caractéristiques plaqueuseEnd cut unitBand scraper Power and Motors Overall dimensions Lenght: 6890 mm

more

Listing

$Homag KFL 526\9\A3\30$

Sesto Calende

8,116 km

Homag KFL 526\9\A3\30

Call

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group Be89vk9n9ie

more

Listing

Herschbach

7,752 km

Edgebander Homag EDGETEQ 1130 FC

HOMAG KAL 211 Edition 2274

Call

Condition: good (used), Year of construction: 2012, Edgeband thickness max 20 mm Thickness of coiled edgeband max 3 mm Premilling unit Corner rounding unit 2 motors Universal milling aggregate Scraper unit profile and flat Aggregates actuated by control NC-axes Machine length 7.845 mm Control powerControl PC 22 Edgeband height max 64 mm Electromotoric height adjustment Top pressure by belt Feedrate max 25 m/min Continuously variable feed Glue system granulate Premelting unit Quick-change glue pot Spraying device Trimming saw 2 motors Flush/radius/chamfer milling units 1 Buffing unit Magazine for single strips Type left-side machine Quick-change aggregate(s) CE marking HOMAG FK 11 Bengmvrt3hu HOMAG Infeed system for small parts

more

Listing

Rajecké Teplice

8,472 km

edgebander

HOMAG EDGETEQ S 380/390

Call

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 0-261-73-2291, PowerTouch control panel Pre-milling 2 x 2.2 kW Adhesive unit QA65 Chopping aggregate obliquely/perpendicularly 2 x 0.35 kW Profile milling unit 2 x 0.55 kW - simultaneous multi MS 40 Copy milling unit 2 x 0.40 kW Servotrim Chisels profile multi MZ 40 Flat chisels Polishing discs Length 6,560 mm; weight 3,000 kg; El. input power 29 kW Feed variator 8 – 20 m/min with a 20 m/min copy unit. Inlet air table Motorized adjustment of the upper pressure Motorized adjustment of the insertion ruler Motorized adjustment of the pressure zone Package of pneumatic conversion of miter saws and chisels Automatic adjustment for 2 x radius and 1 x chamfer for milling aggregate MS 40 SERVOTRIM roll forming unit Multi-radius clamp with MZ 40 servo-motor adjustment Flat chisels for the glued joint Automatic feeding of the tape into the gluing area and quick replacement of tapes without interfering with the machine Injection of a separating agent before pre-milling Spraying of the cleaning agent in front of the polishing discs Pre-mills to a height of 60 mm Application system PUR 2 kg Replacement system for pre-melting PUR aggregate for 2 colors Second application unit QA65 for PUR / EVA A system for fine processing of shelves with a copying unit Advanced machine diagnostics system (Powertouch) 2 radius technology for the rolling unit (2 radius tool per surcharge) XES Huzezs0 System for the conservation of 2 x PUR application aggregates Design of a chisels for a special tool Tool for chisels to preserve color Injection of lubricating fluid for edge protection

more

Listing

Moneymore

6,680 km

CNC with Edgebander

HOMAG Venture 320L

Call

Condition: excellent (used), Year of construction: 2015, • Table Lenth: 4200mm • Table width from front stops 1050mm Czwkhnvd • Table width from back stops: 1500mm • Console Table K • LED Positioning readout system • Pneumatic Connections for clamping elements • Main Spindle 12Kw with C-axis • Interface for Flex 5 • 14 position tool changer • Boring head 21 spindle V17/H4/S90 • Gluing unit power edge with pickup station • Gluing unit poweredge • Granular container EVA • Pre-snipping station and simple roll • Hot air nozzle for gluing unit 360 for thick edges • Barcode reading system • Powertouch PC86 • Homag Quality Pack Available end of September

more

Listing

Gorzów Wielkopolski

8,027 km

Homag EDGETEQ S-200 - 1130 FC

€44,000

FCA ONO plus VAT

Call

Condition: new, Year of construction: 2023, Minimum element widths: element with a thickness of 8 - 22 mm 70 mm * element with a thickness of 23 - 40 mm 120 mm * Element 41 - 60 mm thick 150 mm (depending on the length of the element) Element overhang 38 mm Workpiece thickness 40 mm Max. edge height = workpiece height + 5 mm Rolled edge 0.4 - 3 mm Max. cross-section of the rim for PVC 135 mm2 for 100 mm2 veneer Roll diameter 830 mm Operating voltage 400 volts - 3 phases - 50 Hz TOOL SET R = 2 MM SUPPORT FOR ELEMENTS ON A SPHERE CONSTANT FEED 8 M / MIN CENTRAL, MANUAL CHAIN LUBRICATION UPPER PINCH ROLLERS If2xl0rzw GEAR RUBBER ROLLERS 1100-1400 MANUAL HEIGHT ADJUSTMENT X10-X70 APPLY LIQUID AND FORM COMPONENT PRE-CUTTING UNIT 2 X 0.75 KW 200 HZ MILL SET 40 MM TANK WITH COATING SUITABLE FOR EVA/PU ADHESIVE MANUALLY CHANGING THE GLUE TANK EDGE MAGAZINES OF REELS AND TAPE PRINT AREA WITH 2 ROLLERS MANUAL ADJUSTMENT TO EDGE THICKNESS SHUT-OFF UNIT 2 X 0.18 KW PNEUMATIC ALTERNATE PHASE / STRAIGHT CUTTING ROUNDING UNIT 1 X 0.35 KW TOOL FOR CHILLER FF6210 PROFILE CYCLE ZK6420 PNEUMATIC CYCLE CHANGE CLEANING CLEANING ADHESIVE JOINT POLISHING UNIT 2 MOTORS FP 6820 EASYTOUCH CONTROL SYSTEM

more

Listing

Nevers

(dealership location)

7,693 km

Onesided edgebander

HOMAG KDF 670 2C OPTIMAT

€41,000

Call

Condition: ready for operation (used), Technical characteristics glue tank for HOTMELT glue in granules, possible use of PU glue in granules under the conditions of use two directions of rotation of the glue roller: direction of advance or against advance PC 16 electronic control: BRANDT control system with color graphics modem for remote diagnosis soundproof booth max feed speed 14m / min pneumatic connection 6 bar lighting inside the hood motorization of the pressure beam adjustable entry guide motorized adjustment of the entry guide motorized pressure zone adjustment QUICKMELT gluing unit dressing unit 200 Hz 2 x 2.2 kW 48 mm diamond router bit set chamfer / straight end cutting unit 2 x 0.35 kW blowing device trimming unit 2 x 0.55 kW 0-25 ° counterflow motorized adjustment of the side probes pneumatic control of the trimming unit path-controlled blowing device trimming unit 2 x 0.55 kW 0-25 ° advance path-controlled blowing device top and bottom form milling unit scraping unit with quick change pneumatic control for scraping 5760/5736 2-motor buffing unit interface for LIGMATECH ZHR 01 / ZHR 02 / ZHR 15 Epaisseur de panneau maxi60mm Epaisseur de panneau mini8 mm Epaisseur de chant maxi12mm Epaisseur de chant mini0.4 mm Caractéristiques plaqueuseDigitized commandGlue tankEnd cut unitAffleurageBand scraper Power and Motors Voltage: 400 V Bd3fh3ylck Pluging: Three-phased Power: 17 Kw Overall dimensions Lenght: 6860 mm

more

Listing

Bukovica Velika

8,755 km

HOMAG AMBITION 2274

Call

Condition: used, Year of construction: 2016, WORKPIECE AND EDGE PARAMETERS: - Workpiece width without edge min: - With a workpiece thickness of 12-22 mm ¦ 60 mm* - With a workpiece thickness of 23-60 mm ¦ 100 mm* *Depending on the workpiece length - Workpiece overhang¦ 30 mm - Workpiece thickness ¦ 8 - 60 mm - Edge height max.= workpiece thickness¦ + 4 mm - Edge material roll ¦ 0.3 - 3 mm - Edge cross-section max.: ¦ - For PVC ¦ 135 mm² Bcpwcsuasza - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - For the use of suitable materials (boards, glue, edges, cleaning agents, paints etc.) is the responsibility of the machine operator

more

Listing

Moneymore

6,680 km

HOMAG KDF 1230

Call

Condition: excellent (used), Year of construction: 2017, Feed Speed: 11m/min Total Length: 4773mm Edge magazine coil: 0.4mm – 3mm Edge Material Strip: 0.4mm – 6mm Joint Trimming Unit 2X2.2Kw Gluing Unit A6 Panel Pre-Heating Pneumatic 2-point adjustment pressure zone End Trim Unit Chamfer / Straight Pneumatic Adjustment End Trim Unit Trimming Unit 2X0.27Kw Pneumatic Adjustment Fine Trim Chamfer / Radius / Straight Contour Trimming Unit Profile Scraping Unit w / Quick Change Heads Pneumatic adjustment scraping unit Glue Joint Scraping Unit Buffing Unit Brandt Control System Easy Touch Automatic Edge Infeed Device Gzqh8o Multiple Roller Sensing Fine Trimming Unit

more

Listing

Nevers

(dealership location)

7,693 km

HOMAG KDF 530 C

€22,000

Call

Condition: ready for operation (used), Technical characteristics Part thickness : 8 to 50 mm Edge thickness: 0.4 to 8 mm Programmable control with group indexing Feed rate 11 m/min Composition: Edge insertion device Milling unit (straightening) Pre-melting device Edge magazine End cutting unit Milling unit (flush) Form milling unit Surface scraping unit Polishing brushes Suction nozzles : 1 x ⌀ 120 mm / 3 x ⌀ 60 mm / 1 x ⌀ 100 mm 6 bar pneumatic system Compact and complete machine Power and Motors Voltage: 400 V Pluging: Three-phased Huzongs Power: 10,5 Kw Overall dimensions Lenght: 4860 mm Width: 900 mm Height: 1610 mm Weight: 2000 Kg

more

Listing

Moneymore

6,680 km

HOMAG KAL310

Call

Condition: excellent (used), Year of construction: 2005, (Return system not included) Specification Feed Speed: 18-24m/min Panel Thickness: 12-60mm Edge Material: 0.3-3mm Joint Trimming Unit – 2 motors 3Kw Hot Melt Gluing Unit Melting Unit with Granulate Container Magazine 2 Rolls Snipping Unit chamfer / Straight Pneumatic Adjusting Device Chamfer / Straight Rough Trimming Unit Profile Trimming Unit FK11 – Feed 20m/min Universal Trimming Unit – 1 motor 4Kw Scraping Device PN10 with Quickly Changeable Cutter Heads Glue Joint Scraping Unit Pyn2j3 Application of Detergents (Sprayers) Buffing Unit Preinstallation Boomerang ZHR15 (Boomerang not included)

more

Listing

USA

0 km

HOMAG KAL 210 AMBITION 2262

Call

Condition: used, machine/vehicle number: 006283, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Fzcsxj0 Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm

more

Listing

USA

0 km

HOMAG KAL 210 EDITION 2270 JUBILEE

Call

Condition: used, machine/vehicle number: 005794, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Qdgfr Max feed speed: 25 m/min

more

Listing

Tulsa

103 km

HOMAG KAL 370 AMBITION 2492

Call

Condition: used, machine/vehicle number: 006374, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr 7vrd29nbry

more

Listing

Tulsa

103 km

Single Edgebanders with automation

HOMAG KAL 370 AMBITION 2482

Call

Condition: used, machine/vehicle number: 006375, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Ttfi9qd8 Maximum panel thickness: 60 mm Operating Units: 9 nr

more

Listing

HOMAG + LIGMATECH KAL211 EDITION 2262 & ZHR05

United Kingdom

6,838 km

HOMAG + LIGMATECH KAL211 EDITION 2262 & ZHR05

Call

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Yni90gu88 Loading and discharging system: yes

more

Listing

Italy

8,629 km

HOMAG KAR 310/8/A20/S2

Call

Condition: used, machine/vehicle number: 005774, Type of edging: Thin edge, Thick edge, Solid wood Ce7j8nqkro Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

more

Listing

Italy

8,629 km

HOMAG KL 25/6/A20/30

Call

Condition: used, machine/vehicle number: 005922, Type of edging: Thin edge, Thick edge Cy8jj2mnce Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 32 m/min Operating Units Right Side: 7 nr Operating Units Left Side: 7 nr

more

Listing

Italy

8,629 km

HOMAG KF 20/18/QA/30

Call

Condition: used, machine/vehicle number: 005954, Type of edging: Thin edge, Thick edge Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 40 m/min Operating Units Right Side: 8 nr So9bf Operating Units Left Side: 8 nr

more

Listing

Italy

8,629 km

HOMAG KF 20/20/QA/15

Call

Condition: used, machine/vehicle number: 005939, Type of edging: Thin edge, Thick edge Gluing System: PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 3000 mm Max feed speed: 40 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr Sajcx

more

Listing

Italy

8,629 km

HOMAG KAL 210/6/A20/S2

Call

Condition: used, machine/vehicle number: 006055, Type of edging: Thin edge, Thick edge, Solid wood Cfj9qxussk Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

HOMAG KAL 610/23/DE

Call

Condition: used, machine/vehicle number: 006253, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm 2jqtu2f Operating Units: 10 nr

more

Listing

Italy

8,629 km

HOMAG KAL 310/8/A3/S2

Call

Condition: used, machine/vehicle number: 002716, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Mwkku0 Grooving Unit: yes Max feed speed: 24 m/min

more

Listing

Italy

8,629 km

HOMAG KAL 610/23/DE

Call

Condition: used, machine/vehicle number: 006252, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm 0owj0s3 Operating Units: 10 nr

more

Listing

Italy

8,629 km

HOMAG KAL 310/10/A3/S2

Call

Condition: used, machine/vehicle number: 005335, Type of edging: Thin edge, Thick edge S2ue7 Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Maximum panel thickness: 60 mm Operating Units: 13 nr

more

Listing

Italy

8,629 km

HOMAG KAL 210/6/A20/S2

Call

Condition: used, machine/vehicle number: 006204, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Cqzpturl8u Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

HOMAG KAL 310/7/A20/S2

Call

Condition: used, machine/vehicle number: 004592, Type of edging: Thin edge, Thick edge, Solid wood 28vznf Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

HOMAG KFL 526/10/A3/25

Call

Condition: used, machine/vehicle number: 006387, Type of edging: Thin edge, Thick edge 93ypgjirme Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 2500 mm Max feed speed: 40 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

more

Listing

Italy

8,629 km

HOMAG KR 10/17/QA/S2

Call

Condition: used, machine/vehicle number: 005321, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Laser Premilling Unit: yes C0pjh9yc Max feed speed: 35 m/min Maximum panel thickness: 40 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

HOMAG KAL 211 EDITION 2264

Call

Condition: used, machine/vehicle number: 005437, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Bq8jqdgh Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

HOMAG KAL 210 AMBITION 2274/L LASERT

Call

Condition: used, machine/vehicle number: 005385, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Bxuaob80xq Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

more

Listing

Italy

8,629 km

HOMAG KAL 310 10/E12

Call

Condition: used, machine/vehicle number: 006139, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt K30xqzkp Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

more

Listing

Italy

8,629 km

HOMAG KAL 526/8/A3/25

Call

Condition: used, machine/vehicle number: 005655, Type of edging: Thin edge, Thick edge Ccqte2nqmq Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 2500 mm Max feed speed: 32 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

more

Listing

Italy

8,629 km

Homag BOF 311/48/K 4-Axis Machining

HOMAG KAL 310/7/A3

Call

Condition: used, machine/vehicle number: 005074, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Operating Units: 8 nr Dkmrvm3km

more

Listing

Tulsa

103 km

Panel Return Systems

HOMAG TFU 140/L/20/08/095

Call

Condition: used, machine/vehicle number: 006376, Length of conveyor: 10000 mm Panel return for edgebander: Left E2lzzuq

more

Listing

Jacksonville

1,487 km

HOMAG BOF 311/48/K

$19,900

Woodwork automated spray finishing

Call

Condition: excellent (used), Year of construction: 2003, Homag BOF 311/48/K 4-Axis Machining Center (2003) Auctioneers Note: No Pods, Tooling or Aggregate heads are included. Icjxt9u9g Main Spindle 14.5 KW HSK-63F spindle taper 12 position tool changer 208V 3 phase S/N: 0-201-03-6797

more

Listing

Chinnor Hill, Chinnor OX39, UK

7,171 km

HOMAG SPRAYTEQ S-100

€55,000

ONO plus VAT

Call

working width: 1,300 mm, Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0202714690, Homag Sprayteq S-100 Complete with 4 high pressure Durr guns and one high pressure Durr pump. 2 circuits so you can run two pumps & lines with different products to aid a quicker change over of products and less waste, if you wish. Bhodl9x3zy Low-pressure pot, installed but never used. In-feed table with air cleaner. Out feed table with optional stop/start or continual feed, meaning single person operation possible. Paper conveyor. Demonstration can be arranged up to the end of 2023, after which this may change. Very well locked after, low hours. No warranty implied or given. VAT added if UK sale. Buyer to dismantle and remove.

more

Listing

Wiefelstede

7,607 km

Jurassic map hot melt adhesive

Homag** 4-008-39-0001

€250

Call

Condition: used, Control card, hot melt adhesive, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC T3disbpe8 -Type: 4-008-39-0001 -Type: 4008390001 -Number: 1x control cards available -Price: per piece -Dimensions: 135/65/H200 mm -Weight: 0.59 kg

more

Listing

Dörpen

7,581 km

Panel saw

Homag Espana CH 04/32/32

€6,500