Used Hundegger for sale (26)

Year of construction: 2006, condition: ready for operation (used), Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details. • Condition/use: Good condition; regularly maintained; used only in own operations; no multi-shift operation • Color: RAL 5012 blue • Capacity: • Maximum log length at infeed: 13 m • Maximum log length at outfeed: 12 m • Installed working units: • Under-table swivel crosscut saw • 4-axis universal milling unit UF4 • Roller cutter • Finger cutter • Dovetail cutter • Combination support for vertical tools • Drilling unit 2.2 kW • Drilling unit 3.0 kW (reinforced) • Combination support for horizontal tools • Additional drilling unit 2.2 kW • Slotting unit Iisdpfx Anoza A Ddowec • Marking unit Additional equipment • Infeed cross conveyor, 5 horizontal strands, 2.2 m, with flat belt chain • Infeed strand with shaft extension • Extension stand with feed mechanism • 6-arm discharge table • Fully automatic pneumatic beam turning station • Finished wooden support surfaces • Label printer

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering Iedpfx Aszb I Iwjnweic - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. Iedpfezbnkfjx Anwjic We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Ijdpfx Asxftalonwsic Videos show the machine in operation.

Condition: used, Year of construction: 2004, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Iedpfx Ajyy Nnqjnwoic - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Iiodpeza Dzdofx Anwsc Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: good (used), total length: 24,000 mm, overall weight: 11,000 kg, HUNDEGGER P10 – CNC AUTOMATED TIMBER PROCESSING CENTER Iijdpoza T Sxofx Anwjc For sale: a Hundegger P10 machine designed for processing timber components. The machine is in good working order and is currently in production. Until July 15th, there is an opportunity to view the machine in operation and check all its functions before purchase. Key information: * Machine in continuous operation * Demonstration of operation possible * CNC control * Processing of roof truss elements, frame structures, and other carpentry components * High accuracy in performing joints * Design known for its durability and ease of maintenance Unlike many machines offered after disassembly, here the buyer can verify the technical condition during normal operation of the facility. The machine is available for inspection by appointment. More information, photos, and videos of the machine in operation will be provided to interested parties.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Iijdpfxsy Nx Eqj Anwoc Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen

Condition: used, Year of construction: 2011, Panel processing machine Manufacturer: Hundegger Type: SPM-2 Speed Panel Year of construction: 2011 CNC control SPM-2 for panel size 3,200 x 2,600 mm Milling unit 6 kW Maximum speed: 23,500 rpm Milling tools, maximum outer diameter: 100 mm Cutting length of milling tools, maximum: 60 mm Z-axis: positioned and moved by spindle units 5-axis milling unit 6 kW Milling spindle motor: 6 kW, frequency-controlled Maximum speed: 23,500 rpm Milling unit rotatable by 360° in the Z-axis Tilt up to 46° to the Z-axis Milling tools, maximum outer diameter: 20 mm Cutting length of milling tools, maximum: 60 mm Z-axis: moved and positioned by spindle units Ink-jet marking head Maximum character height: 50.8 mm Colored prints possible Z-axis pneumatically actuated Head can be automatically swiveled by 180° Automatic destacking system Electronically controlled lifting table Maximum lift: 1,000 mm Maximum load: 4,000 kg Iisdoy R S Inspfx Anwec Lifting table can be unloaded from the front with a forklift or from above with a crane Circular saw unit 2.2 kW Saw blade diameter: 180 mm Cutting width: 3 mm Rotational angle adjustable by servomotor: 360° Tool drive power: 2.2 kW Speed: 6,000 rpm (vc=56.5 m/s) Maximum cutting depth: 40 mm Z-axis, electrically driven via trapezoidal screw Extraction directly at the tool Processing portal: with a combined support guided on linear guides and driven by a servomotor, to which all processing units are attached. Gripping and positioning carriage with four pneumatic, individually adjustable material grippers. Gripping and positioning carriage runs on round guides. The guide is supported by coated infeed and outfeed tables. Electrically driven cross-sliding guide for moving the finished panel parts out. Availability from 11/2026 Reference no.: L2170 19526ä

Condition: used, Year of construction: 2003, Used joinery system Hundegger k2650 5 axis machine Iodpfxjwm Inio Anwjic

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting Isdpfxsyaq Dxe Anweic • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Iijdpfxjwuppwe Anwjc Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Iijdjxlla Djpfx Anwoc

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. The K3 was manufactured in 2005 and comes with the following equipment: Iijdpfsyvplnsx Anwec - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: used, Year of construction: 1994, machine/vehicle number: 1301, functionality: fully functional, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Ijdpfsw I Emksx Anweic Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information.

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts - Under-table tilting cross-cut saw, blade diameter 800mm - 4-axis universal milling unit with finger cutter and dovetail cutter Iiodeynwx Espfx Anwoc Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: - Drilling unit - Drilling unit - Slotting unit - Rear marker - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions!

Condition: excellent (used), Year of construction: 2008, Hundegger K2i 625x300mm under-table crosscut saw, 11KW saw blade 800mm, universal 5-axis milling unit, combination support for vertically operating tools, combination support for horizontally operating tools, drilling unit 2.2KW (1x vertical 18mm x 460mm and 2x horizontal 7mm/8mm x 650mm). Fully automatic hydraulic beam turning station, K2i transport and positioning device, electronic control system, 6-arm outfeed table, vertical finger joint cutter 5.5 KW, longitudinal and cross groove cutter 15.5–30mm, marking and labeling devices (bottom and rear), refined (chrome-plated) support surfaces, left and right height-adjustable safety guard plate, saw blade 900mm. The system is ready for demonstration. Availability: Autumn 2026. Iedpfx Aoww Nuxsnweic

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. Isdpexx T Rdefx Anweic We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm Iisdpfxjxtxkxs Anwjc combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Year of construction: 2002, condition: used, functionality: fully functional, Used HUNDEGGER K2-625 for sale. For sale: Hundegger K2 CNC machine with 4 axes, designed for machining wooden beams up to 13m, featuring 2 independent work clamps for sections up to 625mm x 300mm. Equipped with a circular saw unit (800mm), universal milling unit with finger bit and Milano cutter, interchangeable vertical milling unit, horizontal chain saw for groove cutting, vertical drill and hydraulic unit for beam turning. Comes with compressor unit (ELGI EN11-9.5 2022) and air dryer (MKE 155 09/2022), ready for installation and use. CE compliant. Machine is in fully operational condition. Sold with tooling and spare parts. Price upon request. Videos available upon request. Iodpfxoycg Sqe Anweic

Year of construction: 1993, condition: good (used), Hundegger planer Year of manufacture 1993 4 sides planer and chamfering machine Iisdpfxol Hw Ehe Anwjc

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device Iijdpfx Ansyfhi Nowec - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: used, Year of construction: 2010, machine/vehicle number: 9532, total height: 3,000 mm, total length: 30,000 mm, total width: 3,000 mm, Hundegger SC-3 – CNC Through-Feed Processing Center (Year 2010) Hundegger SC-3 CNC Through-Feed Processing Center For sale is a Hundegger SC-3, year of manufacture 2010, a proven and high-performance CNC through-feed processing center for modern timber construction and industrial wood processing. This machine is ideally suited for timber framing, prefabricated housing production, and high-capacity woodworking operations, offering excellent precision, reliability, and productivity. Iiodpfx Anjx Rkrfowsc Key Features: CNC-controlled through-feed processing center High level of automation and efficient material flow Accurate and reliable cutting of timber components Versatile processing options – with suitable optional units or by retrofit / upgrading, additional operations such as drilling, milling, slotting, marking, and labeling are possible Robust, durable design by Hundegger Technical Overview: Manufacturer: Hundegger Model: SC-3 Year of manufacture: 2010 Condition: used, in operational condition Location: Estonia Price: on request / according to listing The Hundegger SC-3 represents a cost-effective solution to increase throughput, precision, and process reliability in timber processing. 📩 Further technical details, documentation, and on-site inspection available upon request.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Iijdpfowhpavox Anwec

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 9286, functionality: fully functional, product height (max.): 450 mm, product height (min.): 40 mm, product width (max.): 160 mm, product width (min.): 20 mm, Drilling - Sawing - Slotting - Marking TECHNICAL DETAILS Minimum wood dimensions: 20 × 40 mm Maximum wood dimensions: 160 × 450 mm Wood length: any Positioning accuracy: ±0.5 mm Equipment and Automation Loading: automatic wood feed Unloading: automatic wood discharge Transport and clamping system: combined feed/clamping device with servo drive Feed systems: two independently operating feed systems (rollers + servo carriage) Control system: Single-Piece-Construction-Program (SPCP™) Compatibility: can be imported from CAD programs such as Robbins®, MiTek®, Alpine®, and KeyMark® Operation Required staff: just one person for loading and unloading User interface: simple and intuitive user guidance Processing Functions Milling, drilling, marking: fully automated Application: wall elements, timber framing, beams, I-joists Processing speed: extremely fast without setup time Horizontal drilling unit Iisdpfx Aswwqzajnwec Types of drilling: through and blind holes Application: e.g. rafter drilling Grooving unit Use: through and blind grooves Chain widths: various chains can be used Example application: base for posts Material handling Material transport: even stacked workpieces can be safely transported and processed Material detection and positioning: automatic via feed/clamp system and servo carriage MACHINE DETAILS Footprint: 19.10 x 5.00 m Height: 2.43 m