Used Hyundai Crawler Excavator for sale (157)

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT Hodpfxsx Thu Ns Afcji TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: excellent (used), Year of construction: 2007, operating hours: 11,000 h, functionality: fully functional, turning length: 500 mm, turning diameter: 240 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 40 mm, spindle motor power: 15 W, Working length 500 mm Max. working diameter 240 mm Spindle speeds 4.000 rpm Spindle bore 65 mm Number of tools 12 pcs Y-travel +/- 40 mm Control FANUC 18 i TB Hedpoycubtjfx Afcoi Running hours 5.000 Main motor power 15 Kw

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Hedpfx Afox I Nikjcei Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Year of construction: 2007, condition: good (used), Year of manufacture: 2007 With double turret and double spindle. Further data will follow.... Hsdeybcfdspfx Afcji

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 680 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 680 mm, spindle motor power: 18,500 W, total height: 1,950 mm, overall weight: 4,800 kg, product length (max.): 3,380 mm, number of axes: 3, This 3-axis Hyundai Wia HD2600Y horizontal turning machine was manufactured in 2025. It features a swing over the bed of Ø820 mm, a maximum turning diameter of Ø300 mm, and a turning length of 610 mm. The spindle supports up to 3,500 rpm with a motor power of 18.5 kW. It includes a 12-tool turret and a milling tool speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD2600Y horizontal turning machine. Contact us for more information. • Condition • Original packaging • 0 operating hours Capacity • Swing over bed: Ø820 mm • Swing over carriage: Ø650 mm • Max. turning diameter: Ø300 mm • Max. turning length: 610 mm • Bar capacity (sub): Ø81 mm • Chuck size (main): 10" Spindle • Spindle bore (main): Ø91 mm • Motor (max/cont.) (main): 18.5/15 kW (25/20 HP) • Motor (max/cont.) (sub): 5.5/3.7 kW (7.4/5 HP) • Torque (max/cont.) (main): 400.7/243.7 Nm (295.7/179.9 lbf·ft) • Torque (max/cont.) (sub): 46.6/25.3 Nm (34.4/17.7 lbf·ft) • Spindle type: Belt • Spindle nose (main): A2-8 • Spindle nose (sub): Ø110 mm • C-axis indexing: 0.001° Feed • Travel (Z/2B): 680 / 680 mm • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z/2B): 24 / 24 m/min • Slide type: Box guide Turret • No. of tools: 12 (24) • Tool size (OD): Ø25 mm • Tool size (ID): Ø40 mm • Indexing time: 0.2 sec • Y-axis type: Wedge type Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 5.5/3.7 kW • Torque (max/cont.): 52.6/25.6 Nm • Collet size: Ø16 mm (ER25) • Type: BMT55 Tailstock • Taper: MT#4 • Quill diameter: Ø80 mm Hsdpeycwlzefx Afcoi • Quill travel: 120 mm • Travel: 680 mm Tank capacity • Coolant tank: 200 l • Lubricating tank: 2 l Power supply • Electric power supply: 27 kVA • Thickness of power cable: Over 25 mm² • Voltage: 220/60 (200/50) CNC • Controller: HYUNDAI WIA FANUC i-Series – Smart Plus / SIEMENS 828D

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,000 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 750 mm, spindle motor power: 26,000 W, total height: 1,997 mm, overall weight: 6,400 kg, controller manufacturer: FANUC, controller model: i Series – Smart Plus, product length (max.): 3,506 mm, number of axes: 2, This Hyundai Wia L300C was manufactured in 2025. It features a swing over the bed of Ø750 mm, a maximum turning diameter of Ø500 mm, and a turning length of 720 mm. The spindle supports a bar capacity of Ø90 mm and operates at speeds up to 3000 rpm. Ideal for precision turning with its robust 12-tool turret and rapid traverse rates. Consider the opportunity to buy this Hyundai Wia L300C horizontal turning machine. Contact us for more information. • Condition: Original packaging, 0 operating hours • Capacity: • Swing over bed: Ø750 mm • Swing over carriage: Ø480 mm • Max. turning diameter: Ø500 mm • Max. turning length: 720 mm Hsdpfxoycwlne Afcsi • Bar capacity (main): Ø90 mm • Bar capacity (sub): Ø102 mm • Chuck size (main): 12" • Chuck size (sub): – • Spindle (main): • Spindle bore: Ø102 mm • Torque (max/cont.): 1,131/957 Nm (834.2/705.8 lbf·ft) • Spindle type: Belt + 2-step gear • Spindle nose: A2-8 (A2-11) • Feed: • Travel (X/Z): 355/750 mm • Rapid traverse rate (X/Z): 20/24 m/min • Slide type: Box guide • Turret: • Number of tools: 12 • Tool size (OD): Ø25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.3 sec • Tank capacity: • Coolant tank: 220 l • Lubricating tank: 1.8 l • Power supply: • Electric power supply: 30 kVA • Thickness of power cable: Over 35 mm² • Voltage: 220/60 (200/50)

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, total height: 1,700 mm, overall weight: 3,550 kg, controller manufacturer: FANUC, controller model: i – SMART PLUS, product length (max.): 2,970 mm, number of axes: 3, This Hyundai WIA SE 2200 LM was manufactured in 2025. It features a maximum turning diameter of Ø300 mm and a length of 529 mm, with a spindle speed of up to 6,000 rpm. The machine includes a 12-tool turret and supports milling with a tool speed also up to 6,000 rpm. Ideal for precision turning and milling tasks. Contact us for more information about this machine. • Condition: Original packaging, 0 operating hours • Capacity • Max. swing: Ø600 mm • Swing over the carriage: Ø390 mm • Max. turning diameter: Ø300 mm • Max. turning length: 529 mm • Bar capacity (main): Ø32 mm • Chuck size (main): 5 • Spindle (Main) • Spindle bore: Ø42 mm • Motor (max/cont.): 7.5/3.7 kW (10/5 HP) • Torque (max/cont.): 63.6/23.6 Nm (46.9/17.4 lbf·ft) • Spindle nose: A2-5 • Spindle type: Flat type • C-axis indexing: 0.001° • Feed • Rapid traverse rate (X/Z): 15 m/min • Slide type: Roller LM guide • Turret • Number of tools: 12 (24) • Tool size (OD/ID): Ø20/Ø32 mm • Indexing time: 0.15 sec • Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 3.9/2.6 kW (5/3.5 HP) • Torque (max/cont.): 36.7/18.5 Nm (27.1/13.6 lbf·ft) • Collet size: ER20 (Ø13 (0.5")) • Type: BMT45 Hsdpeycv Egefx Afcsi • Tailstock • Taper: MT#4 • Quill diameter: Ø55 mm • Travel: 580 mm • Tank capacity • Coolant tank: 200 l • Lubricating tank: 0.7 l • Power supply • Electric power: 23 kVA • Power cable thickness: Over 16 mm² • Voltage/frequency: 220 V, 50/60 Hz

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 100 mm, total height: 2,080 mm, overall weight: 8,500 kg, product length (max.): 3,650 mm, number of axes: 4, This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025, featuring a maximum turning diameter of Ø230 mm and length of 673 mm. It boasts a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, dual 12-tool turrets, and rapid traverse rates ensuring efficient operations. Ideal for complex turning tasks. Contact us for more information about this machine. • Packaging: Original packaging • Capacity: • Swing over carriage: Ø290 mm • Max. turning diameter: Ø230 mm • Max. turning length: 673 mm • Bar capacity (1st/2nd): Ø65 mm • Chuck size (1st/2nd): Ø210 mm • Spindle: • Spindle bore (1st/2nd): Ø76 mm • Motor (Max/Cont.) (1st/2nd): 22/11 kW (30/15 HP) • Torque (Max/Cont.) (1st/2nd): 358/214 Nm (264/158 lbf ft) • Spindle type: Built-in motor • Spindle nose: A2-6 • C-axis indexing (1st/2nd): 0.001° • Feed / Axes: • Travels (X1/X2): 165/195 mm • Travels (Z1/Z2): 700/720 mm • Travel (ZB): 668 mm • Rapid (X1/X2): 20/20 m/min (787/787 ipm) • Rapid (Z1/Z2): 40/40 m/min (1,575/1,575 ipm) • Rapid (Y): 7.5 m/min (295 ipm) • Rapid (ZB): 40 m/min (1,575 ipm) • Slide type (X/Y): Box guide • Slide type (Z): LM guide • Turret: • No. of tools: 2 × 12 (24) • Tool size (OD): Ø20 mm • Tool size (ID): Ø32 mm • Indexing time: 0.15 sec • Y-axis type: Wedge type • Live tool: • Milling tool speed: 5,000 rpm • Motor (Max/Cont.): 5.5/1.1 kW (7.4/1.5 HP) • Torque (Max/Cont.): 47/14 Nm (34/10 lbf ft) • Collet size: ER25 • Type: BMT55 • Tank capacity: • Coolant tank: 300 L (79.3 gal) • Lubricating tank: 4 L (1.06 gal) • Power supply: Hsdpfjycvzbex Afcji • Electric power: 60 kVA • Power cable thickness: Over 50 mm² • Voltage: 220/60 (200/50) • NC / Controller: FANUC 31i-B Plus / SIEMENS 840D

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, total height: 1,755 mm, overall weight: 5,800 kg, controller manufacturer: FANUC, controller model: Series, product length (max.): 3,400 mm, number of axes: 2, This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information. • Original packaging Capacity • Swing over the bed: 630 mm • Swing over the carriage: 460 mm • Max. turning diameter: 460 mm Hedpjycvwcjfx Afcsi • Max. turning length: 659 mm • Bar capacity: 80 mm • Chuck size: 10" Spindle • Spindle bore: Ø91 mm • Motor (max/cont.): 26/18.5 kW (35/25 HP) • Torque (max/cont.): 734/522 Nm (541/385 lbf·ft) • Torque (additional value stated): (828/748 Nm) • Spindle type: Belt • Spindle nose: A2-8 • C-axis indexing: 0.001° Feed • Rapid traverse rate (X/Z): 24 / 30 m/min (945 / 1,181 ipm) • Slide type: Box guide Turret / Tooling • No. of tools: 10 (12) • Tool size (OD): 25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.15 sec Tailstock • Type: MT#5 (Built-in tail stock - MT#4) • Quill diameter: Ø100 mm • Quill travel: 120 mm • Travel: 680 mm Tank Capacity • Coolant tank: 180 L (47.6 gal) • Lubricating tank: 18 L (4.75 gal) Power Supply • Electric power supply: 27 kVA • Thickness of power cable: Over 16 mm² • Voltage: 220/60 (200/50)

Condition: used, Year of construction: 2015, fuel type: diesel, weight max. in kg 2980 kg stroke 3300 mm load center 500 mm Number of working hours ca. 4.475 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Full cabin Hjdpfx Afoya Ih Uocsi - Hydraulic side shift Accessories, tools, and clamping devices shown are only included if noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm Hodpjp T Ulzofx Afcji MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: new, functionality: fully functional, shovel volume: 2.8 m³, machine/vehicle number: 62WC-90011, - Wheel loader bucket - Volvo system attachment Hodpevr Tnajfx Afcoi - Weight 1235 kg - Volume 2.8 m³ - Cutting edge width: 2.80 m

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! Hedpfxsv A Enyo Afcei If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Hsdpfjyaln Esx Afcji Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm • Tool magazine: 12 positions • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) - Automatic tool exchange unit (ATC) Hodpfeulk D Isx Afcoi Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) - Hydraulic unit - Axis Slide Cover - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 42,000 m/min, rapid traverse Y-axis: 42,000 m/min, rapid traverse Z-axis: 42,000 m/min, controller manufacturer: FANUC, controller model: i-Series, BRAND: HYUNDAI-WIA MODEL: F-600D CATEGORY: VERTICAL MACHINING CENTERS (ROTARY PALLET SYSTEM) YEAR OF MANUFACTURE: 2018 CNC CONTROL: FANUC i-SERIES MACHINE WEIGHT: 10,000 kg MACHINE DIMENSIONS: Length: 3,904 mm, Width: 3,970 mm, Height: 3,080 mm Spindle Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (continuous/30 min): 15/18.5 kW Working Capacities X axis: 800 mm Y axis: 600 mm Z axis: 600 mm Distance spindle - table surface: 200 - 800 mm Distance between column and spindle center: 690 mm Table Table dimensions: 2 x (900 x 650 mm) Number of tables: 2 Table load capacity: 2 x 500 kg Table change time: 8.5 sec Feedrates Rapid feedrate (X/Y axes): 42,000 mm/min Rapid feedrate (Z axis): 42,000 mm/min Tool Changer Hjdpfx Afsxxl Egscoi Tool taper: BT-40 Tool magazine capacity: 30 stations Max tool diameter (adjacent/non-adjacent): Ø 90 / Ø 150 mm Max tool length: 300 mm Max tool weight: 8 kg Accessories Chip conveyor Coolant collecting tank with pumps High-pressure coolant pump through spindle line Spindle line air conditioner Manuals, electrical schematics, and CE Declaration This model stands out among those you have provided as a Vertical Machining Center equipped with a Rotopallet system (two independent tables) and a very high rapid traverse rate of 42,000 mm/min.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 310 h, load capacity: 18,000 kg, lifting height: 4,500 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Hyundai, gearing type: automatic, fork length: 2,450 mm, turning radius (outer): 4,350 mm, tire condition: 99 %, front tire type: pneumatic tires (air-filled), front tire size: 10.00-20-16PR, rear tire type: pneumatic tires (air-filled), rear tire size: 10.00-20-16PR, color: yellow, Equipment: CE marking, adjustable boom, air conditioning, cabin, centralized greasing system, clamp, front guard, gripper hydraulics, head guard, lighting, seat heater, sideshift, trailer coupling, Forklift truck practically brand new – in perfect condition. I am the first owner, the forklift is under warranty and has valid UDT certification. Hjdeyay Ndspfx Afcji

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Year of production: 2007 Maximum load: 200kg Heder Iy Nkepfx Afcji

Condition: excellent (used), Year of construction: 2007, Industrial robot Brand: Hyundai / Hanwha TechM Year of production: Hsdpor Iyymofx Afcsi 2007 Maximum load: 200kg

Condition: excellent (used), Year of construction: 2015, Year of production: 2015 Hedstu Tp Sepfx Afcsi Range: 2239 mm Control: Panasonic WG III Lifting capacity: 80 kg

Condition: defective spare-parts repository (used), Year of construction: 2001, functionality: not functional, overall weight: 2,300 kg, We offer this defective Hyundai SPT-V30T vertical machining center, year of construction 2001. Fault 310: SERVO OFF Without this fault everything works. Model: SPT-V30T Serial number: 70TY5064 Weight: 2300 kg Weight: 5071.5 lbs Pick up in Kaunas, Lithuania If you have any questions or need more information, feel free to send us a message or give us a call. Hedsyay Hpjpfx Afcei

Condition: used, Year of construction: 2014, functionality: fully functional, Brand: HYUNDAI-WIA Model: LM-1800 / ITSY Category: CNC Turning Center Year of manufacture: 2014 CNC Control: FANUC Series 31i – Model A Machine weight: 8,500 kg Machine Dimensions Length: 4,600 mm Width: 2,100 mm Height: 2,090 mm Working Capacity Max swing diameter over upper/lower carriage: No.1: Ø 290 mm / No.2: Ø 290 mm Max turning diameter (spindle / sub-spindle): No.1: Ø 230 mm / No.2: Ø 230 mm Max turning length: 673 mm Bar capacity (spindle / sub-spindle): Ø 76 mm Axis Travels Hodpfxjyarguj Afcei X1 / X2 axis: No.1: 165 mm / No.2: 195 mm Y axis (upper turret): 100 mm (± 50 mm) Z1 / Z2 axis: No.1: 700 mm / No.2: 720 mm ZB axis: 668 mm C axis (spindle and sub-spindle): 360° Min. programmable angle: 0.001° Main Spindle and Sub-Spindle Spindle speed: 50 – 5,000 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 210 mm Spindle motor power (max/cont.): 22 / 11 kW Turrets Configuration: Turret 1 + Turret 2 BMT-55 Stations per turret: 12 (live tool capable) Total stations: 24 Live tool speed: 5,000 rpm Live tool power: 5.5 kW Tool dimensions: Turning: 20 x 20 mm / Boring: Ø 32 mm Rapid Traverses X1 / X2 axes: 20,000 mm/min Y axis: 7,500 mm/min Z1 / Z2 / ZB axes: 40,000 mm/min Accessories TOP AUTOMAZIONI bar feeder – Fusion model Coolant collection tank with wash pumps Chip conveyor Fixed and driven toolholders Automatic tool presetting arm with M code Manuals, electrical diagrams, and CE Declaration Overhauls Carried Out Complete overhaul of turrets 1 and 2 with replacement of seals and bearings Overhaul of X2 and Z2 axis ballscrews with bearing replacement Complete overhaul of the axis lubrication circuit and replacement of pneumatic hoses Overhaul of piece ejector pistons (Z2 unload hand) with gantry replacement Complete interior repainting Replacement of operator side glass Complete overhaul of telescopic covers on all linear axes

Condition: used, Year of construction: 2022, operating hours: 1,934 h, 2022 | Hyundai HL975A CVT | Used Wheel Loader | 1934 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hsdpfsx Tczqsx Afcsi 💰 Buy Now for EUR 189500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 49 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Well-functioning machine and good-looking machine, a bit of play on the quick coupler and articulation pin, tires need to be replaced as they are on the bad side, here and there some spots of damage. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39199 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, turning length: 3,250 mm, turning diameter: 920 mm, spindle bore: 165 mm, HYUNDAI WIA KL 7000 LY Made in 2025. CE - NO CONTROL PANEL – FANUCK 32I- MODEL B PLUS The machine has a high pressure coolant of 70 BAR automatic SMW Germany made. Hsdpfx Afoyighcecsi Chuck diameter: 610 mm Max. Machining diameter: 920 mm Max. Machining length: 3250 mm Diameter above the bed: 1200 mm Max Bar diameter: 165 mm X/y/z / fast feed speed: 12/10/12 / m/min Number of places for tools: 12 Power of the driving tool: 11/7. 5 kw +Located In Israel . +Atractive price

Condition: used, Year of construction: 2012, operating hours: 12,943 h, Type of fuel: LPG Empty weight: 3.960 kg Dimensions (LxBxH): 27 x 12 x 21 cm Lifting capacity: 2.500 kg Hjdpextqdkefx Afcsi Lift height: 460 cm Clearance lift height: 145 cm Fork length: 1.200 mm - Year: 2012 - Documentation available: Yes - CE certificate present: No - Serial number: Hyundai 25L-7A - Operating hours: 12943 - Lifting capacity: 2500kg - Lifting height: 4600mm - Overhead clearance: 2100mm - Free lift: 1450mm - Fork length: 1200mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights - Mast: Triplex - Drive: LPG - Motor brand: Hyandai - Transport dimensions: 270mm x 120mm x 210mm (l x w x h) - Transport weight [kg]: 3960kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom