Used Kallfass Universa 500 for sale (45)

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, Fully automatic film packaging machine for 4-sided product sealing with 2 rolls of flat film. Output up to approximately 85 cycles/minute. The machine operates without a forming shoulder and processes flat film, creating a tight, 4-sided sealed film bag around the product. Double-sided film transport creates symmetrical film bags into which the products are sealed. This makes even thick and extremely blunt films easy to process. Suitable for all common flat films from approximately 12–80 μm, e.g., polyethylene (LDPE), polyolefin film (PO), and polypropylene film (PP). Wearing parts and defective parts have been replaced. Pslhcdwjwfgp Ae Dogk The machine has been technically tested at Kallfass and is fully functional. Technical Specifications Cross-sealing die: 550 mm Film: Semi-tubular film, approx. 12 - 80 µm Film roll width: max. 600 mm Min. product length: 80 mm Passage height: 150 mm Working height: 780 - 930 mm Power connection: 400 volts, three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-belt Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical Specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Automatic length compensation to reduce the die gap - Film support plate available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650 SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Pslhoh N Dwfecdw Degk Product timing is controlled by a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this machine or systems from other manufacturers. We reserve the right to sell the product at any time. Price is EXW. No guarantee is given for technical data.

Condition: used, Year of construction: 2000, Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 NYear 2000 - Serial-No. S 04.00.9 Pgoljr H N U Hohcdw Dok Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Pgolsq Htfnshcdw Dsk Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: like new (used), Year of construction: 2007, Kallfass Universa 400 Year of manufacture 2007 Fully automatic side-sealing machine for packaging products - regardless of their length - with full wrapping and without film overlap. The product is fed in via a conveyor belt with simultaneous wrapping in a half-tube film via a forming shoulder. After wrapping the product with film (LD-PE or PO), the transverse sealing is carried out with a permanently heated sealing system. The longitudinal seal is produced by a continuous side sealing device. Length of transverse welding stamp: 450 mm Welding stamp passage height: 200 mm Max. Film roll width: 600 mm Power supply: 400 Volt Technical data Max. Speed 60 cycles per minute (depending on product) Min. product length 80 mm Min. product width 20 mm Working height 850 - 915 mm Standard distance at the height of the sealing bar 200 mm Condition: very good! Availability: immediately Pgelhceq Svfiedw Djk

Condition: used, Year of construction: 1998, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. Pgjlhcdwsu Sruvo Dsk offer consists of: Kallfass UNIVERSA 5050 - Angle welder Universa 5050 - Shrink tunnel Compact 650 S - Roll delivery We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap Pgelhcdwevg Amze Dsk full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Technical data Cross sealing stamp: 450 mm Film: semi-tubular film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel aperture width: 450 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-strip Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Film support plate optional - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650SO shrink tunnel Polhcjiqtuwsdw Dsgk - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, Western Europe, parts of Eastern Europe, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is achieved via a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this or systems from other manufacturers. Subject to prior sale. Prices are EXW. No guarantee is given for technical data.

Condition: good (used), Year of construction: 2010, width 40 cm age 2010 altitude up to approx. 20 cm film wrapping machine side sealer computer control with touch screen fully automatic Polhcdwju A Rmxs Degk infeed belt shrink tunnel ager shrink tunnel age 2019 Delivery time: immediately

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. Pgslhcdsufy Iujw Dok The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Technical data Cross sealing stamp: 450 mm Film: semi-tubular film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 600 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 200 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel opening width: 650 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: refurbished (used), Year of construction: 2006, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Technical data Cross sealing stamp: 750 mm Film: semi-tubular film, approx. 12 - 80µm Pgslhsufh Amjcdw Dsk Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 300 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel opening width: 650 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: VD 01.06.012, total length: 4,500 mm, total height: 1,570 mm, total width: 2,400 mm, temperature: 240 °C, Equipment: documentation/manual, KALLFASS Universal 1600 NT shrink tunnel for sale in good, working condition. Manufacturer: KALLFASS GmbH Type: Universal 1600 NT Pgolhcdewcw Ttow Dsk Year of manufacture: 2006 Maximum tunnel passage height: 500 mm Maximum tunnel passage width: 1600 mm Length of heated tunnel hood: 2500 mm Maximum temperature (infinitely adjustable) [°C]: 240 Extended tunnel outlet: 1000 mm Adjustable working height: 830 - 900 mm Product transport: Rod chain conveyor, silicone-coated rods Installed heating capacity (consumption in continuous operation approx. 40%): 60 kVA Rated power / rated current at 400 V: 68 kVA / 98 A (in stand-alone operation) Machine dimensions in mm (length x width x height) Approx.: 4500 x 2400 x 1570 Further information available upon request. Viewings and demonstrations are available at our premises by appointment.

Condition: good (used), Kallfass cutting system with 5 sawing units. Used. Good condition. Pjlhcdsvlixusw Dsgk

Condition: refurbished (used), Year of construction: 2012, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 1300 de Luxe In-Line Year of construction: 2012 Technical Data: Pslhcdwjrvx Ewe Djgk Film: Flat film, up to approx. 120 µm Film roll width: max. top 1350 mm, bottom 1300 mm Passage height: 100-500 mm Touch panel: Siemens TP177 Control system: Siemens S7 This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor. Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 1300 NT Year of construction: 2012 Technical Data: Tunnel passage width: 1150 mm Tunnel passage height: 600 mm Tunnel outlet, extended: 500 mm Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrink results, even with difficult product contours. shrink results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: used, Year of construction: 2004, A film sealing machine is for sale. Type: KW 8060 Universal Year of manufacture: 2004 Pjlhcov Hx Nxsdw Djgk Machine number: RZ 05.04.105

Condition: used, Year of construction: 2005, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 UniversalYear 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Pgolhcdsqxwk Tow Dsk On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2001, Functionality: fully functional, The KC 5040/450 compact L-sealer combined with high-quality shrink tunnel. The qualities of this series of machine become evident in intensive, continuous use. Products such as, for example, printed matter, glassware sets or oil cans can all be packed quickly and economically while maintaining high quality. Proven impulse sealing technology using a Teflonized sealing and cutting wire ensures effective and absolutely odorless operation. The KC 5040/450 is equipped with electromagnetically operated hooks to apply constant pressure during the sealing cycle. This guarantees accurate maintenance of the set sealing time and trouble-free sealing and cutting, even with thicker films. The electromechanical drive of the sealing frame is switchable to a variable duty cycle. The electromechanical actuator is automatically closed and opened thanks to the fixed time interval. This means an automated working method up to the level of up to 20 cycles/min. Pgeljvb E Hgehcdw Dsk

Year of construction: 2005, Condition: good (used), As the machine has plenty of special equipment and technical features (e.g. electromechanical sealing frame closure, motor-driven film holder, goods conveyor belt with adjustable speed, and much more), it is particularly suitable for flexible service provider operations. It is technically completely overhauled and cleaned. If you are interested, we would be pleased to arrange a viewing appointment with packing samples. Pgslhcdwsmcw T Ej Dsk The price is ex works, unpacked and plus VAT.

Condition: refurbished (used), Year of construction: 2004, Functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinker KC 5040/450 Universal Year of manufacture: 2004 Technical data: Welding frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase current Easy-to-use angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 500 x 400 mm. Proven impulse welding technology with Teflon-coated cutting welding wire for absolutely odor-free operation. Equipped with a closing mechanism as Pgelhcevuqxujdw Dek automatic contact pressure for precise adherence to the set welding time and for problem-free cutting welding even of thick films. Viewings and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 950 de Luxe In-Line Year of construction: 2006 Dimensions: approx. 2500 x 1650 x 2100 mm (LxWxH) Weight: approx. net 800 kg / gross 880 kg Technical Data: Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 920 mm, bottom 920 mm Working height: 815 - 915 mm Passage height: 500 mm Power connection: 400 V three-phase current Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 25 L/cycle Touch panel: Siemens TP177 Control system: Siemens S7 This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor Pelhcdwsvfd Rfj Dogk Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 950 HV Year of construction: 2006 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical Data: Technical data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of the heated tunnel hood: 1700 mm Length of the additional insulating hood: 2200 mm Tunnel outlet, extended: approx. 600 mm Working height: 800 - 900 mm Power connection: 400 V three-phase current Rated power: 39 KW Rated current at 400 V: 56 A for single operation Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrinking results even with shrinking results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: refurbished (used), Year of construction: 2014, Functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinker KC 8060/650 Universal Year of construction: 2014 Dimensions: approx. 3550 x 1350 x 1450 mm (LxWxH) Weight: approx. net 690 kg / gross 790 kg Technical data: Sealing frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase current Easy-to-operate angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with Teflonized cut-off welding wire for absolutely odorless operation. Equipped with locking mechanism as automatic pressure mechanism for precise adherence to the set welding time and for easy for problem-free cut-off welding even of thick films. Pgslou Nuztshcdw Dek Viewings and demonstrations are possible on our premises by prior arrangement. Function guarantee, no warranty

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, Compact and economical shrink tunnel featuring the patented ring-nozzle heating system with particularly effective air flow regulation. Equipped with continuously adjustable transport speed. The use of transport rods in conjunction with the patented ring-nozzle heating system prevents any marks on the underside of the package, especially when using polyolefin film. Technical specifications: Polhcdwewfgn Es Dsgk Tunnel passage width: 450 mm Tunnel passage height: 200 mm Length of heated tunnel hood: 1100 mm Length of additional insulating hood: 1400 mm Adjustable working height: 800 - 900 mm Power supply: 400 V three-phase, 50 Hz with protective conductor Rated power: 14.5 kVA Rated current at 400 V: 21.0 A Viewings and demonstrations are available at our premises by appointment. Functional guarantee, no warranty

Condition: reconditioned (used), Functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone re price negotiations Pelhcdjwcnqcjw Dogk

Condition: used, Functionality: fully functional, Year of construction: 2020, Separation conveyor 2 pieces identical Pslhcdjvtm Dqjw Degk

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Pgjlhcdwstrtztj Dok Length 2995 mm Width 1250 mm Height 1550 mm