Used Gildemeister Nef Plus 500 for sale (244)

Condition: used, Year of construction: 1999, greates pass round over bed 500 mm swing diameter over bed slide 285 mm turning length 1500 mm control HEIDENHAIN control MANUAL PLUS centre height 250 mm centre distance 1500 mm spindle bore 70 mm Lhjlhcdsvh I U How Djd spindle turning speed range 8 - 2800 U/min spindle head DIN 55027 Gr. 8 spindle drive 11 kW max. torque on the spindle 1050 Nm feed power X/Z axis 5000 / 10.000 N rapid traverse X-axis 6 m/min rapid traverse Z-axis 8 m/min tailstock quill diameter 80 mm tailstock quill stroke 180 mm tailstock taper MT 5 total power requirement kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 3,30 x 1,92 x 1,93 m Accessories: 3-jaw chuck FORKARDT 250 mmø, 3-jaw chuck FORKARDT 315 mmø, face plate 500 mmø, combined changing tool post SANDVIK- COROMANT for inserts MULTIFIX C and CAPTO C 5, various inserts MUTLIFIX C and CAPTO C 5, 2 solid steadies, running center, coolant

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,000 h, Gildemeister NEF plus 500 with Heidenhain control in good condition. Ljlhcov Daq Sedw Dehd The screen has been replaced with a more modern one, but the original still works. Incl. Multifix Can be viewed by arrangement.

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Lhjlhcoub Amljdw Ded Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: ready for operation (used), Year of construction: 1998, Turning diameter 500mm, turning length 1,500mm, manual plus control, Lhslhceuv Ekledw Dsd

Condition: ready for operation (used), Year of construction: 1996, operating hours: 42,461 h, Functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (min.): 2,800 rpm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Control: Heidenhain Grundig Manual Plus Turning length: max. 1,000 mm Rotation diameter: max. 500 mm Turning diameter over bed: 500 mm Turning diameter over slide: max. 290 mm X-axis: 260 mm Spindle data Spindle bore: 70 mm Spindle speed: max. 2,800 rpm Spindle motor power: 11 kW MACHINE DETAILS Length: 2,500 mm Lhsljulwqhohcdw Ded Width: 1,750 mm Height: 1,850 mm Weight: 2.65 tons

Condition: repair required (used), Year of construction: 1996, Functionality: not functional, spindle bore: 71 mm, are selling the machine as it has rarely or never been used for some time. Mechanically in very good condition, has only 20500 operating hours, spindle hours probably only 2000. Wipers were changed a few hours ago Turning length 1000mm Turning diameter 500mm 3_Jaw chuck in top condition Complete documentation Unfortunately, the control unit no longer starts up as it has not been switched on for over 6 months. The backup battery has probably given up. Joystick is damaged. The rapid traverse button is missing Lslhcovcm Axsdw Djhd It would therefore make sense to sell it to someone who is familiar with these machines

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, Control: Cycle control with 14" color screen Grundig Manual Plus TECHNICAL DATA circulation diameter - over bed 500 mm - over cross slide 290 mm Face travel 260 mm Center distance 1500 mm Drive power (100% ED) 11 kW Speed range 8 - 2800 rpm Lelhcdstqdpwjw Dshd Spindle bore 70 mm Tailstock -Quill diameter 80 mm -Quill stroke 180 mm -Quill holder MK 5 Tool holder Multifix quick-change holder size C EQUIPMENT/ACCESSORIES  Manual turning with handwheels  Turning with work cycles  Automatic turning  Tailstock with various centers  Multifix quick-change holder size 6 incl. various cassettes (approx. 8 pieces)  Three-jaw chuck ø 315 incl. clamping jaws  Four-jaw chuck ø 250 incl. clamping jaws  Closed steady rest  Open steady rest  Splash and chip protection thanks to sliding doors  Protective cover for chuck  Coolant device  Chip tray  Work area lighting  Set-up elements  Documentation

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min Lhjlhcevxwlvedw Dsd tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: good (used), Year of construction: 2004, operating hours: 29,701 h, Functionality: fully functional, For sale is a cycle lathe of the brand Gildemeister and type NEF 520 The machine is fully operational and in good condition More pictures and video available on request Technical data Year of construction: 2004 Operating hours: 29,701 h Rotation diameter over bed: 500 mm Rotation diameter over cross slide: 290 mm Face travel: 260 mm Center distance: 1,000 mm Control: Manual Plus Heidenhain Speed range - main spindle 8: 3,000 min/-1 Drive power - main spindle: 12 kW Max. Torque: 920 Nm Gear stages: 2 Lsljrz Rz Rehcdw Dshd Gear stage 1 8: 750 min/-1 Gear stage 2 32: 3,000 min/-1 Spindle head: 8 / DIN 55027 Spindle bore: 70 mm Spindle diameter in front bearing: 120 mm Spindle nose: ME 80 Chuck diameter: 250 mm Tool holder: Multi-Fix C Quill diameter: 80 mm Quill stroke: 180 mm Quill holder: MK 5 Rapid traverse X: 8 m/min Rapid traverse Z: 10 m/min VC X: max. 5,000 mm/min VC Z: max. 5,000 mm/min Total power requirement: 24 kVA Machine weight approx.: 2.7 t Space requirement: approx. 4.5 x 2.8 x 1.8 m On request, transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1997, Hello. I have for sale CNC cyclic lathe GILDEMEISTER NEF 500 prod. year 1997. The machine is very accurate, ideal for turning single pieces as well as short series, you can work on it in conventional mode as well as programming. Programming is very easy consisting of filling in very simple and clear cycles, it is especially recommended to lathe beginners in the subject of CNC. The machine is connected with the possibility of testing and training in the operation and programming of the machine To the machine adds DTR Documentation If you want to speed up the execution of individual parts, this machine is ideal for such tasks TECHNICAL AND VISUAL CONDITION: Very Good Country of manufacture: Germany Machine parameters: - Control: Heidenhain Manual Plus - Quick-change knife vise - 3-jaw chuck fi 250mm Forkard - max. revolutions 2800rpm - three-stage gearbox - max. turning diameter X axis = 500mm - max. length of turning Z axis = 1000mm - cooling system - tailstock - central lubrication of the slide - chip tray - spindle opening Fi-71mm - DTR - machine weight: 3800 kg I issue VAT invoices 23% price includes loading Lhslor Rn Nuohcdw Djd The machine after a full overhaul. Working 100%. Connected and ready to work. WE ALSO HANDLE ALL PROCEDURES RELATED TO LEASING!!! Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Year of construction: 2006, Condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Lolovnd Tlshcdw Djhd

Condition: ready for operation (used), controller model: Heidenhain Plus IT, swing diameter over cross slide: 675 mm, VDI tools (VDI 40 - DIN 69880-40 / DIN 5480) C-axis Shunk claw Chip conveyor belt Coolant pump 12 bar - 23 l/min Ljlhcev Rwlmsdw Dohd Swing over bed: 700 mm Swing over cross-slide: 380 mm Max longitudinal travel Z-axis: 550 mm Max cross travel X-axis: 300 mm Dia of spindle bore: 87 mm Power on the spindle: 25/34 kW Number of speeds: 5000 rpm Toolchanger: yes Number of tools: 12 driven VDI toolpositions

Condition: good (used), Year of construction: 2000, turning length: 750 mm, turning diameter: 320 mm, total height: 1,500 mm, overall weight: 2,000 kg, controller manufacturer: HEIDENHAIN, machining diameter: 320 mm, space requirement length: 2,600 mm, space requirement width: 1,500 mm, CONTROLS .. CNC Teach In Controls HEIDENHAIN BASIC FUNCTIONS .. design principle: flatbed .. number of x/z slides: 1 WORKING RANGE TURNING .. swing diameter (max): 320 mm .. turning diameter (max): 150 mm .. worpiece length max.: 750 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2600 mm .. space requirements -front/back-: 1500 mm .. total height: 1500 mm .. total weight approx.: 2000 kg Machine in very good condition. Was rarely used Delivery without equipment - without 3 jaw chuck - without toolholder Lolhcsv Stcdodw Dshd

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 700 mm, Gildemeister NEF 400 Built in 2008 Very good condition Siemens 840D Lholhcdov I Ri Hjw Djd Can be viewed under load See PDF for details -----available October 2025-----

Condition: used, Year of construction: 1989, turning diameter 1020 mm turning length 2000 mm turning diameter over bed slide 600 mm control EPL 2 cross movement 600 mm spindle head Din 55027 Gr. 11 spindle diameter in front bearing 170 mm spindle bore 128 mm spindle turning speed - 4 steps 5 - 1120 U/min. rapid traverse X - + Z - axis 6 + 8 m/min. power feed longitudinal 1900 daN tailstock quill taper MT 6 quill stroke 300 mm Lelhjv Hti Hecdw Djhd diameter of quill 125 mm workpiece support - quadratic Aufnahme VDI 3425/3 mm total power requirement 30 kW weight of the machine ca. 10,2 t dimensions of the machine ca. 7 x 2,5 x 2,18 m Heavy CNC lathe Gildemeister, Mod. NEF 1020 with ELTROPILOT L-2 control with square tool turret with prism system for at least 4 steels and chip conveyor. Machine bed made of Meehanite cast iron and hardened guideways. All accessories such as jaws, tool holders, boring bars, steels, drill chucks, punches, etc. are included with the machine. Machine dealer with own stock of 1600 m².

Condition: used, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 225 mm turning length: 600 mm x-axis: plan: 260 mm longitudinal traverse (z-axis): 640 mm control: Bahnsteuerung 2-Achsen revolution per minute: 20 - 4000 U/min spindle bore: 72 mm external spindle dia. in forward position: 100 mm Torque: 150 rapid power traverse in X-and Z direction: 10 / 10 m/min feed speed: X/Z: 5 / 5 m/min. tool turret - number of stations: 12 Stationen / Stations tailstock taper ISO: MK 4 tailstock quill stroke: 100 mm electrics - voltage/frequency: 380 V / 50 Hz V/Hz interface: ja total power requirement: 22 kW Weight approx.: 3,5 t dimension machine xH: ca. 3,1 x 1,8 x 1,7 (ohne Späneförderer) m Die Maschine befindet sich derzeit in der technischen Abteilung. Anwendung: Diese Verticaldrehmaschine ist eignet zur 2-achsigen Bearbeitung (Drehen, Bohren; Fräsen, Y-Achse) von Futterteilen. Hochdruck-Kühlmitteleinrichtung Späneförderer Bürener mit Ölnebelabscheider IFM (elektrostatische Absaugung) Werkstückbe-und Entladeeinrichtung Ljlhovbba Nocdw Dshd *

Condition: good (used), Year of construction: 2001, Manufacturer: Gildemeister Model: NEF 320 Lhelhcdwoupi D Uj Dod Year of manufacture: 2001 Control: Siemens 810 D - Manual Turn Chuck diameter : 200 mm Turning diameter : 150 mm _____ Description of the machine: Rotation diameter: 320 mm turning diameter: 150 mm Center distance: 750 mm Spindle speed: 4,000 rpm Torque: 410 Nm Tool holder: Parat holder Chuck: Quick-action chuck Tailstock: Manual Coolant pump: 2.3 bar

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm >> Weight of the machine approx.: 2.0 t Accessories and equipment: Lolhjv Aix Ajcdw Dohd >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition.

Condition: ready for operation (used), Rotation diameter over bed/face slide: 710mm/410mm, turning length: 2000mm, center height: 350mm, spindle bore: 92mm, speed: 1800rpm, quill diameter: 210mm, rapid traverse X/Z: 8m/min/10m/min, feed: 5m/min, feed force: 2000daN. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5600kg. Documentation available. On-site inspection is possible. Lhjlhcdwevnd Trs Djd

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Turning length 1,000 mm Maximum swing diameter over bed cover 600 mm Swing diameter over face guide 420 mm Control SIEMENS Travel path - x 275 mm Travel path - z 1,065 mm Main spindle: Speed range - main spindle 16 - 3,200 min/-1 Drive power - main spindle 27 kW Max. torque 800 Nm Spindle diameter in front bearing 120 mm Spindle bore 85 mm Chuck diameter 260 mm Spindle head 220H5 Tool turret: Number of tool positions 12 pos. Shaft diameter 40 mm Turret switching time 0.8 sec. Tailstock: Quill diameter 100 mm Quill stroke 120 mm Tailstock mount MK 5 Lholhcdwjvxguts Ded Quill pressure max. 950 daN Feeds: Rapid traverse X: 10 / Z: 15 m/min Feed force X: 500 / Z: 1,000 daN Total power requirement 52 kVA Machine weight approx. 7.5 t Space requirement approx. 5.5 x 2.5 x 2.1 m Accessories 1 set of soft jaws for chuck various VDI 40 mounts

Year of construction: 1980, Condition: used, Main headstock for GILDEMEISTER NEF660 year 80 Spindle diameter:103mm Spindle speed : 22,5-1800U/min Spindle power:18,5KW 3-jaw chuck diameter 400mm Roehm. Ljljb S E Ulohcdw Dshd and 1 tailstock for NEF 660.

Condition: used, Year of construction: 2015, Technical details: turning diameter: 410 mm turning length: 500 mm control: 840 turning speed range - drive spindle: 5000 U/min spindle bore: 65 mm total power requirement: 65 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,67 x 2,10 x 1,91 m C-axis, chip conveyer filtermist flush gun internal cooling system 600 l , 20 bar , paperfilter driven tools on all stations hollow clamping unit, Ethernet, Lelhcjvtzu Djdw Dohd inkl. collet chuck Hainbuch inkl. 3-jaw chuck D = 250 / 65 inkl. 58 pcs. static toolholder, incl. 03 pcs. driven tools axial, incl. 02 pcs. driven tools radial, approx. 27.100 h "machine on", approx. 11.400 h "spindle on" machine in very good condition, under power in our showroom *

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Center height 350 mm Turning length 1000 mm Max. swing diameter over bed track cover 600 mm Max. swing diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed range longitudinal and face 0.5 – 5000 mm/min Rapid traverse longitudinal + face 9 m/min Main drive 30 kW Dimensions of the machine with chip conveyor L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 General description: CNC manual input control with programming input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology and display of all functions in plain text. Control keyboard, screen and handwheel in a separate chip protection hood. The EPL control offers the following options: Programs can be entered and changed manually with direct operator guidance via the EPL control without any programming preparation. NC programs can be entered in ISO/EIA standard via the RS 232 serial interface, output or entered directly by hand. Processing cycles: Roughing cycles for longitudinal, face and contour turning, also with allowance. Thread. Undercuts DIN 509 form E and F and DIN 76, grinding allowance can also be programmed. Axial and radial recesses according to DIN 471 and 472, also with base finishing. Radii 90° and chamfers 45°. Automatic cutting radius compensation for cycles, undercut, recess, radius, chamfer. Programming: Set-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, sub-program technology, masking levels for program parts. Zero point shift. Operating mode selection via menu. Program input and output: Lhslhsvr Eh Ejcdw Dsd In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck • Hinged chip conveyor • 12-way tool disk turret, 6 of which are driven tool holders • Electronic handwheel • Coolant system • RS 232 interface • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • Various tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2008, Condition: reconditioned (used), The used GILDEMEISTER NEF 710x3000 is a flat bench cnc lathe sturdy medium-large size, equipped with ECS 2401 cnc. it is also equiped with a quick tool change manual turret, a 600 mm diameter manual platform, an open steady rest, the belt tupe chip conveyor and the complete covering; machine overhauled with cnc replacement in 2008; height center 355 mm, distance center 3000 mm, spindle hole 92mm, diameter allowed on the carriage 410mm, diameter allowed on the bed 710mm; spindle unit 22 Kw, 1.800 rpm. Leljhzx Awjhcdw Djhd

Condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle diameter: 120mm, speed: 3050rpm, drive power: 12kW, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Lhjlhjvnd Tfjcdw Dod