Used Kaltenbach Cold Saw for sale (122)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 760 mm, cutting range round steel at 90°: 400 mm, saw band length: 5,920 mm, working height: 720 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: infinitely adjustable (1:7) Working range (round): max. 400 mm Working range (square): 400 x 370 mm Cut length (single stroke): 10 - 760 mm Dkedpfx Aey Ex E Nsd Nol Cut length (multiple stroke): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Min. finished part length: 10 mm (35 mm vertical) Note: Disassembly and loading can be offered by the seller at an additional cost. The roller conveyor is not included in the offer.

Condition: used, Year of construction: 1999, Kaltenbach TL350 Upcut Mitre Saw, 5m of Infeed Rails, 350mm Blade, 90 Deg of Mitre Adjustment, Manual Blade Operation. S/No. 121051 (1999) Decommissioned. Country of Origin: Germany Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dodjy H Ictjpfx Ad Nekl

Condition: used, Year of construction: 1990, Kaltenbach TL350 Upcut Mitre Saw with 7 Metre Graduated Guide Infeed, 350mm Blade, 90 deg of Mitre Adjustment, Manual Black Operation. S/No. 113199 (1990) 113200 (1990). Country of Origin: Germany Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dsdpfx Adjy H H Ibo Nokl

Year of construction: 2018, condition: used, Manual underfloor circular saw for saw blade up to Ø 250 mm Dkjdpfxoy Nm N Rs Ad Njl Swivel range for miter cuts -45°/90°/+30° Working area (Round) 90° 80 mm (Round) 45° 80 mm (Square) 90° 70 mm (Square) 45° 65 mm 220 V

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILSTAHL SÄGE-BOHRMASCHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill line combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drill line. This drilling saw line is ideally suited for economical sawing, drilling, center punching, marking (scribing) and thread cutting of profiles and flat steel bars in steel construction and the steel trade. The Kaltenbach KDX-S drilling machine is equipped with 3 drilling units, each with 26 kW drive power and 5 tool changers. The Kaltenbach M150 length measuring device (measuring carriage) together with the T13 transport system is designed for profile lengths of up to 18 m. The comprehensive transport system for the material transport of sectional steel also has cross tractors at the infeed and outfeed for the cross transport of the sections. The CNC control together with the Kaltenbach Profiline III software enables data processing in DSTV and DXF format. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, giving the operator a good overview. A gripper downstream of the saw is used to remove and eject the first cut or transport the profile to the outfeed area. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw drill line combination consists of: Kaltenbach KDX-S 1015 PROFILE DRILLING SYSTEM CUTTING BAND SAW MACHINE Kaltenbach KBS 1010 DG Dkjdpeymy Imsfx Ad Njl MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm Dksdpfx Aey D I Nnsd Nsl SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Condition: used, Year of construction: 2007, functionality: fully functional, Horizontal Bandsaw Manufacturer: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Manufacturer: Kaltenbach Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Working range (round): 360 mm Saw band dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15-90 m/min Dodpfx Aoy H D Rajd Nokl Saw band inclination: 3° Feed rate: 0 - 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor size: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC length measurement system, L = 8600 mm • CNC stop travel 7200 mm • Minimum quantity lubrication • Laser cutting line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1999, machine/vehicle number: 119305, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 360 mm, table height: 300 mm, Equipped with: - Mitre saws - Semi-automatic - Roller conveyors approx. 12 metres Dsdpsy Enuyofx Ad Njkl - Operating manual Subject to prior sale and errors excepted.

Condition: ready for operation (used), Year of construction: 2007, total width: 1,070 mm, total height: 1,780 mm, overall weight: 820 kg, product length (max.): 800 mm, Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details. • Saw blade diameter: 400 mm • Saw blade types: HSS solid steel, HSS segmental • Saw blade mounting: DIN 8576 • Centering bore: 50 mm • Number of carrier bolts: 4 pcs • Bolt circle diameter: 80 mm Dkodpsy D Srmsfx Ad Nel • Diameter of carrier bolts: 13 mm • Feed speed rate: 0–1000 mm/min (infinitely variable) • Quick return: 1550 mm/min • Rotary table adjustment: Manual, +/- 90° • Cutting speed (with 400 mm blade): 10/20, 13/26, or 15/30 m/min • Electric power equipment: 1.7 / 2.6 kW • Operating voltage: 3x 400V / 50Hz • Control voltage: 24V DC • Total current: 9 A • Main fuse: 16 A Additional equipment • Length stop T3/L 41 NC, 6 meters (Year 2013)

Condition: used, Year of construction: 2007, 1 unit KALTENBACH TL450 mitre saw with 2 roller conveyors, each approx. 200x47x120 cm. Colour: as shown, according to pictures and inspection. Year of manufacture: 2007. Condition: used. Dsdpfsy D Ncisx Ad Nskl Storage location: warehouse hall. Payment method: advance payment via bank transfer. Shipping: collection in person only from location Ditzingen-Heimerdingen.

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm Dedpfsy Dcu Eex Ad Nskl - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1998, machine/vehicle number: 119878, Offer 26098 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: • Round: 130 mm • Square: 120 mm • Flat: 305 x 40 mm or 240 x 85 mm - Miter adjustable left & right: 0° – 90° - At 45°: • Round: 130 mm Dodjy At D Iepfx Ad Nekl • Flat: 245 x 30 mm or 180 x 70 mm - Infinitely variable saw blade feed rate: 0 – 10 m/min - Saw blade cutting speed: 13 / 26 m/min - Saw drive: 400 V / 1.7 / 2.6 kW - Hydraulic drive: 400 V / 0.75 kW - Hydraulic material vice, steplessly adjustable clamping pressure - Handwheel for fine adjustment - Adjustable material stop - Coolant system - Discharge roller conveyor with length stop: 5000 mm - Infeed roller conveyor: 4000 mm - Space requirement: approx. W 800 x H 1770 x D 1020 mm - Weight: approx. 950 kg

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm Dkedpfey At Iyox Ad Nel WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: good (used), saw blade diameter: 400 mm, – Double miter Djdpoim Ezgjfx Ad Nokl – Mist lubrication system – Protective cap – 400V

Condition: good (used), Year of construction: 2000, Sawcapacity at 90 degree: Round: Ø303 mm Dedpfx Ajw Rz Shod Nokl Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm

Condition: ready for operation (used), Machine is disconected from power. Djdpfxohva I Io Ad Njkl

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm Dedpshz T Hfjfx Ad Nekl weight: 700 kg

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V Djdpjb Sciaefx Ad Nskl space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm Dsdpfxoby Hike Ad Nekl cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm Dsdpfx Adocu Dvus Nokl engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Condition: used, Year of construction: 2003, cutting diameter 500 mm saw band length 6990x41x1,3 mm cutting width 860x500 mm cutting speed 15-90 m/min Feed 400 mm/min Dkjdjyutwqopfx Ad Njl Rapid movement 2500 mm/min main drive motor 5,5 kW cutting length min. 8 mm total power requirement 8,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,3x1,2x2,42 m Single lift 3000 mm Multiple lifts possible Optional: Infeed roller conveyor approx. 8 m Outfeed roller conveyor approx. 10 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 150 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, Kaltenbach KKS 450E – very neat used machine from 2018 with 6 months warranty. Extra options: * Micro-dosing system & wet cooling * Horizontal (hydraulic) clamping cylinder 1 x The KKS 450E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chrome steel, brass, copper, bronze, etc. Benefits at a glance: - Clamping, sawing, reversing and releasing – all with a single lever - Saw height adjustable via a lever - User-friendly mechanical controls mounted directly on the machine - Excellent accessibility for saw blade changes and maintenance - Workpiece clamping device on both sides of the saw blade Djdpfxjyr S Szs Ad Njkl - Two cutting speeds for virtually all applications - Ergonomically positioned controls for user comfort - Adjustable sawing stroke limitation and rapid saw blade return All pre-owned Kaltenbach machines are supplied with a 6-month warranty as standard. Transport and installation available throughout the Benelux.

Condition: used, Year of construction: 1980, machine/vehicle number: 55155, disk of circular saw-Ø: 400 mm Dkodpfx Adoct Nc Io Njl cutting area at 90° round: 130 mm cutting area at 90° square: 200 x 80 bzw. 315 x 40 mm cutting area in mitre at 45° square: flach/hochkant 180x70/100x60 mm cutting speed: 19/28 m/min engine: 380 V, 1,7/2,6 kW space needed: 1100 x 1050 x 1620 mm weight: 850 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Dsdpfxsx Dl Dmo Ad Nskl

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: Dsdohzbipjpfx Ad Njkl 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.