Used Maxion Unimax 3 for sale (12)

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Spindle speeds steplessly adjustable: Giedpfx Aief Ey Auoiew Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 20 Drilling depth: 125 mm Overhang: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Overall height: 1,855 mm Weight: 250 kg Motor with pole switching: 0.8/1.5 kW Spindle speeds, stepless Range A: 80 - 1,440 min-1 Range B: 180 - 3,200 min-1 Gsdpjb Eli Hofx Aiieiw Digital display for speed, standard.

Condition: used, Spindle Speed 80-3200 U/min. 30 mm Giodpjzdu Uuefx Aiijw 25 mm table surface area 500x365 mm bore depth 125 mm throat 260 mm MK 3 distance spindle /table 90-840 mm T-slot - width 14 mm column diameter 110 mm weight of the machine ca. 270 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 150 h, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 35 mm, spindle mount: MK 3, drilling depth: 200 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,200 rpm, rotational speed (min.): 80 rpm, Powerful, precise drilling machine with a wide range of applications. Table adjustment via rack and pinion. Reversible switch for clockwise/counterclockwise rotation, digital speed display, prepared for milling attachment. Accessories: precision quick-change vise, clamping width 145mm, jaw width 125mm, angular surface 90° for vertical clamping. Used very little, as it was only used for small workshop prototype construction and test drilling with special tools; business closed due to retirement. Collection is possible in 85521 Ottobrunn. Technical data UNIMAX 3 Continuous drilling capacity in E335 3 - 25 mm Normal drilling capacity 30 mm Threading capacity M 4 - M 20 Spindle MK 3 Drilling depth 125 mm Overhang 260 mm Spindle / table 90 - 840 mm Table surface 550 x 400mm T-slot width 14 mm Column diameter 110 mm Overall height 1,855 mm Weight 225 kg Motor, pole-reversible 0.8 / 1.5 kW Power connection 400 V / 50 Hz Gisdezcfphepfx Aiiew Spindle speeds, stepless Range A 80 - 1,440 rpm Range B 180 - 3,200 rpm Standard packaging D - 220x74x125 cm

Condition: new, Column drill press Manufacturer: MAXION Model: UNIMAX 3 Condition: New machine Spindle speed (continuously variable): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment includes: Godob Hl Irjpfx Aiioiw - Full motor protection - Reversing switch (right/left rotation) - Digital speed display - Table adjustment via rack and pinion - Drill guard - Emergency stop button - Operating manual

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (stepless): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment: Giedjbrfmkopfx Aiijw - Stepless feed rate for drilling - Stepless speed control - Digital display for speed, feed rate, and drilling depth - Automatic tool ejector - Operating manual with the following options: - Thread cutting device

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 3 TAP Condition: New machine Spindle speed (continuously variable): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Goded Hrhvopfx Aiioiw Standard equipment: - Continuously variable speed control - Digital display for speed - Digital display for drilling depth - Thread cutting device - LED machine light - Automatic tool ejector - Operating manual

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel Gisdpfxofg U Tpo Aiiow - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U Giodpfx Aefg U Tneiisw spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: good (used), Year of construction: 2005, Offer 26119 Gjdpfx Aiey D Nxqsieiw Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 125 mm - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp Gsdpfx Aopam Hrjiioiw - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, COLUMN DRILLING MACHINE UNIMAX 3 Comparable to Alzmetall, Flott, etc. Powerful, precise column drilling machine with a wide range of applications. Drill table adjustable via rack and pinion and worm gear, and swiveling around the column. Forward/reverse switch, emergency stop button, digital speed display Infinitely variable spindle speeds Range A: 80 - 1440 rpm Range B: 180 - 3200 rpm Continuous drilling capacity: 25 mm Nominal drilling capacity: 30 mm Thread cutting capacity: M20 Spindle: MK 3 Drilling depth: 125 mm Throat depth: 260 mm Spindle/table distance: 90 to 840 mm Table surface: 500 x 365 mm Overall height: 1855 mm Weight: 250 kg Incl. drilling package, consisting of: 1 drill chuck arbor MK3 / B16 2 reducing sleeves MK3 / 2, MK3 / 1 1 machine vice MSP 140 Gijdpfowkhlijx Aiisw 1 keyless drill chuck 1 - 16 mm / B16