Used Mitsubishi Forklift for sale (366)

Condition: ready for operation (used), Mitsubishi / Mazak FX 53A BN624A240H05 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgedpfx Aoi Eb E Tji Tsu

Condition: ready for operation (used), Mitsubishi / Mazak FX 784B BN624A535H01 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgodpfx Aiei Eb Hxj Tsu

Condition: ready for operation (used), Mitsubishi BN624A471G54B / SE-CPU2 control board, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpei Eb Ivofx Ai Tjgu

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, empty load weight: 3,490 kg, driver cabin: other, Vehicle location: Bovenden. Type: 2.0-ton forklift, model FD20, lifting height 3300mm, load capacity 2000kg. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale and errors! Pedpfx Aji Rndasi Tjgu

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,609 h, load capacity: 3,500 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Technical condition: good Front tires type: Superelastic Front tires Condition: 60 - 80% Pgedpfx Aijunnuve Tsu Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. In addition to this vehicle model, we have approx. 120 other forklift trucks of all weight classes in stock in our warehouse in Meschede-Calle. Visit our homepage - rf-stapler installment plan & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our master forklift workshop specializes in repairing, servicing and overhauling your old forklift truck. We are also happy to display your vehicle for sale. Clamp fork, sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab,

Condition: new, Mitsubishi HA300NCB-S SPEC NO 84004 + Encoder OSA104 SN J4AVP4034B4, unused with signs of storage, 100% functional, scope of delivery as per photos Podpfx Asqx Ddvsi Togu

Condition: new, Mitsubishi HC202BS SN W62551002 + Encoder OSA104S SN J4AVU3QY987 ,unused with traces of storage, 100% functional, scope of delivery as per photos Pgedpfoqztu Ajx Ai Tju

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz Pjdpfx Aisfm A Ume Tjgu -Output: 6.0 A -Dimensions: 215/200/H185 mm -Weight: 4.8 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 220 mm Travel U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Psdpfx Aiey Emxqe Tsgu Operating hours: 28,500 h Machine weight: 2,700 kg

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, overall weight: 3,500 kg, number of axes: 5, This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Additional equipment • Cooling/Temperature Control: Cooling system with temperature regulation • Generator: Transistor pulse generator • Output Current: 50 A • Generator Size: 600 x 650 x 1765 mm • Generator Size: 600 x 650 x 1765 mm Machine Benefits Technical Machine Benefits • Maximum machining angles / height: 15° / 260 mm • Maximum workpiece size: 1050 x 820 x 305 mm • U-shaped table dimensions (w x d): 840 x 560 mm • M8 mounting holes: 52 • Wire diameter: 0. 1 – 0. 3 mm • Wire coil weight: 10 kg • Automatic wire threading and wire cutting: included • Tank capacity: 860 liters • Filter rating: 3 µm • Filter system: dual system // filter system weight: 350 kg Extra Information Controller Inputs: Keyboard, USB, Memory Stick, Ethernet Display: 15" TFT Touchscreen Positioning Accuracy: 0.1 µm Minimum Incremental Movement: 0.05 µm Maximum Programmable Size: ± 99999 mm Software: ADVANCE Plus with 3D CAD/CAM, 10 GB Memory, and Clear/Intuitive Layout Remote Communication Ready: mcAnywhere Pgjdpfx Aox D Rqfsi Teu Graphical Views: 3D, Front, Side, Top Machine Benefits ODS Optical Drive System Tubular Direct Drives on X, Y Axes Linear Scales on X, Y Axes Intelligent Automatic Wire Threading System Dry and Underwater Operation Capable Wire Straightening System Automatic Hole Detection 3D CAD/CAM Control System 5 Controlled Axes + Prepared for Additional Axes Precise Finish Circuit (PFC) Machining Long Life System (LLS) Design U-Shaped Hardened Segmented Clamping Table Compressed Dielectric (Water) Cooling System Remote Communication Ready (mcAnywhere) CE Version 30°/45° Wire Cutting Capability E.KO Ionizer 1501 Dimensions Machine Depth 2687 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 16,297 h, load capacity: 7,000 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,600 mm, drive type: Treibgas, LPG forklift Load centre: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Solid rubber Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 40 - 60% Fork positioner, 3rd valve, rear work light, front work light, heater, full cabin, Pedpfswtuz Aex Ai Togu

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 4,960 h, load capacity: 4,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Psdpfxoy T S Exs Ai Tsgu Rear tire condition: 40 - 60% Side shifter, 3rd valve, rear work light, front work light, heater, full cabin.

Condition: like new (used), Horizontal multi-joint SCARA industrial robotic arm - CE marking - Mitsubishi Electric (MELFA F-series type RH-6FH55) - 6kg max. load - 550mm reach radius - vertical limits +133mm...+333mm (200mm vertical stroke) - IP54 - equivalent to RH-6FH5520-D1-S15 Came from a working environment. Pedpfx Aioivfayo Tegu Please check out our other listings as well.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 1,006 h, load capacity: 2,500 kg, lifting height: 4,750 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Technical condition: good Front tires type: Superelastic Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. Sideshift, Pjdsu D Rbxepfx Ai Tegu 3rd valve, front work lights,

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm Pgedpfxey Egnxo Ai Tou • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Additional equipment • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)

Condition: used, mileage: 201,920 km, power: 92 kW (125.09 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,200 mm, total height: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 2,150 mm, * Mitsubishi Canter Fuso 3C13 * Twin tires * VIN: TYBFB833BE4DU06124 * Engine type: 4M4.2A3-73-40 * kW: 92 * Displacement: 2977 cc * Euro 5 * Unladen weight: 2790 kg * Payload: 635 kg * Gross weight: 3500 kg * Wheelbase: 3350 mm * Body internal length: 4.40 m * Body internal width: 2.15 m * Body internal height: 2.15 m * Vehicle length: 6300 mm * Vehicle width: 2200 mm * Vehicle height: 3200 mm * Tires: 195 / 75 R 16 C * Vehicle without VAT * All information provided without guarantee Pgsdpfx Asy Ng Umei Tju Tel./WhatsApp:

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 02DC2563, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, The machine will remain in operation until 08/04/2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 310 mm Podpsyzh Dajfx Ai Togu U/V-axis travel: 150 mm Max. workpiece weight: 1,500 kg Maximum workpiece dimensions: 1,050 x 820 x 305 mm Taper angle (workpiece height): 15 mm / 260 mm or 30 mm / 110 mm Table dimensions: 840 x 560 mm Possible wire diameters: 0.10 - 0.30 mm Wire spool capacity: 10 kg MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,687 x 3,030 x 2,150 mm Machine weight: 3,500 kg EQUIPMENT Hardened 3-sided table

Condition: used, mileage: 47 km, power: 85 kW (115.57 HP), first registration: 11/2025, fuel type: electric, maximum load weight: 815 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 2,800 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2020, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is stated, the current daily exchange rate applies. The valid currency is that of the vehicle's location. Wheel configuration 4x2, single cab, payload 2 t, GVW up to 6 t, wheelbase 2800 mm, heated mirrors, reversing warning system, airbags for driver and passenger, radio with Bluetooth, technical maximum permissible GVW 6000 kg, current registration GVW 4150 kg, up to 4250 kg as a BEV transporter can be operated with a category B driving license (please observe requirements!!). Pedpfx Asx Hbp Tei Tjgu

Condition: used, mileage: 587,500 km, power: 129 kW (175.39 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,500 kg, gearing type: automatic, emission class: euro6, Equipment: tail-lift, Tail lift: ----Refrigeration unit: ----- Automatic tail lift – air conditioning – Carrier Supra 550 Pjdpfx Aex Dzqvei Tjgu Suspension: Leaf suspension

Condition: used, mileage: 124,990 km, power: 107 kW (145.48 HP), first registration: 04/2010, fuel type: diesel, empty load weight: 3,605 kg, maximum load weight: 2,895 kg, overall weight: 6,500 kg, tire size: 215/75R16C, axle configuration: 4x2, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 7, Equipment: ABS, additional headlights, cabin, low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, rear window, heated mirrors, electric window left, electric window right, auxiliary heating, switch 6, ABS (anti-lock braking system), work lights, rotating beacon, stowage box, leaf spring suspension, trailer coupling ball head, G1 noise protection, U-protection, aluminum side bumpers, green environmental badge Pgedpfx Asvhicfoi Tou Body: Roll-off system AJK type NHS3-3150 for city containers up to 3.4m In February 2019 the coupling was renewed at 103600km! Spare wheel available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - .

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance Pgjdpfxeytkdro Ai Teu WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. Pgodpfxjyr Niqo Ai Teu External reference: 58

Year of construction: 1980, condition: used, MITSUBISHI MAF 210/150A CNC HORIZONTAL BORING MILL MITSUBISHI MAF210/150A, YOM 1980 . MAIN TECHNICAL DATA: Boring Spindle ..... 150 mm Milling Spindle ..... 210 mm Vertical Head Travel, Y-Axis ..... 3480 mm Column Travel, X-Axis ..... 14000 mm Ram Travel, Z-1 Axis ..... 700 mm Boring Spindle Travel, Z-Axis ..... 900 mm Spindle Speeds,4-Ranges ..... 4-800 RPM Rotary table 1600x2100mm Tailstock Many accesories (milling heads, chuck...) Podpfx Ajca Hr Nsi Tegu MORE PICTURES AND MOVIES ON REQUEST

Condition: used, Year of construction: 1977, Technical details attached. Rotary table 4500x4500 , travel 4000mm, max load 100 ton. Floor plates 6 pcs. 2000x4000 Pgjdpfx Aiscfkn Us Tsu It was retroffited with CNC Siemens 840D More pictures and details on request. Video with the machine working is available on request.

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m Pgodpfx Aienh R Nko Tju