Used Scm Olimpic K 560 for sale (591)

Condition: used, Year of construction: 2022, Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feed min: 12 m/min Feedrate max: 18 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: pneumatic Type: left-side machine Infeed barrier: Yes Control: SCM STARTOUCH Conformity marking: CE mark Lajlov Exkyjhccqmoa Weight: 1.797 kg

Condition: used, Year of construction: 2015, AUTOMATIC SINGLE-SIDED COMPACT EDGE BANDER K 560R No. AH/118547 MAIN FEATURES GLUE ROLLER: OPTIMAL GLUE JOINT FLUSH MILLING UNIT WITH 3 POSITIONS: FAST CONVERSION BETWEEN THIN, THICK AND SOLID WOOD EDGES TOUCH 7 CONTROL: ONE TOUCH IS ENOUGH TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge bander for gluing the edges with hot melt adhesive on the four sides of straight panels and for subsequent milling. Cold-rolled steel frame in a box construction, for high rigidity and freedom from vibration. Openings with chutes for unloading any remaining chips at the bottom. Pressure beam made of thick-walled steel construction and with steel columns, for a vibration-free structure where the working units are attached. Rollers on the double row feed chain, made of rubber with a high friction coefficient and sliding on bearing-mounted rollers. Device to protect the pressure rollers from any residual chips. Manual adjustment of the pressure unit at the machine inlet, with numerical control. Working units fixed to the pressure beam or mechanically linked to ensure automatic adjustment when changing panel thickness. Working units fixed to the lower longitudinal beam, for a precise reference in relation to the panel. All high-frequency motors are connected via frequency converters (inverters). Tool hood along the entire length of the machine, with polycarbonate window for a good overview of the units during processing. Two separate hoods are provided for access to the working units; The first with electrical locking for the pre-milling unit and gluing unit, the second with electromechanical locking for all other outlets, located on the pivoting control panel in an ergonomic position. The electrical system complies with current regulations. The electrical components are housed in the machine frame, with a door for easy access in case of panel failure. Panel feeding is carried out via a feed chain consisting of high-friction rubber sliders on a 1-1/4" industrial chain. The chain slides on two hardened steel guides, one round and one flat, to ensure linear advancement and protect against lateral misalignment. Manual lubrication of the external bearing roller conveyor positioned along the entire length of the machine; it consists of a telescopic opening system with sliding on linear bearings and plastic rollers with pivot pins. CONTROL SYSTEM "Touch 7" Control System. Main features: – 7" - 16:9 wide color touchscreen – Graphic representation of all processing units and their status (ON/OFF) – Graphic simulation of the machining operations to be carried out on each side of the panel– 60 work programs with direct configuration by the operator– Control of the machining units and automatic activation of the motors– Complete control of the machine through the PLC function and the encoder positioned on the pinion of the feed chain– Setting and regulation of the temperature of the glue pot– Selection of longitudinal and transverse machining without changing the program– Simple and guided diagnostics for easy error correction– Statistics on absolute data and individual machining operations: number of pieces, Lelovvkdmjhccqmeaa

Condition: ready for operation (used), Year of construction: 2015, General Data Laslhcev H E Riecqmoa Measurements width 1520 mm Measurements depth 4767 mm Measurements height 2126 mm Media Air pressure 6 bar This SCM OLIMPIC K 560 edgebander was manufactured in 2015. Designed for efficient edge banding, it's a robust choice for woodworking professionals. Consider the opportunity to buy this SCM OLIMPIC K 560 edgebander. Contact us for more information. Application Types Edge Banding

Condition: good (used), Year of construction: 2018, Functionality: fully functional, Edgebander (R0.22.50) - Electronic control "Orion One Plus" - Rectification group RT-V1 - Glue group VC-VM - Saw group K-2 - Milling group R-K Lslhccqowdxbusmjaa - Rounding milling group Round 1 - Belt scraping group RAS-V - 62.14.33 : Electronic control Touch 7 - 62.12.03 : Anti-stick group AAR - 62.14.06 : Saw group K-2 with rounding milling function - 62.12.81 : Glue scraping group RC-V - 62.12.49 : Infrared lamp - 62.12.84 : Quick change of glue pot

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Ljlhcsvkdtwjcqmoaa Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: AH / 120106, OLIMPIC K 800 COMPACT SINGLE-SIDED EDGEBANDING MACHINE FOR NARROW SURFACES PROPERTIES/PURPOSE/: -NO COMPROMISES IN THE SELECTION OF OPTIONS RELATED TO THE THE WORKPIECE -INDUSTRIAL BODY -SPEED: 18M/MIN STANDARD INCLUDING CORNER EARNING -INDUSTRIAL CHAIN 1 ¼" -STRONG AGGREGATES ON PLANNED FEET -MAXIMUM QUALITY OF FORMAT . -FOR 2 SHIFT WORK (8 H continuous work) -FOR DIFFERENT THICKNESSES OF EDGES CHANGED FROM THE DESKTOP -POSSIBILITY TO WORK WITH PUR GLUE. -TWO DIFFERENT RADII THANKS TO LIMITED RADIAL CYCLONE GENERAL FEATURES: - machine body made of welded steel plates with high rigidity - movable control panel - side roller support can be extended along the entire length of the machine - protective cabin - extraction stubs located on the protective cabin - electrical cabinet with lockable main switch - safety switches on entry and exit - inverter MOVEMENT OF ELEMENTS: - 1 ¼" industrial chain made of high-friction rubber-coated tracks - chain on 2 hardened guides, one round and one flat, thus ensuring straightness of movement and resistance to lateral pressure - top steel pressure beam with two rows of rubber wheels - manual adjustment of the pressure beam with automatic positioning of the working agents according to the thickness of the workpieces - mechanical working thickness counter WORKING AGGREGATES "RT-E" UNIT FOR PRE-MILLING OF THE PLATE "VC/800" GLUE UNIT "K/SEL" FINAL EDGING UNIT "RI-800" TILTING LONGITUDINAL MILLING UNIT "ROUND K" CORNER MILLING UNIT RAS/V RADIAL CYCLONE UNIT TECHNICAL DATA: - feed speed 12 - 18 m/min - thickness of a workpiece 8 - 60 mm Lolhccjuf S Dzjqmoaa - thickness of a workpiece when using Round 1 unit 10 - 45 mm - edging thickness range 0.4 - 8 mm - max. edging cross-section from roll 135 (3 x 45) mm2 - max. outfeed of edging outside the element 4 (2+2) mm - diameter of plate for edge band roll 780 mm - element repositioning beyond chain 30 mm - min. element length: with roll edging 140 mm with solid edge banding 200 mm - distance between elements 800 mm - min. width with thin edge banding (min. length 200 mm) 55 mm RT-E PRE-MILLING UNIT max. cross-section of material to be removed 55 mm2 max. thickness of material removed 3.0 mm power of each motor 1.8 kW spindle diameter 30 mm tool diameter 100 mm tool height 63 mm speed 9.000 rpm VC/800 GLUE UNIT - heating time 12 min - glue tank capacity 1,5 kg - installed power 3,0 kW K/SEL END TRIMMER UNIT - saw rotation speed 12.000 rpm - inclination range of saws 0 - 150 - engine power of each 0,35 kW RI/800 LONGITUDINAL MILLING UNIT - inclination range (RI/800 only) 0 - 25° - motor power each 0.65 kW - milling cutter speed 12,000 rpm "ROUND K" CORNER MILLING UNIT - tool rotation 12.000 rpm - motor power 0.55 kW - max. edging thickness 3 mm "RAS/V" RADIAL CYCLONE UNIT knives with profile 3 mm

Condition: new, Year of construction: 2022, Functionality: fully functional, machine/vehicle number: AB00026437, Easy to use and with everything needed to fully edgeband a panel, olimpic k 230 evo is the right answer for the company that wants professional-level edgebanding. Now a new model is available with a rounding unit that enables, with a low investment, uncompromising panel processing. Laelhccqouui Nujmoa

Condition: used, Year of construction: 2018, Functionality: fully functional, OLIMPIC K360 T-ER1 Előmaró egység X Végvágó egység: X Dönthető szintbemaró egység: X Egymotoros végkerekítő egység: X Ziehkling egység X Lapziehkling egység X Polír egység X Technikai adatok: Előtolási sebesség 11 m/min Előtolás motorteljesítménye 1,5 kW Önálló elszívó csonkok Munkadarab vastagság 8-60 mm Élanyag vastagsága 0,3-6 mm Tekercstartó átmérője 780 mm Minimális munkaszélesség: 90 mm Minimális munkahossz: Tekercsből 180 mm Szálanyagból (éllécből) 220 mm Két szomszédos munkadarab minimális távolsága: 600 mm Ragasztóanyag fűtőegysége Tartály kapacitása: 1-(1.5) kg Felfűtési idő: 12 perc Fűtőegység teljesítménye: 2,4 kW Végvágó egység Motor teljesítménye: 0,2 kW Fűrészlap dönthetősége: fix Fordulatszáma: 12.000 1/min Szintbemaró egység Motor teljesítménye: 0,3(0,55) kW Fordulatszáma: 12.000 1/min Lekerekítés rádiusza: 2 mm Round 1 végkerekítő maró egység Motor teljesítménye: 0,35 kW Fordulatszáma: 12.000 1/min Lekerekítés rádiusza: 2 mm Lapziekhling aggregát Ziekkling aggregát Lekerekítés rádiusza: 2 mm Polír egység Motor teljesítménye: 0,13 kW Fordulatszáma: 1.400 1/min Az Önök részére kialakított konfiguráció: Az ajánlatban szereplő gép 2018-as használt ára: Lajlhccsttuc Ssqmsa R0 02 03 scm Olimpic K360 T-ER1 CE előmarós élzárógép végkerekítő egységgel, Orion One Plus vezérléssel 10 09 98 CE norma 62 12 03 Tapadásgátló spray egység 62 14 06 K2 végvágó egység Radius funkcióval RAS-V Radius ziekhling egység 62 15 04 Lapziekhling egység 62 12 12 Políregység AUTOSET készlet Gyorscserélhető ragasztózó rendszer,kettős hőmérséklet szabályzó rendszerrel

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS Lajlhccevi Rd Toqmoa WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

Condition: excellent (used), Maximum working height: 45 mm Pre-milling unit Granulate glue station Pneumatic edge trimming from the roll Pressure zone with three rollers Precision edge trimming unit Ljlhcov Tk Nqscqmjaa Top and bottom milling unit with straight cutters Beveling capability Profiling unit Profile scraper Flat scraper Polisher Year: 2008

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 Moulder Laelswc A R Djhccqmsa Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Scm Compact k23 1 spindle 5.5 kW 2 3 spindles 7.5 kW Laslhccqowcwm Hjmoa 4 spindles 7.5 kW Max working height 120cm Max working width 230 cm Working speed 6/12 m/min Table length 2000 mm

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 2364 kg Main Drive Number of axis 4 Additional Equipment Infeed fence adjustment with servo motor Pneumatically adjustable pre-milling unit // Pneumatically controlled pressure zone // Pneumatically adjustable end trimming saws Edge gluing unit with pre-heating device Radius trimming unit, top and bottom, adjustable by servo motor // Radius scraper R2, pneumatically adjustable Corner rounding unit with 2 motors, pneumatically adjustable Surface scraper Polishing brushes Hot air blower // HOT-AIR system Glue injection system at the front and rear of the panel STARTOUCH control system // STARTOUCH control system General Data Machine weight 2364 kg Main Drive Number of axis 4 Additional Equipment Infeed fence adjustment with servo motor Pneumatically adjustable pre-milling unit // Pneumatically controlled pressure zone // Pneumatically adjustable end trimming saws Edge gluing unit with pre-heating device Radius trimming unit, top and bottom, adjustable by servo motor // Radius scraper R2, pneumatically adjustable Corner rounding unit with 2 motors, pneumatically adjustable Surface scraper Laslhcewct Awocqmja Polishing brushes Hot air blower // HOT-AIR system Glue injection system at the front and rear of the panel STARTOUCH control system // STARTOUCH control system This SCM Olimpic K800 edgebander was manufactured in 2011. Ideal for precise edge finishing, it supports a variety of banding materials. Durable and reliable, it's a great addition to any woodworking shop. Contact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2016, Functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: Lolhjwb Ha Tsccqmeaa – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: used, Year of construction: 1999, Number of boring spindles 4 St. Working width 230 mm Working height ca. 125 mm Length of the planing table ca. 2000 mm Feed motor 230 kW Feed speed 4-22 m/min. Lelevwfb Aohccqmsaa Dimensions (L/W/H) 3000x1500x1500 mm weight of the machine ca. ca. 2000 kg

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, edge thickness (max.): 8 mm, overall weight: 1,300 kg, Flexible edgebander OLIMPIC K360 HP TER1 (SCM Group) in rich configuration suitable for custom made production. Machine is equipped with MULTIRADIUS aggregates (ABS 1mm, ABS 2mm + thin edges + solid wood). Main technical parameters: - feeding speed: 11 m/min - panel thickness: 8-60 mm (max. 45 mm with rounding) - max. solid wood stripe: 8 mm - edge counter: only 99 km ! - weight: 1.300 kg Equipment and configuration of the machine: - control panel STARTOUCH (color LCD screen 30 cm) - internal lightning of working area - electronic top pressure adjustment - electronic adjustment of the entry guide for variable stock removal (EasySize) Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter diam. 100 mm, each motor 1,5kW) - glue pot with roller "VC-VM" (glue pot with quick-release system, EVA/PUR glue) - 2 pieces !!! - pressure rollers (3 pcs) with timed intervention - 2 motor end cutting unit "K-2" with 2 pairs of sawbladed (straight and radius) - radius trimming unit "R-HP" R1 mm, R2 mm + thin edges + solid wood 8 mm (each motor has: 2 electronic axis with bruhsless motor) Ljlhsu Skmkeccqmoaa - 1 motor rounding unit "ROUND 1" MULTIDEDGE R2mm + thin edges (1x electronic axis with brushless motor), diamond tool - radius edge scrapers "RAS-HP" R1 mm, R2 mm (each motor has: 2 electronic axis with bruhsless motor) - cleaning spray - glue scrapers "RC-V" - brushes"SP-V"

Condition: excellent (used), Year of construction: 2013, Automatic, single-sided, compact edge banding machine with the following equipment: Glue thickness max 6 mm Panel thickness max 60 mm Roll material thickness max 3 mm Workpiece length min 140 mm Feed rate max 9 m/min Granulate gluing system Bottom glue tray Strip magazine Joint trimming unit Cross-cut saw unit 2 motors Flush/radius/bevel stations Pneumatic intermittent units Left-hand machine version Machine length 3,725 mm Control system SCM ORION ONE PLUS Conformity marking CE mark Weight approx. 1,019 kg 100682 Standard 1 Safety regulations 010776 Olimpic K 260 EVO - version 'T' 930731 Volt 400 EU 931201 Frequency 50 Hz 621284 Kit for quick change of the glue container 621335 "Radius milling" with cross-cut unit K-2 621282 "Nesting" tracing roller for flush trimming unit R-K 621283 "Nesting" sensing roller for scraper unit RAS-V 621203 Release agent spraying unit "AAR" 621331 "Fast work" processing kit 621281 "RC-V" surface scraper 621126 Diamond tools for the pre-milling unit H 49 109993 Machine language German Note Used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Laoloukgugjhccqmea (Inquiries will only be answered with your address and telephone number).

Condition: used, Functionality: fully functional, SCM Method in ready-to-use condition. The machine is equipped with Vivaldi tools with frame thicknesses of 80 - 90 mm for wood, wood-aluminum, and heritage windows. This machine can produce approximately 60 - 80 windows per day. Laelhcov Tmi Hecqmea

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Lajlhju T Tuwjccqmja Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, Year of construction: 1998, Functionality: fully functional, type of input current: AC, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, operating pressure: 6 bar, Edgebanding machine overhauled in perfect working order, edge in rolls max 3mm Solid wood edge max 12mm Laslhccov Nyzuoqmja thickness max 56, with rounding unit 2 motors. Use and maintenance manuals, programming and wiring diagram

Condition: good (used), MIN. PANEL WIDTH MM. 55 MIN PANEL LENGHT MM. 140 MIN THICKNESS MIN MM. 10-60 EDGEBAND THICKNESS 0,4/3 COMPOSITION: PREMILLING STRIP MAGAZINE END TRIMMING SAW UNIT IN-LINE TOP AND BOTTOM TRIMMING UNIT TILTABLE TOP AND BOTTOM TRIMMING UNIT CORNER ROUNDING UNIT EDGE-SCRAPER PROFILE BUFFING UNIT Ljlhccsi E S Rljqmeaa

Condition: ready for operation (used), Year of construction: 1993, SCM Method K electronically controlled window production system The machine will be in use until February 18, 2025 and can be inspected in operation until then Condition Ready for use, always serviced by SCM Technical data see brochure Ljlovxvg Sjhccqmeaa Without milling tool. Available for an additional charge Year of manufacture 1993 Price 4500.-

Condition: new, Year of construction: 2023, GENERAL A complete and versatile edge banding machine for small and medium sized companies that can carry out a wide range of processing operations to a high quality standard in a small space. The SCM olympic 500 is available with both pneumatic and electronic unit adjustment and enables the processing of 2 radii, each with its own tool for workpieces with a minimum width of 60 mm. HIGHLIGHTS - quick and easy change of EVA and PU glue thanks to SGP-E glue pot - 2 radius processing on all units with multiedge tool - large touch-screen control panel with 'Maestro Active Edge' surface OPTIONS INCLUDED Interior lighting of the cabin and the gluing area NESTING sensing rollers 3 x release agent spraying unit Glue container' SPG-E (quick change color/glue type) 1.5 kg Edge preheating with infrared radiation Laolhsq A Tyzsccqmoa K2-Radius snipping unit incl. automatic positioning for (straight, chamfer and radius snipping) Chamfer and radius trimming unit R-HP incl. automatic pos. for e.g. chamfer trimming thin edges or flush trimming solid edges ROUND 2-A rounding unit for processing 1 radius and 1 thin edge Radius scraper unit RAS-A Surface scraper unit RC-N TECHNICAL DATA Edge thickness 0.4 - 6 mm panel thickness 8 - 60 mm min. panel width 60 mm Feed speed 12 m/min Machine length approx. 4700 mm

Year of construction: 2011, Condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Lelhcjnwkbcocqmeaa Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: good (used), Composition: - POSITION 1: header unit hp 5.5 *horizontal positioning motorized continuous axis *manual vertical positioning *electromill CVL100 *without spindle moulder unit rotation *cut-off headstock - POSITION 2: spindle moulder TL62 T hp 10 *manual horizontal positioning *continuous axis motorized vertical positioning *automatic anti-splinter device "JOLLY" Ljlhstq Hg Doccqmeaa *useful spindle length mm. 620 - POSITION 3: spindle moulder 320×50 mm. hp 7.5 *horizontal pneumatic on/off positioning. *positioning vertical motorized continuous axis - POSITION 4: spindle moulder 320×50 mm. hp 7.5