Used Stäubli Robot for sale (45)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: F/24/0060529/A/1, load capacity: 5 kg, arm reach: 670 mm, controller manufacturer: Stäubli, controller model: CS9-TX2-60, teach pendant manufacturer: Stäubli, input voltage: 230 V, repeat accuracy: 0.02 mm, Specifications: Maximum payload: Up to 4.5 kg Reach: 670 mm Number of axes (degrees of freedom): 6 Repeatability: ±0.02 mm Pneumatic connection: 2 pneumatic lines or optionally 2 solenoid valves: Bistable 5/2-way valves (compressed air), monostable 5/3-way valves (compressed air, mid-position closed), monostable 3/2-way valves (vacuum) Iedpfxsxca Dle Ahusal Electrical connection at the arm: 10 wires of 0.21 mm² + 3 wires of 1 mm² as well as a multibus Cat 5e cable with 4 wires and M12 connector Protection class (wrist): IP65 / (IP67 with overpressure unit) Safety: Up to class SIL3-PLe (human-robot collaboration: Safe limited speed, Safe stop, Safe zone, Safe tool) Controller and License: CS9 controller with VAL3 license Power supply: 400-480V-50/60Hz Connectivity: OPC UA / IP67 EtherCat I/O modules for connection of additional equipment, shielded Cat5e Ethernet for multi-gripper, camera, and sensors Horizontal cable outlet

Condition: good (used), Year of construction: 2011, Robot, Stäubli TX90 Lbmn, with CS8C control unit Panel and accessories - second-hand - : Price ex location: 14.250.-€ (net) Manufacturer: Stäubli Type: TX90 Year of manufacture: 2011 Iajdpfx Aoununpjhuel MachineNo.: F11/5G1VB1/A/01 Mass: 113kg Payload: 5kg Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2007, operating hours: 30,000 h, The Stäubli RX160 robot consumed 30,000 engine hours. Made in 2008. Necessary accessories (communication card, digital input and output card...) can be added to the robot as needed. The robot has had an oil change and is in good overall condition. All serviced in original Stäubli service. Maximum load capacity 34 kg. Nominal load capacity 20 kg Reach (between axis 1 and 6) 1710 mm Repeatability - ISO 9283 ± 0.05 mm Maximum speed at the center of gravity of the load 10.3 m/s Weight 248 kg Brakes - All axles Pneumatic: 2 solenoid valves 5/2-way (compressed air) monostable 1 straight line between base and forearm Electrical: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts) Iasdpfonrhgmex Ahuol Standard for clean rooms - ISO 14644-1 5 Protection class (*wrist) according to NF EN 60529 IP65 (*67) Stäubli controller series CS8 CS8C.

Condition: used, TECHNICAL DETAILS Iasdpfjug U Avsx Ahuol RX60CR from 1998 with its cabinet CS7B RX60B from 2002

Condition: ready for operation (used), Year of construction: 2017, Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible. Iodpfx Ahowt Tltsuoal

Condition: refurbished (used), Year of construction: 2009, overall weight: 48 kg, Stäubli RS 60 with CS8 C control / 2 pieces available, price per piece. The Stäubli RS 60 robot with the CS8 C control is the ideal solution for demanding and precise assembly tasks. Thanks to its compact design and high-precision repeatability, it is particularly suitable for industrial applications where precision and reliability are crucial. Technical details: Iodovvaclspfx Ahueal • Load capacity: Up to 2 kg, ideal for light to medium loads. • Axes: 4-axis robot for flexible movements and precise positioning. • Working range: 600 mm, ideal for compact work environments. • Inner radius: 166 mm, for working in tight spaces. • Repeatability: +/- 0.01 mm, guarantees maximum precision. • Dimensions (W x H x D): 810 x 976 x 710 mm. • Robust yet flexible. Scope of delivery: All parts and accessories included are shown in the pictures. Condition: Used, but still fully functional and ready for use. Note: All technical data has been carefully compiled. Subject to changes or errors.

Condition: excellent (used), Year of manufacture: 2011 Range: 1000 mm Control: CS8C Load capacity: 6 kg Iedpowcd R Sofx Ahujal Repeatability: ±0.03 mm Robot weight: 111 kg Axes: 6

Condition: excellent (used), Year of construction: 2018, The Staubli TX90L is a six-axis robotic arm characterized by a 15 kg payload capacity and a 1200 mm reach. This configuration enables the robot to perform a range of manipulation tasks within its defined operational envelope. Iasdpfx Aewd Ixpohusl

Condition: ready for operation (used), Year of construction: 2017, Two Stäubli robots including control units are available. 1) 2x Stäubli TX60 robots, year of manufacture: 2017, axes: 6, load capacity: 3.5kg, reach: 670mm, repeat accuracy: +/-0.02mm, weight: approx. 50kg, operating hours 1/2: approx. 46000h/52000h. 2) 2x Stäubli CS8C-TX60 controller, year of manufacture: 2017, documentation available. On-site inspection is possible. Iodpfx Ahewt Tlyoujal

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Ijdpsxt Nzbofx Ahueal Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) enables use in clean rooms Ijdjwbqwcopfx Ahueal or under aggressive environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long reach Advantages Perfect component protection. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance requirements Optimal use of the workspace Technical specifications TYPE TX90L Number of degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options: Floor / Wall / Ceiling Stäubli CS8 CS8C controller Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical specifications: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, 4-axis industrial robot, handling robot, SCARA robot, handling robot, loading robot, placer STÄUBLI type TS80 + CS8C bmn Year of manufacture 10/2011 Serial no. F11/5JN5A1/A Year 2011 Number of axes 4 Handling weight (rated load) 2 kg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeat accuracy (X+Y) 0.01 mm Repeat accuracy (Z) 0.004 mm Repeat accuracy (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Stroke axis 3 (Z-axis) 200 mm Iodpfsvmhphsx Ahuoal Rotation axis 4 (R-axis) +-500° Nominal speed / maximum speed: Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot configuration floor mounting Controller STÄUBLI CS8C bmn Serial no. F11/5JN5A1/C Rated voltage 1 x 230 VAC Rated frequency 50 - 60 Hz Connected load 1700 VA Dimensions of controller (W x H x D) 450 x 310 x 450 mm - Controller adjacent with removable "Teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Transport footprint L x W x H 900 x 700 x 1500 mm Very good condition

Condition: excellent (used), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots in the TX90 series for medium payloads offer the highest possible flexibility for many applications thanks to their compact, slim design. Thanks to the three mounting options - floor, wall and ceiling - the six-axis robots are easy to integrate. The completely encapsulated structure (IP 65) enables use in clean rooms or under aggressive environmental conditions. Features Iajdpfxjvx Tbts Ahuel Completely encapsulated structure with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Long range Advantages Perfect protection of the components. Standard version in clean room class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics and speed with reduced maintenance effort Optimal use of the work space Technical data TYPE TX90L Number of degrees of freedom 6 Nominal load capacity 6 kg Maximum load capacity 15 kg Range 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options floor / wall / ceiling Control Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) RAM 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), language PLC-IEC 61131-3 Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2009, functionality: fully functional, We offer the Stäubli RX160 industrial robot The high-performance 6-axis Stäubli RX160 industrial robot is the ideal solution for applications requiring speed, accuracy and reliability. The robot offers exceptional rigidity, compact design and a wide working range, which makes it ideal for use in the automotive, plastics, electronics, food and healthcare industries. ✔ Load capacity up to 30 kg (20 kg nominal) ✔ Working range 1710 mm ✔ Repeatability ±0.05 mm - ideal for precision operations ✔ Fully enclosed design (IP65 / IP67) for harsh environments Iedpsx Dzakefx Ahujal ✔ Cable and hose routing inside the arm - a clean and safe workspace ✔ Rigid design for precise trajectories ✔ Floor or ceiling mounting possible ✔ CE, UL, CSA certification

Condition: excellent (used), Year of construction: 2012, Sandblasting cell with Staubli TX60L robot Country of origin: France Year of manufacture: 2012 Control system: CS8C-TX60 Number of axes: 6 Isdpfx Ahjqgch Eoujal Maximum load capacity: 5 kg Nominal load: 2 kg Reach: 920 mm Repeat accuracy: 0.03 mm Cell: ALPROBOTIC MB100

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Payload: 5 kg Ijdpfxev Hdk Ij Ahueal

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: F21/0023666, Equipment: documentation/manual, Technical Specifications: Maximum load: 20 kg Nominal load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic connection: 2 direct lines between base and forearm 2x solenoid valve 5/2 way bistable (compressed air) Electrical connection on the arm: 17 electrical I/O lines Multibus cable inside the arm: 13 electrical lines, 4 multibus cat5e lines, DIN M12 Standards and degrees of protection: Iasdpfspd In Dex Ahujl Standard for clean rooms - ISO 14644-1: Level 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensuring the highest level of safety. Management and License: CS9 management with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable). This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For more information or a tour, contact us by email or phone (in English). We are here for your questions and look forward to your interest.

Condition: new, Year of construction: 2018, operating hours: 9,000 h, functionality: fully functional, overall weight: 110 kg, load capacity: 14 kg, arm reach: 1,000 mm, pivoting range: 360 °, repeat accuracy: 0.03 mm, Equipment: documentation/manual, For Sale: Stäubli TX90 Industrial Robot – High Precision, Lightly Used Model: Stäubli TX90 Reach: 1000 mm Repeatability: ±0.03 mm Operating hours: only 9000 mth (powered on, not in continuous operation) The robot is in excellent technical condition, fully functional, and ready for immediate use. Ijdpfxjxuwghj Ahuoal Perfect for applications such as handling, assembly, gluing, dispensing, machine tending, or light machining. ➡️ Key advantages of the TX90: Compact design with optimal 1000 mm reach High dynamics and accuracy (±0.03 mm) Fully enclosed structure (IP65 / IP67 depending on configuration) – suitable even for demanding environments Compatible with CS8 control systems

Condition: like new (used), Year of construction: 2017, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: F17/5EWVB1, overall weight: 350 kg, load capacity: 30 kg, arm reach: 1,700 mm, I offer the Stäubli RX160 robot, the option to add a uniVal Drive The robot is in almost new condition, used only 4500 hours motor see. photo. Maximum load 30kg Nominal load 20Kg Reach (between axis 1 and 6) 1710 mm Number of degrees of freedom 6 Iaedpsr Dvd Isfx Ahuel Repeatability - ISO 9283 ±0.05 mm Stäubli series controller CS8C Weight 248 Kg

Condition: used, Year of construction: 2009, operating hours: 50,000 h, functionality: fully functional, load capacity: 12 kg, type of input current: three-phase, Equipment: documentation/manual, We offer a Stäubli TX90 or TX90L robot with CS8C control. The robot is level C after robot maintenance by Stäubli service. The TX90 robot has a reach of 900 mm. The TX90L robot has a reach of 1200 mm. Iajdpeurvufofx Ahusl We supply the robot with a connecting cable between the robotic arm and the control unit. It is also possible to order the SP1 control panel and other accessories. .