Used Tec Freetec for sale (111)

Condition: used, functionality: fully functional, empty load weight: 8,810 kg, maximum load weight: 25,690 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 03/2000, suspension: air, tire condition: 50 %, color: blue, M-Tec Mathis 146 Silo transporter 2 axles Overall length of trailer: 6.90 m Lajdpfxsy Ud A Sj Ammoc Air suspension GVWR 34,500 kg - Payload 25,690 kg Tires: 50% tread remaining Net export price: 15,000.00 Euro All information subject to change without notice; errors and omissions excepted.

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle Laedpfxjy Sqrbe Ammec * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) Ledpswwn Abjfx Ammoac * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: used, axle configuration: 3 axles, first registration: 06/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: tread left: 25%; tread right: 25% Rear axle 2: tread left: 25%; tread right: 25% Rear axle 3: tread left: 25%; tread right: 25% Lajdpfoy Rt Ipox Ammec Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-95-KH

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 540 mm, feed length Y-axis: 635 mm, feed length Z-axis: 400 mm, coolant supply: 10 bar, number of spindles: 1, Röders TEC RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center (2018) We are offering a Röders RXP 601 DSH machining center from 2018 in excellent condition. This machine guarantees top precision in high-speed milling and precision grinding and is ideally suited for demanding mold making, tool manufacturing, and the production of precision components. Technical Highlights: - 5-axis CNC milling and grinding center (X/Y/Z + A/C) - Travel paths: 540 × 635 × 400 mm - Levicron high-precision air bearing spindle - Air bearing technology, virtually frictionless - Operating pressure up to 10 bar - Ideal for HSC milling and fine grinding - Integrated grinding unit with oil - Oil-based coolant lubricant Lsdjydu Upopfx Ammjac - Grinding oil filtration and treatment system - Designed for ultra-precise grinding processes - Direct drives and optical direct measuring systems on all axes - Thermally stabilized design for maximum dimensional stability Condition: very good

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Laedpjy Nzuhjfx Ammsc Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. Lodpfx Amexcvgismsac The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: new, functionality: fully functional, color: orange, overall weight: 72 kg, Year of construction: 2026, Equipment: hydraulics, The TEC-POINT Hydraulic Breaker KT40 in Top Type-S configuration is the professional solution for demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, and compact job site applications with mini and compact excavators. Thanks to its robust construction, compact size, and reliable impact performance, the KT40 is ideally suited for daily use on construction sites. The top-mounted design ensures efficient power transmission and excellent operating reach when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 0.8 to 2.5 tons 📍 Available immediately from stock in Rheda-Wiedenbrück 🚚 Local pickup or Europe-wide shipping via freight forwarding available 💶 Price: €1,200 net plus statutory VAT – negotiable 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT40 Top Mount S 🔹 Configuration: Top Type-S / straight design 🔹 Suitable for carrier weight: 0.8 to 2.5 tons 🔹 Weight: 72 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 15–30 l/min 🔹 Impact frequency: 800–1400 blows per minute 🔩 Mounting dimensions / Compatibility Lasdpoy N R Azsfx Ammoc 🔹 Mounting width: 92 mm 🔹 Pin center distance: 90 mm 🔹 Pins/Bore: Ø 25 mm 🔹 Chisel diameter: 40 mm We would be pleased to check the appropriate mounting for your excavator model and coordinate it individually upon request. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and help you choose the suitable hydraulic breaker for your carrier unit. We warmly invite you to visit our warehouse in Rheda-Wiedenbrück. On site, you may view, compare, and, by arrangement, test our machines and attachments. We look forward to your inquiry!

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2003, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - EBS - Toolbox = Further information = Axle configuration Tyre size: 385/65R22.5 Axle manufacturer: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Kerb weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Identification Laedpfeyxlwlex Ammsc Registration number: OH-08-HS

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Ledpfsy Rgalox Ammeac Electronic handwheel

Condition: new, functionality: fully functional, overall weight: 129 kg, Year of construction: 2026, Equipment: hydraulics, low noise, The TEC-POINT KT45S hydraulic breaker in silenced design is the professional solution for demolition work, concrete breaking, foundation jobs, civil engineering, pipeline construction, landscaping, municipal worksites, urban operations, and jobs in noise-sensitive environments. The fully enclosed housing reduces noise emissions and protects the internal components. The replaceable upper swivel mount ensures flexible attachment options, while the long overall length provides high reach and efficient power transmission. ✅ Complete package for mini and compact excavators from 1.2 to 3.0 tons ✅ Brand new / unused unit 📍 Immediately available from stock in Rheda-Wiedenbrück 🚚 Collection on site or Europe-wide shipping via freight carrier possible 💶 Price: €1,699 net plus VAT 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen cylinder, hydraulic hose kit, service case – Ready for immediate use! ⚙️ Technical Specifications: 🔹 Model: KT45 Silenced Type 🔹 Version: noise-insulated design 🔹 Suitable for excavator operating weight: 1.2 to 3.0 tons 🔹 Weight: 129 kg 🔹 Operating pressure: 90–120 kg/cm² 🔹 Required oil flow: 20–40 l/min 🔹 Impact rate: 700–1200 blows per minute 🔩 Connection dimensions / Compatibility: 🔹 Mounting width: 97 mm 🔹 Pin center distance: 92 mm 🔹 Pins / Bore diameter: Ø 30 mm 🔹 Chisel diameter: 45 mm Upon request, the corresponding mounting bracket can be tailored to your excavator model. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Laedpfx Asy Ny Igommjc Germany 📞 Contact & Inspection Please feel free to contact us today – we will provide you with personal advice and assist you in selecting the suitable hydraulic breaker for your carrier machine. You are warmly invited to visit our warehouse in Rheda-Wiedenbrück. On site, you can view, compare, and test our machines and attachments by appointment. We look forward to your inquiry!

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,500 mm, total width: 7,500 mm, total length: 1,000 mm, SPECIAL PRICE – only €5,900 instead of €6,900! Save €1,000 now – limited-time special offer. Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model with 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser Welding – precise, deep, and virtually distortion-free Laser Cutting – ideal for thin sheets up to approx. 4 mm Laser Cleaning – effectively removes rust, paint, and oxide Seam Cleaning – cleans the weld seam immediately after welding Lasdpew Tfbrofx Ammjc 📌 Technical Specifications: Laser power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Fiber optic cable: 10 meters Cooling: Integrated water cooling Operating modes: Welding, cleaning, cutting, pulse Voltage: 3×400V / 50–60 Hz Welding speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Delivery Includes: 1× LMH1500 Laser Welding Machine 1× Handheld Welding Gun with nozzles 1× Automatic Wire Feeder 1× Laser Safety Glasses 1× User Manual (German) 1× CE Declaration of Conformity 1× Risk Assessment according to Machinery Directive 💼 Areas of Application: Suitable for stainless steel, galvanized sheets, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment according to EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: Delivery via freight forwarding (pallet shipping) within Germany & EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) Laodpjy Iwd Aefx Ammoc - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) - Transmission: Hydrostatic drive - Fuel tank: 160 litres (42 gallons)

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Year of manufacture: 2025 Operating hours: Lasdpfey Iwdvjx Ammoc

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 2,150 mm, year of last overhaul: 2025, total width: 550 mm, total height: 700 mm, DGUV certified until: 05/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, Long Version Belt width: 350 mm Belt speed continuously adjustable Stainless steel design DGUV V3 tested exclusively by us Dimensions approx.: 2150 x 550 x 700 mm (W x D x H) Connection: 230 V Ledpfxoy Ik Arj Ammoac Used machine, cleaned & SAB inspected Visit our large exhibition!

Condition: like new (used), functionality: fully functional, input voltage: 230 V, total length: 1,200 mm, year of last overhaul: 2025, total width: 500 mm, total height: 1,050 mm, DGUV certified until: 06/2027, conveyor belt width: 300 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC dough conveyor belt, foldable Belt width: 300 mm Belt speed: infinitely adjustable Stainless steel design Exclusive to us: DGUV V3 tested Lajdpfxjy Ik Alo Ammjc Approx. dimensions: 1200 x 500 x 1050 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB tested We have many more bakery machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 700 mm, year of last overhaul: 2025, total width: 550 mm, total height: 800 mm, DGUV certified until: 05/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, short version Belt width: 350 mm Belt speed infinitely adjustable Stainless steel construction DGUV V3 tested exclusively by us Dimensions approx.: 700 x 550 x 800 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB tested Ljdpfoy Ik Afox Ammjac We have more bakery machines in stock!

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Lodpfx Amolqwz Temeac

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, total width: 2,470 mm, total height: 1,350 mm, suspension: air, tire size: 385/65R22.5, color: black, Year of construction: 2026, Axle configuration Tyre size: 385/65R22.5 Make axles: VALX Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.855 kg Laedoy Ec A Eopfx Ammoc Carrying capacity: 39.145 kg GVW: 44.000 kg Maintenance APK (MOT): tested until 04/2027 Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Registration number: OX-80-FD Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks

Condition: like new (used), Year of construction: 2023, operating hours: 2,983 h, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: RMS6, spindle speed (max.): 24,000 rpm, spindle nose: HSK63A, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Röders RXP601 DSH incl. Automation RCE2 X-axis: 540 mm Y-axis: 635 mm Z-axis: 400 mm Clearance table/spindle: 485 mm Spindle: HSK63A, 24,000 rpm MHT medium distributor incl. holders and nozzle bodies included Compressed air through spindle Machine table: Erowa UPC 320x320 Tool changer: 64 positions Preparation for emulsion cooling and high-pressure coolant (IKZ) Options package: - Thermo package for maximum precision - Spindle compensation - Blum measuring laser for tool measurement - Handbox with display - Workpiece cleaning with compressed air - Tool cleaning with spray medium - Automatic machine calibration for maximum precision even with fluctuating temperatures - UPS for machine control - Remote maintenance - 3D measuring probe, automatically thermostable cone - Oil mist extraction with mechanical filter - Emulsion machining, preparation for high-pressure 40 bar pressure stages - Medium distributor: 1 medium/3 delivery rates - Medium distributor operation with MV2 - Front machine door as automatic lift door - Chuck control, dual pneumatic - Job manager RMSMain - Stainless steel internal cover - 3D machine model Ljdsy Ez Utepfx Ammjac Automation RCE2: 10-position pallet changer for Erowa UPC pallets with max. dimensions 340x340 mm Maximum load per pallet: 300 kg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, spindle speed (max.): 30,000 rpm, spindle nose: HSK63, Equipment: chip conveyor, rotational speed infinitely variable, Röders RXU1000DSH X-axis: 700 mm Y-axis: 855 mm Z-axis: 500 mm The clearance height between spindle nose and machine table is 600 mm Spindle: HSK63F, max. 30,000 rpm Tool magazine: 24 slots – optionally expandable Equipment: - Automatic machine calibration for highest accuracy - Spindle compensation - Compressed air through spindle - Remote maintenance - Emulsion cooling with IKZ 40 bar - Emulsion mist extraction - Work area rinsing - Automatic 3D probe - Blum tool measurement laser Lajdpfx Ajy E Aa Djmmoc - Workpiece cleaning with compressed air The machine is completely overhauled, measured, and inspected in our facility. It fulfils the original manufacturer's specifications regarding geometry!

Condition: used, Year of construction: 2007, operating hours: 2,568 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,900 kg, pressure: 200 bar, electrical fuse: 27 A, We offer this used LUX VM-TEC K50V4 baler for paper, foil, and plastics, year of manufacture 2007. The baler comes complete with conveyor. Model: K50V4 Year of manufacture: 2/2007 Production number: abba359 Serial number: Cont-000089 Power: 18.5 kW Current: 27 A Voltage: 400 V Frequency: 50 Hz Maximum pressure: 200 bar Weight: 4,900 kg Lasdsy H E R Iepfx Ammsc If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2017, total width: 2,470 mm, total height: 1,540 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Rear axle 4: Max. axle load: 9000 kg Weights Empty weight: 6.358 kg Carrying capacity: 37.642 kg GVW: 44.000 kg Condition Lsdpoy Dcbfefx Ammsac Technical condition: good Visual appearance: good Identification Registration number: OV-84-VK = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, Lasdpfxsvt Dwbj Ammec vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Nice 2013 D-TEC FLEXITRAILER 45FT High Cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle = lift axle, extendable in 2 positions (middle and rear) + fixed front, suitable for 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg; Gross vehicle weight: 43,000 kg; tyres: 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm). Dutch registration with valid MOT (APK) until 26.10.2026. 2 units available. = Further information = Lasdpfx Aox T Di Nsmmjc Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg Gross vehicle weight: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Maintenance, history and condition MOT (Technical inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OX-40-BN Further information Contact Arne Honingh for more information.