Used Krones Bottle Washer for sale (2,721)

Condition: used, Year of construction: 2007, Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customer's needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table Decrater | Krones | Linapac II | 2012 Machine can work as crater and decrater Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counter Pressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspection | KHS | 2013 Includes bottle rejection system and conveyor belt Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared to work with seal label With servo driven bottle orientation Crater | Krones | Smartpack | 2011 Crater Palletizer | Transpak | NEW Bornbinder | Born| - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate or bottle conveyors will be individually adapted to the plant design, manufactured in KHS/Krones standard. Necessary format parts for bottle, label, crate and cap handling can be supplied. Fjdpfjxf D Dbex Ad Nspg

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Fpedpfxjtxd A Ss Ad Nog

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical condition, dismantled blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1 Fpjdpfx Adeyb Sa Ds Neg

Condition: used, Year of construction: 1999, Overview  This bottle washer was manufactured in 1999 by Italian company BODINI (model 201-10/66-11V). The machine is used for lemonade and syrup applications and has been maintained every 6 months by the owner. It remains in production until February 2026, where it can also be visited. After production stop, it will become available for removal. Technical data  Capacity: 4,500 bph Formats: 1 L 75 cl 33 cl Dimensions: 6.7 m × 2.2 m 0.5 m conveyor ≈ 2 m height Heating system: Electric heating system, 165 kW Power consumption: 160 kW with electric resistance 10 kW otherwise Air supply: 5 bar Fjdpfxeyb Tito Ad Nepg

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Fedpfjl Hx Adox Ad Nepg

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Fsdpfxot Ul Exe Ad Nspg

Condition: used, Year of construction: 2002, Overview This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for bottling still and sparkling water in PET bottles with an Alaska neck finish. The line is in production until September 2025 and can be viewed in operation by prior appointment. Technical details Output: 22.000 bph (the nominal speed at 0.5 is 25.000 bph) 60 rinsing nozzle 80 filling valves 15 capping heads Product: Water Container material: PET Neck format: Alaska Label type: OPP Capper brand: Zalkin Years of manufacture: 2002, 2009, 2013 Scope of delivery  Compressor: Atlas Copco ZD2300VSD (2009) Blowing machine: Krones Contiform S14 (2009) Air conveyor: Eurosistemi (2002) Filler: Krones Volumetic, Variojet (2002) Labeler: Krones Contiroll (2013) Fjdpfx Ajwqpgzed Nopg

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Fpodswzvl Sspfx Ad Nsg

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Fedoxhf Hijpfx Ad Njpg

Condition: used, Year of construction: 2012, Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected Scope of Delivery  Depalletizer | Kettner | 60 pallets/hour | 1992 | Automatic, glass bottles Decrater | Kettner | 2,500 crates/hour | 1992 | For returnable crates Crate washer | Seroba | 2,500 crates/hour | 1992 | Stainless steel, single bath Bottle washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, return operation Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), pitch 125mm + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/hour | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 liters/hour | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/hour | 2012 | Inkjet printer Packing machine (Crater) | Kettner | 2,200 crates/hour | 1992 | Automatic Palletizer | Kettner | 50 pallets/hour | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/hour | 1992 | With stretch film Pallet labeler | Logopak | 60 pallets/hour | 2014 | Labeling of pallets Bottle conveyor belts | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Fsdpfx Adjxrcv No Nopg

Condition: good (used), Year of construction: 2001, Krones bottle washer, year of manufacture 2001 676-039 6000 bottles/hour, 0.2l-1.0l bottles Machine will be available in December 2026 Fpedpfex N I R Nox Ad Neg 6000 bottles/hour

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Fpedpexqmrfofx Ad Neg Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Fpsdpsvgt Ucofx Ad Nsg Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.

Condition: used, Year of construction: 2012, Technical Summary and Application Scope – ATES Giorgia 8000 bph Fodpfx Adoxqmqzj Nopg The ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections. Main Technical Data Type: Industrial glass bottle washer and rinser, suitable for recycled and new bottles. Nominal output capacity: up to 8,000 bottles/hour depending on bottle format, contamination level, and line configuration. Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows. Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance. Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing. Installed electrical power: approx. 20 kW. Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley). Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar. Drainage: integrated rinse and tank drainage via 2″ pipeline. Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection. Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage. Filtration: internal filtration plus 0.2 μm microfiltration for process water. Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency. System Architecture and Process Flow Returnable bottle cycle (full washing and rinsing) Automatic loading into baskets via push bars. Pre-wash spray to remove dirt and label residues. Immersion in hot caustic bath to disintegrate adhesives and organic matter. High-pressure internal and external washing through jetting manifolds. Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water. Continuous label and debris extraction with filtration to prevent clogging. New bottle cycle (rinsing only) Spray pre-wash. Pre-treatment with detergent solution. Internal and external washing as required. Multi-stage rinsing and transfer to filling or storage. Immersion and label management stage Pre-wash and wash for removal of labels and residues. Sequential immersion and spray jets with controlled dosing and temperature.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. Fodsxm Rwqjpfx Ad Nspg THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, Year of construction: 2016, Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology. Additional title: Empty bottle control Capacity filline line: 12000 bo/h Current: 6 A Voltage: 400 / 230 V Frequency: 50 Hz Running direction: left -> right Operation / Control: Simatic S7 Position: in a footed housing Fsdpfx Adsy Nnbbs Njpg Base construction: straight-running Features: Control and display panel, housing with safety doors, bottle discharge

Condition: used, Year of construction: 2005, 6-head packer for 0.5 litre and 0.33 litre glass bottles: Krones Linapac II E35 LT1G Bottle holder: 6 x 20 or 6 x 24 bottles Additional title: Packing machine for bottle crates Performance: 50000 bottles/h Air consumption: 0,0002 m³ / bottle Power: 24,5 kW Voltage: 230/400 V Frequency: 50 Hz Length: 6160 mm Fodpfx Aexbqldjd Nspg Width: 4120 mm Height: 5033 mm Formats: 0.5 l glass bottle (D = 68.5 mm, H = 270 mm; Ale / Longneck), 0.33 l glass bottle (D = 61 mm, H = 238 mm; Ale / Longneck) Running direction: right -> left Operation / Control: PLC, control cabinet with touch panel Position: free standing Base construction: Square tube frame on dome feet Features: 1 basic machine (lifting mechanism, horizontal linear unit, gripper head carrier, movement axes), 2 gripper head sets (frame with 6 ring gripper heads, 20 (24) ring grippers each, pulling device, manual changing device, insertion frame, vibrator set, folding unit for completeness control, terminal strips for guide plate adjustment), shelf magazine (magazine locations with drive for automatic storage), container transport, container transport, safety device, electrical and pneumatic equipment Periphery: Buffer tables for empty and full boxes Layer patterns: 6 x 20 across, 6 x 24 across, 20 plastic crate (400 x 300 x 300 mm), 24 plastic boxes (400 x 300 x 270 mm),

Condition: used, Year of construction: 1991, Additional title: cold glue labeling Fpodevcqwtspfx Ad Nog Nominal capacity of filler: 50000 b/h Formats: Neck-/ breast-/ body-/ back-labels Running direction: left -> right Operation / Control: Siemens S5 Features: 2 cold glue stations

Condition: used, Year of construction: 2000, Empty bottle inspector Manufacturer: Krones Model: Linatronic 712-M1; Year of manufacture: 2000 Additional title: Empty bottle inspection machine Capacity: 32000 Bottles/h Length: 4200 mm Width: 1100 mm Height: 2900 mm Formats: 0,5L NRW, 0,33L Vichy, 0,33L Euro, 0,35L Lemonade Running direction: right -> left Operation / Control: Simatic S7-300 Fsdpfew Taypsx Ad Nopg Position: free standing Base construction: Square tube frame on dome feet Features: Basic machine, detection and inspection systems, rejection systems, supply/machine protection, drives, conveyor belt

Condition: used, Year of construction: 2000, Conveyor belts for glass bottles, with 2 unpressurised converging conveyors Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/h Manufacturer: Krones Year of construction: 2000 Additional title: free container conveyors Capacity approx.: 33000 Bottles/h Free bottle transport approx.: 115 m 90° Bottle transport curves: 10 pc. Conveyor belt widths: 4 conveyor belts Fpsdpfx Aew Ta Hcjd Nsg Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-400 / S7-300 Material: Mainly stainless steel Position: free standing Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle mergers (17/9/7/5/3/1 and 12/7/3/1 conveyor belts), automatic belt lubrication

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport Fpjdpfow Tmt Asx Ad Neg

Year of construction: 2000, condition: used, Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h Additional title: Bottle washing machine Capacity: 39000 Bottles/h Length: 12700 mm Width: 4700 mm Height: 3500 mm Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-300 Position: free standing Base construction: Single-end machine, self-supporting housing on dome feet Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station Layer patterns: 22 bottles per basket row Fodpfow Taxfsx Ad Njpg

Condition: used, Year of construction: 1994, Combined bottle filler with labeller ‘Krones Bloc’ Additional title: Monobloc arrangement Capacity: 7000 bo/h Power: 38,1 KVA Current: 55 A Voltage: 230/400 V Frequency: 50 Hz Formats: 0.5 litre NRW (belly/neck/back), 0.33 litre Steinie (belly/back), 0.33 litre Longneck (belly/neck/back) Running direction: left -> right Operation / Control: Siemens S 5 Fpodpfx Adoxb Ahwj Nsg Position: free standing Features: Labeller Universella Periphery: miho inspection device

Condition: used, Year of construction: 2000, Bottle filler Manufacturer: Krones Short tube filler with double pre-evacuation Model: Mecafill VKVP 084-094 Year of manufacture: 2000 The capper runs with twist-off and standard crown corks Additional title: Filling and Capping machine Capacity: 30000 Bottles/h Length: 7000 mm Width: 4500 mm Height: 3800 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Machine partitioning: 84 filling valves, 12 cappers Running direction: right -> left Operation / Control: Simatic Fpedpjw Tay Asfx Ad Nog Material: mostly stainless steel Position: free standing Base construction: Square frame construction on domes Features: 1 capper for standard and twist off crown caps, 84 filling valves, 12 cappers, protective housing with glass doors, vacuum pump Periphery: Crown cap feed, fill level control,

Condition: used, Year of construction: 1995, Capacity: 20000 l/h CO2 connection pressure: 10 bar Current: 69 A Voltage: 230/400 V Frequency: 50 Hz Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar Water: Connection pressure: min. 4, max. 5 bar Compressed air: min. 7, max. 10 bar Length: 2 m Fodpfjvcqwgex Ad Nepg Width: 2,4 m Height: 2,5 m Weight: 4000 kg Operation / Control: Siemens Simatic S5 Features: Saturation Tank (d = 750 mm) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils