Used Neff Broaching Machine Broaching Press Neff for sale (68,806)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock Lrjdpfxjw H Dgno Aa Rsr - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: good (used), Schuler PE4s 50/800 high-speed press  Manufacturer: Schuler   Type: PE4s 50/800 High speed press 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Lsdpfxogryc Nj Aa Rsrr Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Brand and Model: URPE M200 Lodjzq R Tgspfx Aa Rjrr

Condition: used, Year of construction: 1972, pulling force - max. 6 t Ledpfjyif Nlox Aa Rjrr max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 60213/674, input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, -WAG 893- For sale is a Rausch RS6/1000 internal demolition machine. Manufacturer: Rausch Type: RS6/1000 Year of manufacture: 10/1987 Machine no.: 60213/674 Lrodpszvwlysfx Aa Ror Weight: approx. 800 kg Tractive force: 60 kN Further information will be added shortly...

Condition: excellent (used), Type: U3E1000 Lrsdpfx Aaszvq Axo Ror Machine no.: 17098 Year of manufacture: 1982 Data: Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: ready for operation (used), Year of construction: 2008, A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible. Lrodpsxph Sdsfx Aa Ror

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg Lrjdpoyvvkwefx Aa Ror In very good condition

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m Lodsy Ty Afepfx Aa Rorr

Condition: ready for operation (used), Vertical – Rausch Milling Machine Type RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal milling: largest workpiece diameter 600 mm External milling: area of the clamping plate 600 x 340 mm Coolant system Traction force measuring device Central lubrication, automatic Spindle protection with coil spring spirals Chip conveyor Cycle counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping by freight forwarder. We will gladly assist you in organizing cost-effective shipping. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Ljdpfx Aajdyp Rme Rerr The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. The machines and tools are sold as is. The assembly and electrical connection of the machine/device must be carried out or checked by a qualified specialist. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Lrodpfx Aozt H U Ssa Rjr Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: used, functionality: fully functional, Arthur Klink Snowplow Ljdpfx Aszfg A Toa Rerr Accessories: - Various plow blades The machine is fully functional.

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) Lodpozd Rhkjfx Aa Rjrr (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, TECHNICAL DETAILS - max. force : 63 [kN] - broaching stroke : 1000 [mm] - spindle stroke : 400 [mm] Ljdpfx Aaoug U H Us Rorr - 3 cutting feeds : 2,5 - 5 - 7,5 [m/min] - return speed : 24 [m/min] - broaching positions : 1 - hydraulic motor : 9 [kW] - capacity of hydraulic tank : 600 [l] - capacity of cooling tank : 150 [l] - main voltage : 400 [V] - total power : 10,5 [kW] - floor space : 3.700 x 3.000 [mm] - total height : 3.200 [mm] - weight : 3.500 [kg]

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Ledpjup Uzfefx Aa Rorr Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Ledpju R Sxxefx Aa Rsrr Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread Lsdpfxowki Ape Aa Rorr - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Lrjdexwcvmspfx Aa Ror

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 290/02, functionality: fully functional, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW Lrodpfx Aaeyghhhj Rsr • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives Lredpfx Aaomck Rye Rjr - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Lrsdpfowbvmiex Aa Rjr Very good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive Lodpfx Aexpqy Dja Rsrr - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Ledov Rpnmspfx Aa Rorr Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW weight of the machine ca. 4,2 t Ledpfsycxlcox Aa Rsrr

Condition: good (used), functionality: fully functional, machine/vehicle number: 15551, Heidelberg cylinder press, model SBG, standard accessories, working size 56 x 77 cm, 2 chase frames, converted for die-cutting. Lrsdpfx Aasyylrlj Rsr