Used Oil Separator for sale (11,860)

Year of construction: 2022, operating hours: 2,896 h, condition: reconditioned (used), functionality: fully functional, Model: Lepton 2100 Year of Manufacture: 2022 Screening Hours: approx. 2896 hrs Engine Hours: approx. 3486 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 2100 with Screen Deck 1 (optionally upgradable to a second screen deck) Screen Deck 1 spacing: 70 mm - Tracked undercarriage - Pre-screen deck with long hopper and accelerator belt - Radio remote control for all key adjustments - Diesel-electric drive 80 kW - Level compensation - 18,500 kg total weight Hodpfowlt N Njx Aaiefk - Transport dimensions: 11.97 m overall length, 4.10 m height, 2.53 m width Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recycling materials (not suitable for construction debris or excavated earth) Other: Very good used condition, fully operational

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 600 kg, New separator bucket with 4 rollers Ideal for excavators from 7 tons upwards. Hfsdpfx Aozltd Djaiek

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please provide your volumetric flow rate, and we will select the right cyclone for you. Various designs available: Hfsdpfx Aajftb Ebjijk - Legs made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hoods, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry. Below, you can select the cyclone with the appropriate size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. Hjdpfx Aozcg Hzjaijfk We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, overall weight: 250 kg, input voltage: 380 V, Weishaupt WM-L30/1 R oil burner, power 800-3100 kW, manufactured in 2016. Burner power control: power continuously adjustable. Hodpfx Aozcg D Tjaijfk Fuel type: fuel oil. Burner power range: 800-3100 kW. WFM 100 controller with power regulator (LMV 51.100C2). 7.5 kW/380V electric motor. CE certificate + complete burner documentation (operating manual and burner wiring diagram). QRB 1 photocell. Burner is 100% complete and has been serviced. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee the proper functioning of the burners we sell. We also have other burners and spare parts (new and used) for sale. Information available upon request.

Year of construction: 2008, condition: as good as new (ex-display), 3 units, rectangular, insulated steel tanks mounted on double T-rails, with cooling/heating capabilities, manufactured in 2008 – used – (formerly palm oil storage tanks) Capacity approx. 45,400 liters Length approx. 12,000 mm Width approx. 2,400 mm Height approx. 2,900 mm Hjdjd Tmcvspfx Aaiefk On the tank roof: 1 manhole DN 600 1 socket 2“ 1 socket 3“ 1 outlet flange DN 160 1 socket ½“ Inlet and outlet for heating coil 2“ At the end face: 1 filling pipe DN 80 Insulation: 80 mm mineral wool Otherwise, see drawing + photos.

Condition: refurbished (used), functionality: fully functional, SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Technical specifications: Hjdpfxsw Dcrks Aaijfk Manufacturer: Sepamatic Model: SEPA 2000T Mesh size: 5 mm Power: 11 kW Power supply: 400V, 50Hz Power consumption: 22A Control voltage: 24V Electrical diagram: No. 0695030 B Made in Germany Dimensions: Length: 165 cm Width: 150 cm Height: 200 cm Application: The SEPA 2000T separator is ideal for processing poultry, pork, and beef. Thanks to its 5 mm mesh, it allows for high-quality separation of raw materials while maintaining high efficiency. Why choose the SEPA 2000T? Robust construction High separation efficiency Easy operation and maintenance Compact dimensions ideal for production lines

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Hfodsigruyspfx Aaijk

Condition: used, - Type: Professional deck oven Hjdpozhk Rmjfx Aaisfk - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled Hodpfxsziawrj Aaijfk - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Hedpfowgca Tsx Aaijfk Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Condition: used, Year of construction: 2009, Overview  Hjdpfx Aaeyb Th Aeiefk This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Hsdpfxsht Hgns Aaiofk

Condition: good (used), Description Articulated conveyor belt from Frasch with an attached separating screw for separating sprues and parts. FS add-on separator Features: Separation of parts with small size differences Drive via the conveyor Precise adjustment of the sliding plate via threaded spindle Lever-free discharge side Safety slip clutch Robust design FS500 left (separator) Conveyor belt length: 1,300 mm Conveyor belt width: 300 mm Overall length: 2,500 mm Overall width: Hedjziwqcepfx Aaijfk 600 mm Overall height: 1,200 mm Total weight: 80 kg Input voltage: 400 V Input frequency: 50 Hz

Condition: good (used), We offer you steel tanks for storing almost all common liquid media. We have all available sizes, from 1,000 liters to 100,000 liters, constantly in stock. No matter how you want your tank to be equipped, we will implement your wishes and comply with official regulations at fair prices. Whether it's an inner lining, 2-component epoxy coating, exterior paint, installation or modification of fittings, DEKRA inspection, loading, and transport – we are the right partner for you. Hedpfx Aogx E Uhjaiofk

Condition: good (used), 50,000 liter tank, double-walled, cleaned, degassed Hfedjq U Slrjpfx Aaiok - Cleaning protocol available - Special size - short design (8.15 m long, 2.90 m diameter, 10.5 t) - with ladder - with platform - Attachments (ventilation, limit value sensor, dipstick, leak detector) - good condition - ready for immediate use... Transportation can be offered as an option. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: good (used), Tricool Thermal oil heater Model: SHK509A Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile Hoderwz N Ispfx Aaisfk

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) Hodpfx Aaowhfgroiofk - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. Hfedpswhfqwjfx Aaijk - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: used, REDA RE 50 Cream Separator The REDA RE 50 Cream Separator is a high-performance dairy processing machine designed to efficiently separate cream from milk. Built with advanced technology, this separator ensures superior cream quality while maximizing yield. Key Features: - Capacity: Designed for high volume, the RE 50 can process large quantities of milk, making it ideal for both small-scale and industrial dairy operations. - Efficiency: The separator operates with minimal energy consumption, ensuring cost-effective processing. Hfodpozfgbcjfx Aaiek - Durability: Constructed from high-quality stainless steel, the machine offers outstanding resistance to corrosion and wear, ensuring a long service life. - Easy Maintenance: With a user-friendly design, the RE 50 is easy to operate and maintain, saving valuable time for dairy processors. - Adjustable Settings:Users can customize the separation process to achieve the desired cream consistency and quality. The REDA RE 50 Cream Separator stands out in the market for its reliability, efficiency, and exceptional performance. It is the perfect choice for dairy farmers and processors looking to enhance their cream production. Capacity Skimming : 5000 Litres/ Hour Clarification: 7500 Litres/Hour Cream Skimming: 0.03% Tools: Included Control Panel: Included Water System and Pump: Included Base Plate: Included CIP: Yes Type: Automatic Cleaning Manuals: Included Export Packing: Included

Condition: used, Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine Hfjdpfx Ajiqlkmsaisk -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece Hfsdpsb A Hzxsfx Aaiok -Weight: 60 kg/piece

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Flow rate: 1 to 10 l/min Hodpfsw A Nddjx Aaiofk -Motor: Hanning 0.55 kW -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: good (used), Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger Hfsdpei En Dqsfx Aaisk -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Condition: good (used), Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Magnetic filter -for: hydraulic and other oils -electrical control Hedpfx Aoctvqieaiofk -Dimensions: 820/420/H1030 mm -Weight: 70 kg