Used Cnc Gfm Sx-13 for sale (18,788)

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Gsdpfeq U R T Nsx Ahtebr Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Gjdpfeq U R Rujx Ahtsbr Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Gsdpsq U Sa Sefx Ahtjbr Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: used, CNC pull studs, tool holder, tool holder, milling holder, milling tool Gbedpfx Ahob Hbxleter -Number: 13 pieces -with: ring groove -for: SK40 holders -Thread: M10 -Price: complete -Weight: 0.3 kg

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm Gbedpjw Iu Nhofx Ahtjr B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Gbedpszc D E Ijfx Ahtjr Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Gjdpfx Aew Nmw Hshtebr Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: used, Year of construction: 2002, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm Gbedpfjyqvqrjx Ahtor z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Godoy H Dahopfx Ahtebr Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 Hub/min oil volume 310 ltr. cutting angle 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 12200 kg range L-W-H ca. 4100 x 2300 x 2235 mm ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: Gedpfsxaa U Sex Ahtebr - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting Gsdjxabikspfx Ahtsbr - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° throat 350 mm table height 900 mm total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) Godpfxoxaadas Ahtobr - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: new, Year of construction: 2026, Working area: X - 2100mm, Y - 3000mm Z axis clearance: 300mm Gbsdpjzr D Nwsfx Ahtjr Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 6 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker VTLF 2.250 vacuum pump Drive: Full Leadshine AC servo drives with 1500W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 30mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Machine dimensions: 4835 x 2900 x 2205mm

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 300 mm, workpiece height (max.): 300 mm, table length: 2,500 mm, table width: 1,300 mm, We are offering this well-maintained CNC-STEP T-REX N-1325 CNC portal milling machine, manufactured in 2022. Manufacturer: CNC-STEP Model: T-REX N-1325 Year of manufacture: 2022 Condition: good Travel range: 1300x2500mm Z-axis clearance: 300mm Milling motor: HQD spindle, Model GDF46-18Z/3.5 3.5KW, max. speed 18000 rpm Vacuum pump with 5.5KW power The milling machine operates smoothly and without any errors. A complete set of ER25 collets (3-16mm) is included. Mobile tool length sensor This year, the control PC was replaced because the old one could not be upgraded from Windows 10 to Windows 11. Gsdszkp A Hspfx Ahtobr Dust extraction shoe, 3D printed. The original dust extraction shoe unfortunately broke several times, but it can be purchased from CNC-Step. Available from July 27, 2026. Inspection is welcome at any time. Shipping from warehouse, free loading.

Condition: used, overall weight: 495,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Maximum diameter of forging: - circular cross section: Ø 400 mm Gbjdev D Ddvjpfx Ahtjr - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Min length: 1500 mm Max length: 3000 mm Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Condition: good (used), * Machine length: ~ 19600 mm * Machine width: ~ 6200 mm * Machine height: ~ 2500 mm * Max weight of roll: 50 T * Roll length: max 13000 mm * Roll diameter: max 2000 mm Gbodpfxjud R Sze Ahtsr * Grinding spindle speed: 450 – 1800 rpm * Cutting speed: 10 – 45 m/s * Adjustment distance: ~ 13900 mm Machine delivered new in 1986, upgraded in 2014 including new Siemens controls.

Condition: used, Harrison Alpha 1350XS CNC Toolroom Lathe (2010) Swing Over Bed 350 mm Swing Over Cross Slide 196 mm Swing in Gap 535 mm Distance Between Centres 650 mm Maximum Turning Diameter 350 mm Gbsdpfx Ahezq Ddxotsr Spindle Speed Range 1 – 3,500 rpm Fanuc Oi-TD CNC control Harrison Alpha conversational programming Fanuc Manual Guide i Full ISO G-code programming capability 2-axis CNC control (X and Z) Electronic handwheel operation Machine Weight Approx. 1,800 kg Machine Dimensions (L × W × H) 2,400 × 1,700 × 1,500 mm

Condition: used, Other GARANT MM1300 CNC Gbsdpfxjx Tvi Us Ahtsr

Condition: used, Year of construction: 2022, total length: 19,760 mm, - Arbeitshöhe max. 43,15m - Plattformhöhe max. 41,15m - Seitliche Reichweite max. 27,43m - Reichweite unter Nullniveau 6,00m - Tragfähigkeit – unbegrenzt 300 kg - Tragfähigkeit – begrenzt 454 kg - Max. Personen auf der Plattform (begr./unbegr. Reichw.) 3/2 - Plattformschwenkbereich 160° - Länge Korbarm 5,48/9,14m - Vertikaler Korbarm-Schwenkbereich 130° - Oberwagen-Schwenkbereich 360° - Seitlicher Überhang (Achsen eingefahren) 1,14m - Seitlicher Überhang (Achsen ausgefahren) 1,70m - Fahrgeschwindigkeit – eingefahren 4,3 km/h - Fahrgeschwindigkeit – angehoben 0,65 km/h - Steigfähigkeit – eingefahren(2) 35% - Neigungssensor-Aktivierung (Längsachse/Querachse) 4,5° / 4,5° - Wenderadius – innen/außen (Achsen eingefahren) 8,03m/ 9,96m - Wenderadius – innen/außen (Achsen ausgefahren) 2,90m/ 6,17m - Reifen 445D50/710 - Antriebsart Diesel - Hydrauliktankinhalt 227 L - Kraftstofftankinhalt 151 L Gbodpfx Aezttb Eohter - Geräusch-/Schalldruckpegel (Boden) 91 dBA - Geräusch-/Schalldruckpegel (Plattform) 75 dBA - Vibrationen < 2,5m/s - Reifenkontaktdruck 896 kPa

Condition: used, Year of construction: 2025, total length: 20,590 mm, - Arbeitshöhe max. 43,15m Gedpfx Ahozttbretebr - Plattformhöhe max. 41,15m - Seitliche Reichweite max. 27,43m - Reichweite unter Nullniveau 6,00m - Tragfähigkeit – unbegrenzt 300 kg - Tragfähigkeit – begrenzt 454 kg - Max. Personen auf der Plattform (begr./unbegr. Reichw.) 3/2 - Plattformschwenkbereich 160° - Länge Korbarm 5,48/9,14m - Vertikaler Korbarm-Schwenkbereich 130° - Oberwagen-Schwenkbereich 360° - Seitlicher Überhang (Achsen eingefahren) 1,14m - Seitlicher Überhang (Achsen ausgefahren) 1,70m - Fahrgeschwindigkeit – eingefahren 4,3 km/h - Fahrgeschwindigkeit – angehoben 0,65 km/h - Steigfähigkeit – eingefahren(2) 35% - Neigungssensor-Aktivierung (Längsachse/Querachse) 4,5° / 4,5° - Wenderadius – innen/außen (Achsen eingefahren) 8,03m/ 9,96m - Wenderadius – innen/außen (Achsen ausgefahren) 2,90m/ 6,17m - Reifen 445D50/710 - Antriebsart Diesel - Hydrauliktankinhalt 227 L - Kraftstofftankinhalt 151 L - Geräusch-/Schalldruckpegel (Boden) 91 dBA - Geräusch-/Schalldruckpegel (Plattform) 75 dBA - Vibrationen < 2,5m/s - Reifenkontaktdruck 896 kPa

Condition: used, Year of construction: 2025, total length: 20,590 mm, - Arbeitshöhe max. 43,15m - Plattformhöhe max. 41,15m - Seitliche Reichweite max. 27,43m - Reichweite unter Nullniveau 6,00m - Tragfähigkeit – unbegrenzt 300 kg - Tragfähigkeit – begrenzt 454 kg - Max. Personen auf der Plattform (begr./unbegr. Reichw.) 3/2 - Plattformschwenkbereich 160° - Länge Korbarm 5,48/9,14m - Vertikaler Korbarm-Schwenkbereich 130° - Oberwagen-Schwenkbereich 360° - Seitlicher Überhang (Achsen eingefahren) 1,14m - Seitlicher Überhang (Achsen ausgefahren) 1,70m - Fahrgeschwindigkeit – eingefahren 4,3 km/h - Fahrgeschwindigkeit – angehoben 0,65 km/h - Steigfähigkeit – eingefahren(2) 35% - Neigungssensor-Aktivierung (Längsachse/Querachse) 4,5° / 4,5° - Wenderadius – innen/außen (Achsen eingefahren) 8,03m/ 9,96m - Wenderadius – innen/außen (Achsen ausgefahren) 2,90m/ 6,17m - Reifen 445D50/710 - Antriebsart Diesel - Hydrauliktankinhalt 227 L - Kraftstofftankinhalt 151 L - Geräusch-/Schalldruckpegel (Boden) 91 dBA - Geräusch-/Schalldruckpegel (Plattform) 75 dBA - Vibrationen < 2,5m/s Gsdszttazjpfx Ahtsbr - Reifenkontaktdruck 896 kPa

Condition: refurbished (used), functionality: fully functional, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed length W-axis: 800 mm, workpiece weight (max.): 12,000 kg, spindle stroke: 800 mm, year of last overhaul: 2025, Equipment: documentation/manual, WHN13-CNC, OVERHAUL 2025 | 3.0996 Gbedeztqyfjpfx Ahtor ■ HORIZONTAL BORING MILL – T-TYPE ■ PRODUCER: TOS VARNSDORF ■ OVERHAUL YEAR: 2025 RETOS ■ CONDITION: AFTER OVERHAUL ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN TNC 640 control system ■ Handwheel HR510 ■ HEIDENHAIN drives and SIEMENS motors ■ Ready for cooling through spindle axis and automatic tool changer ■ Can be equipped with other optional accessories - delivery on request

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor Gjdpfxoy Au Eas Ahtsbr - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions! Godpfxszpwd Nj Ahtebr

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 350 mm, turning diameter: 360 mm, spindle motor power: 5,500 W, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,000 mm, total length: 2,280 mm, total width: 1,700 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Special Offer – 5% Off! MTP CK6132 CNC 320 LATHE – SIEMENS 828D The MTP CK6132 CNC 320 is a compact and versatile lathe designed for the precise machining of metal components. It performs cylindrical, tapered, internal and external turning, as well as threading, facing, grooving and parting operations. The machine is equipped with an industrial Siemens 828D CNC control featuring a multilingual user interface configured according to the customer’s requirements. The control supports shop-floor and conversational programming as well as 3D machining simulation. It simplifies program preparation, process monitoring and daily operation. The solid cast-iron bed provides stability, vibration resistance and high repeatability. A fully enclosed working area, coolant system, automatic lubrication and working light improve operator safety and comfort. KEY FEATURES Siemens 828D CNC control Multilingual interface configured to customer requirements Shop-floor and conversational programming 3D machining simulation 160 mm hydraulic three-jaw chuck Six-position tool turret Automatic tool-setting probe Automatic central lubrication system Tool coolant system Fully enclosed working area Working and warning lights TECHNICAL SPECIFICATIONS Maximum turning diameter over bed: 320 mm Maximum turning diameter over cross slide: 110 mm Chuck diameter: 160 mm Spindle bore: 48 mm Spindle nose: A2-5 Maximum spindle speed: 3000 rpm Main motor power: 3.7 kW Tool turret: 6 positions X-axis travel: 350 mm Z-axis travel: 350 mm Rapid traverse X/Z: 8/10 m/min Tailstock quill taper: MT4 Tailstock quill travel: 100 mm Tailstock quill diameter: 52 mm Machine dimensions: 1600 x 1100 x 1680 mm Machine weight: 1000 kg TRANSPORT We arrange machine delivery throughout Europe. Transport costs are quoted individually according to the destination and specific shipping requirements. Collection from our warehouse in Sokołów Podlaski, Poland, is also available. Please contact our sales department for a transport quotation. Gbjdpfx Ajytrnrshter The MTP CK6132 CNC 320 is suitable for manufacturing plants, toolrooms, workshops, maintenance departments and technical training centres.