Used Profifeed Technologies Circular Saw For Light Metal & Aluminium for sale (75,905)

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: 53005011, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, operating pressure: 7 bar, The machine is partially functional; both motors run, and the electronics are in working order. It has not been used since 2019 and has only cut PVC. Both cutting heads are movable. A general overhaul is recommended. Ksdozli Ifspfx Ah Aedp

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade arbor: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles, horizontal 45°: 220 x 60 mm - Profiles, vertical 45°: 80 x 120 mm - Saw motor: 3.7/4.5 kW - Cutting speed: 1750/3500 m/min - Saw blade feed: 0 - 3700 mm/min - Rapid return of saw blade: 4500 mm/min Additional equipment: - Workpiece clamping with short-stroke clamping cylinder: stroke 8 mm - with hand crank for pre-setting - Machine completely overhauled and newly painted - Horizontal clamping cylinder at the front, per piece - Minimal lubrication instead of coolant mist spray device Ksdpfx Aey Dcu Eeh Aedp - Infeed roller conveyor T3 with rollers 60 x 289 mm - one starting section: 2000 mm, with 5 rollers, one foot, one mounting angle - one extension section: 2000 mm with 4 rollers, one foot, one guide roller, adjustable as a guide for material bars - Length measuring device including discharge roller conveyor T3 Note: the item must be picked up between July 7th and 9th, 2026, on a date to be determined. FCA D-73235 Weilheim Teck - loaded onto a truck

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Kjdox Rvb Sjpfx Ah Aedp Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1994, operating hours: 1,000 h, functionality: fully functional, saw blade diameter: 550 mm, cutting range round steel at 90°: 200 mm, type of input current: AC, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 1,000 kg, cutting diameter: 200 mm, Barely used aluminum circular saw with length measurement on the infeed conveyor. BRAND: ELUMATEC. DRIVE: VIA AIR COMPRESSOR. Saw blade diameter: 550. Kedpfx Ajzavzvjh Aodp Maximum cutting length: 200 mm at 90 degrees. Offer includes infeed conveyors and length measurement system. A stable loading device is available.

Condition: good (used), Year of construction: 2016, saw blade diameter: 600 mm, type of input current: three-phase, operating pressure: 8 bar, Industrial aluminum sawing machine that saws automatically, using pneumatic 2-button operation, and where the workpiece is clamped pneumatically on both sides. The clamping is adjustable both horizontally and vertically. Furthermore, this sawing machine is equipped with a mist lubrication system, which improves the sawing process. The saw blade feed is adjustable on this machine. Features: - Automatic sawing motion - Double pneumatic clamping - Saw blade moves from bottom to top Ksdpfx Aszf U Tmjh Asdp - Solid carbide saw blade - Adjustable sawing speed - Length stop - Lubrication and reduction system - Atomization system - Air gun - Miter sawing - Automatic sawing and manual sawing The machine is installed and delivered assembled. Testing is possible.

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Kdsdpfx Aozhkazsh Aep Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Ksdpfxowtr Iyo Ah Ajdp Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Kdsdpfszfn E Aex Ah Aep Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Kjdpeyyz Txjfx Ah Asdp Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed Kdodpfx Ahoyyz Ebj Aep - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control Ksdpfxeyyzxhj Ah Ajdp - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank Kodpfxsv R Dxas Ah Ajdp COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Kjdpfx Asy D Sywsh Aodp

Condition: used, Year of construction: 2021, machine/vehicle number: 210907, saw blade diameter: 600 mm, Tronzadoras mitre saw Automatic sawing cycle Manual safety cover Hydro-pneumatic saw feed Kjdpfx Aeyu Huvoh Ajdp Adjustable rear stop Saw blade diameter: 600 mm Cooling/lubrication system Angle adjustment: -22.5º to +135º

Condition: new, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, Crosscut Saw AS Saw blade diameter up to 1,000 mm. Powerful saw motors. Pneumatic material clamps. Two-hand safety operation. Coolant system. Protective cover. Optional with hydraulic saw feed and material clamp. Optional with length measuring system or automatic positioning system. Kjdpfx Ajyxln Rjh Aodp Version available as a saw-drilling or saw-punching automatic machine upon request.

Condition: used, Cold circular saw for light metal Saw blade 350 mm ø Cold circular saw for steel, Spontan Saw blade 225 mm ø, pneumatic saw feed, length stop 1,500 mm Cold circular saw for steel, Spontan Saw blade 225 mm ø, hydraulic feed 300 mm Kdedpfx Aoyl Nt Neh Asp Control unit defective

Condition: new, Year of construction: 2026, operating hours: 818 h, machine/vehicle number: S-MD 315, saw blade diameter: 315 mm, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 80 mm, sheet thickness aluminum (max.): 100 mm, total height: 100 mm, cutting range round steel at 45°: 80 mm, cutting height (max.): 315 mm, overall weight: 350 kg, input voltage: 380 V, year of last overhaul: 2026, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 100 mm, cutting diameter: 315 mm, saw blade bore: 32 mm, power: 380 kW (516.66 HP), Equipment: CE marking, PNEUMATIC DOUBLE VISE PROFILE AND METAL CUTTING MACHINE Kdjdey Aw Spepfx Ah Asp

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Kdjdpfx Ahomb U Tbs Ajp Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Kodpfxomb U Tfj Ah Aodp • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Kdodpfx Aomb U Tueh Asp • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture Kdjdpfx Ajf Eh D Ueh Aop • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 3 m Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. Ksdpfef Eh Hpsx Ah Aodp • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture Kdodpfx Asf Ekn Ieh Aep • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Kdjdel Sm Ndjpfx Ah Aep Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Ksdpfx Ahemdqwlj Asdp Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.