Used Altendorf for sale (109)

Condition: good (used), Duplex DD double mitre fence for Altendorf panel saws Modified for use on Altendorf panel saws with steel guide rail, from approx. year 1998 onwards. Cross-cutting up to approx. 1400 mm Digital display of angle and cutting length with automatic angle compensation eliminates the need for test cuts. The protective film shows minor damages that do not affect functionality or operation. Gedpfxew Nxu Ds Aa Ijtt Machine demonstrations can be arranged by appointment at our premises. We only offer machines that are ready for demonstration and in stock, see 'further offers from this supplier.'

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Gtedpfx Asw I Uxcoa Iet Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: GM010.0310, cutting length (max.): 3,300 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Gtjdpfxjw I Rtcj Aa Iet Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: excellent (used), Altendorf F45 Panel Saw Sliding table length: 3200 mm Gtjdpfx Aasxc Et Se Iot Cutting width to the right: 1300 mm Scoring unit Max cutting height: 120 mm Electric adjustment of saw blade tilt up to 45° Electric lifting and lowering of the worktable Main motor power: 5.5 kW Scoring motor: 0.75 kW Saw blade speed variable via belt: 3000/4000/5000 rpm Max saw blade diameter: 400 mm CE certificate

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Gtjdpfswrfmajx Aa Ijt Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: ready for operation (used), in very good condition. Gsdpowx Hw Hofx Aa Istt

Condition: good (used), Year of construction: 1988, Altendorf TKR 90 panel saw Year of manufacture 1988 Mach. No.: 88-11-153 Motor 11.0 KW / 400 Volt Cutting length 1400 mm Cutting width 1000 mm Max. saw blade Ø 450 mm Gtsdpfxsvxhilo Aa Ist Max. cutting height 155 mm Speeds 3000/5000 rpm Parallel protection device Table extension

Condition: used, Length of the rolling table ca. 2280 mm Saw blade diameter ca. 400 mm weight ca. 900 kg Parallel stop: Stop sliding table: 1550 mm with mitre rail incl. side stop extension to 1000 mm Star delta circuit has been renewed Gsdpfx Aaewzmvho Istt

Condition: ready for operation (used), Technical characteristics Carriage length : 3400 mm Motor 7,5 kW 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Incisor unit 0,75 kW Parallel guide with thin adjustments 1200 mm Tilting blade ⌀ 350 mm (max 450 mm without incisor unit) Automatic centralized lubrication for blade swivel Cutting height : 100 mm (max 150 mm with 450 mm blade) Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Laser visualization of the saw cut (ideal for edging) Gedpfx Aaeuciqmj Ijtt DUPLEX miter stop, adjustable by scale with extended stop rail (in option : Ref C2205) High quality machine, in very good condition. Power and Motors Pluging: Three-phased Motor: 10 CV Overall dimensions

Year of construction: 2023, condition: new, machine/vehicle number: 23-04-35-001, F 25 version 3 Manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Motor 5,5 kW, 2 speeds 3.600 / 4.200 rpm. Double roller carriage 3200 mm, rip fence incl. fine adjustment and DIGIT X Gedpfx Aajf A Ehts Istt (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting to length up to 3450 mm, scoring unit Basicwith LED light Saw blade diameter max 315 mm, saw blade projection max 104 mm, Cutting height max 100 mm, at 45° max 70 mm, large suction hood (PSV), incl. option front support roller, immediately available from stock Seevetal, subject to prior sale without transport, assembly and instruction

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Godpfxsipvrbe Aa Ijtt Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Gtsdewynhpjpfx Aa Iot Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: good (used), Manufacturer: Altendorf Model: WA 80 Gtodpew Hgkcjfx Aa Iot Electromotive extension and swiveling of the main saw 5.5 kW motor Double-guided chassis on steel guides (Altendorf patent), locking in end and middle position, length 3200 mm Undercutter 0.75 kW Cutting width up to the right parallel stop 1350 mm Parallel stop on the left side Disc diameter max. Ø 500 mm Table extension 840 mm

Condition: reconditioned (used), Year of construction: 2003, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Gedpfxewt A Ecs Aa Ijtt

Condition: ready for operation (used), Technical characteristics Carriage 3200 mm Blade Ø 400 mm Motor 5,5 kW Fixed blade Cutting height : 130 mm Rip fence 1200 mm with fine adjustment Ideal for carpentry Power and Motors Voltage: 380 V Pluging: Three-phased Power: 6 Kw Motor: 7,5 CV Gtsdpfsuciqyox Aa Iet Overall dimensions

Condition: used, Year of construction: 1992, Sawblade tiltable 45 ° Length of the rolling table 3800 mm Gjdpfxjwrtk Tj Aa Istt cutting width ca. 1250 mm Motor output 7,5 kW

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Gtjdpfor Eq Spox Aa Iot with scorer 350mm Upper intake guard Altendorf Automatic motor brake Weight approx. 1200 kg Technical data subject to change

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Gtedpfxev Uqa Eo Aa Iot Scoring unit WITHOUT miter stop

Condition: ready for operation (used), Technical characteristics 3200 mm carriage with double rollers Maximum blade diameter: 350 mm 45° hydraulic blade tilt Digital display of dimensions on console Overhead control panel Automatic movement of the rip fence to the required dimension Crosscut fence Double stop Motorised rip fence, length 1300 mm Gsdpoucip Nefx Aa Iott Fine adjustment of rip fence Main blade motor: 5.5 kW DUPLEX mitre fence, scale-adjustable with extended fence rail Power and Motors Voltage: 380 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- With her strong equipment she trumps herselfthe smallest space.- The cut quality and flexibility are excellentin daily hnical specifications:Sliding table length 2600 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45 ° max. 72 mmmanual height and swivel adjustment 0-45 °Cutting width 1000 mm, manually adjustableCutting to length at the crosscut-miter fenceup to 2600 mmExtraction connection top / bottom 50/100 mmWeight 550 kgWorking height 910 mm Gtsdpfx Aasvyd Dns Ist

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Godpfx Aaoipv Rle Istt Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg technical specification under subject

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Godpfxjwrb U Ts Aa Iott

Condition: ready for operation (used), Technical characteristics En cours de vérification Double roller carriage length: 3000 mm 5.5 kW motor 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Scoring unit 0.75 kW Parallel fence with fine adjustments 1200 mm Tilting blade ⌀ 350 mm (max 450 mm) Automatic centralized lubrication for blade pivoting Cutting height : 100 mm (max 150 mm with 450 mm blade) Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7 Kw Godpfjuciqaox Aa Ijtt Motor: 7,5 CV Overall dimensions

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Gedpfx Asvyurioa Iott

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Godpfx Aevzhdzoa Ijtt