Used Carl Zeiss Jena Microscope for sale (149)

Condition: excellent (used), Offered here is a "Large Oversight - Camera Microscope" from the company Zeiss of the type NEOPHOT 32. The camera microscope is in a very good condition and has several accessories. Technical data: Device dimensions: 1400mm x 800mm x 1200mm (W x D x H) Weight: 225kg Mains voltages: 100 V; 110 V; 127 V; 220 V; (factory setting) 240 V Mains frequencies: 50 Hz; 60 Hz Power consumption: 500 VA Application class: +10/+35/30/75 001.0 according to TGL 9200/03 Object focusing/ fast stroke Large drive: (45 ± 1)mm with stop for objectives with tuning length 45mm

 Fine drive: 4mm, scaling in 1µm intervals Fast stroke: approx. 45mm Stage load capacity: specimen mass ≤ 5kg. Cross stage (20x20mm): Coordinate movement 20x20mm with position indicator; 0.1mm scale. Rotation 360°, centerable; Nonien reading. Adjustable 45° detent Bzau3Iwpys Table insertion covers: 
 outer-ø 56mm :10, 20, 27mm inner-ø. 
outer-ø 96mm :32, 40mm inner-ø Cross table (50x50mm): Coordinate movement 50x50mm with nonien reading of table position, rotary insert. Table insertion covers: 

outer-ø 56mm :10, 20, 27mm inner-ø outer-ø 96mm :32, 40mm inner-ø outer-ø 132mm :50, 70, 90mm inner-ø nosepiece: M 30/5 EZ Tube systems: 8x; 10x; 12,5x; 16x(15x); 20x (each product of tube factor and eyepiece magnification) Projections: 6,3 : 1; 10 : 1 Magnification range 10x... 2000x (range adjustable) Imaging scales 6.3 : 1 ... 2000 : 1 Photo material formats: 9cm x 12cm as well as formats of the cassettes and film holders that can be placed on the international back.

Condition: good (used), Analog with electrical scanner. - Including several options. Length surface: approx. 990 mm Max height optics glass table (removable) approx. 200 mm (Only the device without the table) dimensions: L / B / H 110 x 115 x 80cm Hvctboql Weight: approx. 400 kg

Condition: used, Rotary swivel table Clamping surface 200 mm diameter Cmmqhbokxw

Condition: good (used), Year of construction: 2007, Air cushion trolley Load capacity.5000 kg. Dpgeed Made by Carl Zeiss Jena Transport area : Length 4000 mm Width: 2000 mm Max. load 5000 KG Tare weight : 2900 KG .

Condition: used, Year of construction: 1984, Center width: 550 mm, Center height: 150 mm, Spindle bore: 27 mm, Mechanic's lathe made by VEB CARL ZEISS JENA serial #607/84, year of manufacture 1984 Bof3Obdicgw Technical data: Center height 150 mm Rotation diameter over support 75 mm Center distance 550 mm Spindle bore 27 mm Thread pitches 0.35/ 0.5/ 0.75/ 1.0/ 1.5/ 2.0 Operating voltage/ control voltage 380 V, 220 V, 50 Hz Rated current of the fuse 25 A External dimensions L x W x H 1250 x 900 x 1350 mm Weight 674 kg With - base frame - Thread cutting device guide cartridge - Large rear wooden shelf 460 x 990 mm - without tailstock used, in good condition

Condition: used, CNC control, control panel, machining center, control device coordinate measuring machine -Manufacturer: Carl Zeiss, control panel control display controller 3D measuring machine -Type: BP26, Standard -Dimensions: 335/165/H155mm B7037Pstqk -Weight: 1.1 kg

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Measuring range X-axis: 3,000 mm, Measuring range Y-axis: 4,000 mm, Measuring range Z-axis: 2,000 mm, CNC 3D coordinate measuring machine Carl Zeiss MMZ G 30 40 20 Year of construction 2008 Zeiss CNC C99 control Measuring range: X 3,000 mm Y 4.000 mm Z 2,000 mm Measuring probe: VAST Gold Length measuring system Steel scales: 0.2 µm Collision protection for plunger Collision protection for measuring head Travel speeds: Setup mode: all axes 0 - 70 mm/sec. Batch measuring mode: X, max. 250 mm/sec. Y, max. 200 mm/sec. Z - max. 200 mm/sec. Vector: max. 370 mm/sec. Acceleration: all axis 200 mm/sec. Vector: max. 340 mm/sec. Space requirement: LxWxH, approx. 4,842 x 5,805 x 6,860 mm Measuring machine weight: approx. 16,100 kg Accessories: Czrqxoh7Ak Measuring probe VAST Gold Dynalog control panel + computer Collision protection for ram and VAST Gold probe and RDS. Guideway covers X, 2 x Y, Z Solution for the air cushion drive Condition: Very good. Offer number V-6913

Condition: used, The content of this advertisement is a complete 3D measuring system from Zeiss. We will be happy to answer all your questions. Scope of delivery: Measuring system: COMET L3D 2 5M - Measuring fields: 75, 100, 250 - Calibration plate CP_P_100 - Calibration plate CP_P_300 - Controller - Laptop Dell Precision M6800 - Pelicase Measuring table: COMET Rotary 100/400 Tripod: COMET L3D "ZEISS" tripod incl. 3-way head - incl. 3-way head - Horizontal arm length: 135 cm - Height: 234 cm - Weight: 169 kg Software: colin3D Full, dongle-bound Inspect Plus Bg3Fcl933Bu (We reserve the right to make changes and errors in the technical data and specifications!)

Condition: used, Machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Q3Syaoui9 Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, Measuring range X-axis: 900 mm, Measuring range Y-axis: 1,800 mm, Measuring range Z-axis: 800 mm, ZEISS CNC coordinate measuring machine ACCURA II Measuring range: X= 900 mm, Y= 1800 mm, Z= 800 mm Year of manufacture: 2011 Last calibration: 04/2021 Technically and optically in excellent condition Length measurement deviation according to ISO 10360-2 for VAST XT Gold/VAST Gold/ VAST XTR Gold: E0 = (1.9 + L/300)µm, PFTU = 1.9 µm Permissible measuring reference temperature (kept constant for 48 h) selectable from 20-26°C, + - 2 K Scanning performance according to ISO 10360-4 MPE_THP = 3.5 µm in 68 s Dofrjp Device features, equipment: Portal measuring device with fixed device table Glass ceramic scales C99 control unit with BP26_SE control panel VAST XT sensor system Multi Sensor Rack MSR 12-fold Automatic temperature compensation Calibration sphere HP workstation with monitor Software: Calypso Basic Options: Calypso QDAS Converter Upgrade and further options possible Exchange plate Various stylus accessories Further accessories Further options possible

Condition: like new (used), Year of construction: 2022, Measuring range X-axis: 500 mm, Measuring range Y-axis: 400 mm, Measuring range Z-axis: 300 mm, ZEISS O-INSPECT 5/4/3 CMM / Coordinate Measuring Machine - Optical + Tactile + DotScan Fully equipped : - 4th axis - probe changer - pallet carrier - 2nd programming station - etc. Make : ZEISS Type : O-INSPECT 5/4/3 Measuring range X = 500 mm Y = 400 mm Z = 300 mm Most important features : - Tactile measuring head VAST XXT TL3, 30-150 mm length - Optical measuring head ViScan Discovery.V12 standard 100 - DotScan head 3 mm - 4th axis RT-RB-10-1, max. 9 kg + chuck, on pallet - 3-fold changer with plates - Optical measurement with transmitted light - Calibration set / calibration templates - Temperature measurement with workpiece sensor - XENON workstation + offline workstation Bogadmgg8Oc - CALYPSO base, curve, STEP in/out, PCM, Planner, simulation, etc. The complete details can be provided on request Condition : The machine has never been used after commissioning and training in 8 / 2022 by the buyer. It is in absolutely mint condition.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Measuring range X-axis: 1,000 mm, Measuring range Y-axis: 1,200 mm, Measuring range Z-axis: 600 mm, Table height: 850 mm, Ambient temperature (min.): 18 °C, ZEISS CNC coordinate measuring machine CONTURA G2 1000 RDS/direct Measuring range: X = 1000 mm, Y = 1200 mm, Z = 600 mm Length measurement deviation according to ISO 10360-2 for RDS/direct VAST XXT: MPE_E = (1.9 + L/300)um, MPE_P = 1.9m for RDS with RST-P/TP 20/200: MPE_E = (2.8 + L/300)um, MPE_P = 2.6um Cwydwvyook Scanning performance according to ISO 10360-4 for RDS/direct VAST XXT: MPE_THP = 3.8 um in 68 s Device features, equipment: Gantry measuring device in ceramic technology with fixed device table Table height approx. 850 mm Integrated vibration damping PC-based scanning control (ISC) in external cabinet Cabling prepared for RDS multisensor technology and VAST XXT/direct Accessories: RDS probe system Passive scanning sensor system RDS ViScan camera system Calibration sphere Multi sensor rack Probe change magazine Single storage system for RDS magazine PC system Zeiss Power Workstation (Win 10) with Calypso software

Condition: ready for operation (used), Functionality: limited functionality, Machine/vehicle number: 88143, Measuring range X-axis: 850 mm, Measuring range Y-axis: 1,200 mm, Measuring range Z-axis: 600 mm, 3D coordinate measuring machine Dpbulz Manufacturer Carl Zeiss Type: MC 850 Machine no.: 88143 Conditionally ready for use, i.e: There is a malfunction during the probe change process, especially if the probe weights vary greatly within a test plan. Technical data: Measuring range: X = 850 mm Y = 1200 mm Z = 600 mm Probe head: ST Measuring software: CALYPSO 5.6 Control 87 16bit AMS Equipment: 6-fold probe changing system Probe changing plate Probe accessories Calibration sphere: HP Workstation with monitor Documentation Optional with KMG Check additional accessories optionally also with external programming station CALYPSO 5.6

Condition: ready for operation (used), Machine/vehicle number: 608426-9151-000 / SN : 001JZNCN, Control PANEL / BP26_SE Standard. 608426-9151-000 Manufactured 10/2013 very nice condition, fully functional. Control panel . ZEISS . Bj7Sahlgano

Condition: good (used), Technical data Manufacturer: Carl Zeiss Type: SMC Control: C99 Measuring range and further data on request. The machine can be modernized with new accessories according to customer requirements. Dpkvex Price: on request! Installation and commissioning possible! We will be happy to provide you with a detailed quote. Note: Our offer is aimed exclusively at specialist customers. (Subject to changes and errors in technical data, specifications and prices and subject to prior sale)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Measuring range X-axis: 1,200 mm, Measuring range Y-axis: 1,800 mm, Measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Navigator VAST GOLD Year of manufacture: 2008 Retrofit 2019 Last calibration: 02/2023 Measuring range: X= 1200 mm, Y= 1800 mm, Z= 1000 mm Technically and optically in excellent condition Device features, equipment: C99 control unit with BP26_SE control panel O7Hfq0Ie VAST GOLD sensors 16-fold magazine button change Button change plate Probe accessories Automatic temperature compensation Calibration sphere HP workstation with monitor Calypso Basic software Options: Navigator, PCM, Step Converter, QDAS Converter and PiWeb Reporting Further accessories Further options possible

Condition: refurbished (used), Year of construction: 2020, Functionality: fully functional, Refurbished, tested, fully functional Carl Zeiss RDS-C-CAA head. Blbprtpw2Es !!! 9 months written warranty !!! Invoice Sale only for exchange !!!!

Condition: ready for operation (used), Year of construction: 1998, Measuring range X/Y/Z: 840mm/1200mm/600mm, software: Calypso, software version: 4.4.04.01. Including various accessories. In 2004 the machine was equipped with a new control cabinet. Documentation available. Boiwwfcwrhz

Condition: used, Machine/vehicle number: 78328, Description of the 3D coordinate measuring machine Manufacturer Carl Zeiss Type: UMC 850 Machine No.:78328 Conditionally ready for use, i.e: There is a fault during the probe change process. The placement of the probe works perfectly, but the probe can only be picked up manually. Technical data: Measuring range: X = 850 mm Y = 1800 mm Z = 600 mm Probe head: MT-HSS Measuring software: CALYPSO 5.6 including curve option Dpbuhd Control C98 16bit Equipment: 9-fold probe changing system Probe changing plate Probe accessories Calibration sphere: Dell workstation with monitor Documentation Further accessories Optionally with KMG Check optionally also with external programming station CALYPSO 5.6

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, Machine/vehicle number: 530008, Coordinate measuring machine with probe change system Optional external programming station can be purchased additionally TECHNICAL DETAILS Measuring range X / Y / Z: 700 / 1000 / 600 mm Probe head: VAST XT gold #001RHOPF Measuring software: CALYPSO 5.6 including curve option Control: C99 with control panel BP26_SE EQUIPMENT - 7-fold probe changing system - Push-button plate - Probe accessories - Calibration sphere: #G00559-b r=14.9999 HP - Workstation with monitor - Documentation Further accessories - OPTIONAL: with external programming station CALYPSO 5.6 Ccbr7Vk Last calibration 08/2023

Condition: used, Year of construction: 1992, Measuring range X-axis 2400 mm Pjupj Measuring range Y-axis 1200 mm Measuring range Z-axis 1500 mm Machine weight approx. 9,00 t

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Measuring range X-axis: 900 mm, Measuring range Y-axis: 1,500 mm, Measuring range Z-axis: 700 mm, Zeiss CNC coordinate measuring machine Prismo Navigator VAST GOLD Year of manufacture: 2007 Retrofit 2024 Last calibration 2021 Measuring range: X= 900 mm, Y= 1500 mm, Z= 700 mm Technically and optically in excellent condition Bojhpobnrec Device features, equipment: C99 control unit with control panel Automatic temperature compensation VAST GOLD sensor system Probe change magazine 12-fold Probe change plate Probe accessories Calibration ball HP workstation with monitor Calypso Basic 2019 software Calypso upgrade and other options possible Further accessories Further options possible

Condition: excellent (used), Year of construction: 2001, Measuring range X-axis: 400 mm, Measuring range Y-axis: 500 mm, Measuring range Z-axis: 350 mm, Workpiece weight (max.): 280 kg, Overall weight: 400 kg, Equipment: Documentation/Manual, Machine data: Machine: Zeiss Vista CNC year 2001 Measuring range in mm: X=400, Y=500, Z=350 Blnxio7Goss Length measurement deviation MPE according to DIN EN ISO 10360-2 for E in um: 2.4 + L/300 Probing deviation MPE according to DIN EN ISO 10360-2 for P in um: 2.2 Scales: Incident light system, photoelectric. Resolution 0.5 um Control: PC control 32bit Weight of the CMM in kg: 400 Maximum workpiece weight in kg: 280 Vibration: Passive vibration damping Data system: HP workstation with monitor Maintenance and care: Maintenance: Regular maintenance and calibrations have been carried out Condition: technically and visually in perfect condition with few operating hours Accessories: Technical documentation Calibration sphere: with certificate Various styli Machine can be tested on site. Location of the machine: 15831 Blankenfelde-Mahlow (south of Berlin)

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Measuring range X-axis: 900 mm, Measuring range Y-axis: 1,200 mm, Measuring range Z-axis: 700 mm, Zeiss CNC coordinate measuring machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Dpp7Jl Device features, equipment: C98 control unit with control panel RDS sensor system with RST Probe change magazine 5-fold RST 5x touch probe Probe accessories Calibration sphere Computer with monitor Software Calypso Basic 5.4 Loading system Further accessories Complete retrofit C99 and Calypso possible

Condition: like new (used), Year of construction: 2012, Functionality: fully functional, Measuring range X-axis: 500 mm, Measuring range Y-axis: 500 mm, Measuring range Z-axis: 500 mm, Measuring range: X=500mm, Y=500mm, Z=500mm Length measurement deviation E0 in µm E0/E40 in µm MPE according to ISO 10360-2:2009 2.4 + L/300 at 18°C - 22°C Isvjma3 Control unit C99 with control panel BP26_SE Equipment: Sensor VAST XXT Probe change magazine 6-fold Stylus changer plate 4 Calibration ball with certificate Machine folder, device documentation, operating instructions Various styli HP workstation and monitor Additional accessories Software: Calypso Basic CNC 2015 Calypso options: Curve, FreeForm Surface, PCM, DMIS, QDAS-Conv., Step, Iges, Parasolid, JT-Open..., PiWeb_reporting Upgrade to the current Calypso version possible