Used Zeiss Coordinate Measuring Machine for sale (114)

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Itodpfx Abow Titlj Hop Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm C99 control with operating panel VAST XT probe head Itjdpfx Aowyukdjb Hsp VAST GOLD probe head (optional) 13-position probe changer magazine Probe change rack Probe accessories Calibration sphere Technical documentation Additional accessories HP workstation with monitor Calypso Basic software, latest version Additional options available Available at short notice Delivery without the automatic feeder shown

Condition: excellent (used), Year of construction: 2023, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Zeiss Duramax Itodpsxt Ha Iofx Ab Hsp Year of manufacture: 2023 Travel distances: 500-500-500 mm Calypso basic + CNC + VAST Calypso preset BasLic, PC ATU for Calypso preset Entry-level workstation HP 24-inch monitor Bluetooth keyboard Standard base frame Calibration sphere RS D8-C for RSH systems Probe changer plate for VAST

Condition: good (used), - x-coordinate: 0 ... 250 mm - y-coordinate: 0 ... 125 mm - z-carriage with measuring head: 190 mm - max. height of measuring object: 170 mm - permissible mass of measuring object: 50 kg For all further technical data, please refer to the images starting from image 5. Isdpfjxr Ap Njx Ab Hstp

Condition: not inspected (used), functionality: unexamined, measuring range X-axis: 800 mm, measuring range Y-axis: 1,400 mm, measuring range Z-axis: 500 mm, table width: 1,170 mm, table length: 2,120 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Bidding obliges the buyer to collect the machine within the specified timeframe: from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 1,400 mm Travel Z-axis: 500 mm Worktable dimensions: 2,120 x 1,170 mm Magnetic chuck dimensions: 600 x 200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 2,400 x 3,500 mm Weight: 7,000 kg EQUIPMENT Magnetic clamping plate Workshop drawer cabinet with contents Various measuring tools (measuring pins and touch probe) Additional suitable accessories Itedpexqqkfofx Ab Hep

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm Itedpfsicnk Ejx Ab Hep The device is not functional! Chassis for sale,

Condition: excellent (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 88962, measuring range X-axis: 1,600 mm, measuring range Y-axis: 800 mm, Equipment: type plate available, Nice measuring machine. Itsdpfx Absxnylgj Hop

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, Zeiss CNC coordinate measuring machine Prismo MP5 Year of manufacture: 8/1999 Last calibration: 9/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Ijdpfeufgbnox Ab Hetp Features, Equipment: C98 control system with control panel RDS sensor system with RST 5-way probe change magazine RST 5x probe system Reference probe Probe accessories Calibration sphere Computer with monitor Calypso Basic 5.4 software Loading system Further accessories and options available Complete retrofit of the C99 and the current Calypso version possible Available at short notice

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Equipment: type plate available, ZEISS DURMAX MEASURING MACHINE WITH MEASUREMENT ROOM EQUIPMENT: 1. Granite table Isdsxqcx Ispfx Ab Hetp 2. Calipers from 250-750 mm 3. Micrometers 4. Measurement rods and gauges 5. Scales for components 6. Surface roughness tester 7. Rockwell hardness tester 8. Gloss meter 9. Stereoscopic microscope with camera

Year of construction: 2008, condition: excellent (used), ZEISS ACCURA 16.24.10 RDS-CAA Iedpsnp Hvuofx Ab Hotp X 1,600 / Y 2,400 / Z 1,000 RDS CAA touch probe with VAST XXT technology Stylus changing system 8 positions Control C99 Software on request - Calypso / HolosNT Warranty 12 months Installation, commissioning, acceptance according to DIN EN ISO 10360-2,4,5

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 1481 mm Measurements depth 1975 mm Measurements height 2797 mm Machine weight 1570kg Movement X-Axis Movement 700 Y-Axis Movement 1000 Z-Axis Movement 600 This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine. Application Types Itodpfx Aoxtgmbjb Hsp Measuring

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SK02UXKP0365, Almost unused 3D scanner Zeiss T-Scan Hawk. Includes laptop and GOM Inspect software. Itedexn Rurspfx Ab Hsp

Condition: used, Year of construction: 1988, Zeiss WMM 850 Year of manufacture: 1988 Completely overhauled by Zeiss in 2008 • I purchased the machine in 2008 fully overhauled by the manufacturer. It has seen little use since then. Itsdsxurcdspfx Ab Hep • The machine is not operational, as a defect in the motherboard of the PC prevents the software from being reinstalled. • Furthermore, the software is discontinued by Zeiss and must be replaced with a current version. • The price for new software including hardware and training is €29,100 (as of March 2024). This offer was tailored to my needs and is provided for informational purposes. • Since the machine has been used very little, there is virtually no wear on the bearings and drives. • A set of probes from the basic equipment is included; only a few of these have ever been used.

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Itodpsw D R Nqofx Ab Hjp Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: good (used), Year of construction: 2003, Technical Data Manufacturer: Zeiss Itedjxnru Hepfx Ab Hep Model: Carmet Year of manufacture: 2003 2 measuring arms Measuring plate Mounted grid plate Width: 3,100 mm Depth: 2,000 mm Accessories PC unit (FTSD0026) Joystick control 2 x 24" monitors, make Eizo Keyboard Mouse Price: on request! Note: Our offer is intended exclusively for professional clients. (Subject to change and errors in technical data, specifications and pricing, as well as prior sale!)

Condition: ready for operation (used), ZEISS Rondcom 54 Form Measuring Instrument – Surface and Contour Measuring Device Max. Measuring Diameter (OD): approx. 300 mm Max. Workpiece Diameter: approx. 580 mm (depending on configuration) Max. Workpiece Load: approx. 30 kg Rotational Axis (C-axis) – Radial Roundness: 0.020 + 6 H / 10,000 µm (tolerance) Axial Runout: 0.020 + 4 R / 10,000 µm Measuring Speed (Rotation): approx. 2 – 10 rpm Centering Range: ± 2 mm Leveling / Tilting Range: ± 1° Resolution (Rotary Axis): 0.025° Z-Axis (Vertical Travel): 300 mm (optionally expandable to 500 mm) Straightness Deviation Z-Axis: 0.12 µm / 100 mm, 0.20 µm / 300 mm Parallelism Deviation (relative to rotary axis): 0.8 µm / 300 mm R-Axis (Radial Movement) – Travel: 170 mm Straightness Deviation R-Axis: 0.8 µm / 150 mm Parallelism Deviation (C vs. R): 1 µm / 150 mm Linear Scale (on R-Axis): Yes, available as standard (for higher accuracy) Measuring Force (stylus / probe): adjustable, 30 – 100 mN Measuring Range (probe): ± 1000 µm (adjustable) Detector Resolution: up to 0.001 µm (1 nm) Standard Stylus: Length L = 54 mm, Ball Ø = 1.6 mm carbide Power Supply: 100 – 240 V AC, 50/60 Hz Itsdpfoxhd E Dex Ab Hop Power Consumption: approx. 600 VA Compressed Air Requirement: 0.3 – 0.7 MPa Weight (approx.): approx. 170 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Export customers can be issued a net invoice, provided a valid VAT ID number is supplied. Sale subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks are property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in item descriptions are subject to change.

Condition: like new (used), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, Machine description: ZEISS CNC coordinate measuring machine (CMM) in portal design - Measuring volume X = 1000 mm, Y = 1200 mm, Z = 600 mm - Table height TH = 850 mm (standard) - Prepared for tactile active sensors - VAST navigator measuring technology (tactile active scanning) ONLY 50 OPERATING HOURS – THEREFORE AS NEW EQUIPMENT ACCORDING TO ORDER CONFIRMATION – SEE ATTACHED PDF FILE Ijdpjw H Rfdofx Ab Hjtp

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo 7 MPS VAST Gold with rotary table Year of manufacture: 1999 Itsdpfx Abew Az Syo Hep Retrofit: 2019 Last calibration: 06/2021 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Control: C98 with operating panel Measuring head: VAST Gold 7-position probe changer magazine Probe changing plate Probe accessories Calibration sphere Technical documentation Additional accessories Workstation with monitor Software: Calypso Basic Further options available upon request

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm Itedpfx Aoxuq Tujb Hjp • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: used, Year of construction: 1997, Measuring Machine Zeiss Prismo7, Year 1997, Completely Refurbished in 2024 ZEISS Prismo7 CNC – COMPLETELY REFURBISHED!! USED MACHINE Made in Germany Year of manufacture: 1997, modernized in 2024 with new control system, new probe system, and new user-friendly measuring software. Measuring volume: 1,500 x 900 x 700 mm Measurement accuracy according to ISO 10360-2: MPEe=(1.9+L/450)μm, MPEp=1.9μm Including base frame with integrated active vibration damping. Covered auxiliary support guide with additional scale to increase measuring accuracy. The scope of delivery also includes the following accessories: 1. Motorized rotary/swivel head PH10T Plus by Renishaw and interchangeable probe TP200 by Renishaw 2. Probe change magazine TW200. In total, 2 TP200 Standardforce probe modules are included. 3. Measuring software ThomControl CNC Basic Geometry. All geometric elements can be measured, graphically displayed, and documented. Evaluation of all form and positional tolerances. ISO tolerance database is integrated. Measurement programs can be created via teach-in. CNC measuring strategies are graphically displayed. 4. The MCU-Lite2 one-hand joystick from Renishaw features stepless speed control, emergency stop, and freely assignable function keys. 5. CNC control unit UCC2-2 Plus by Renishaw, housed in a separate control cabinet. 6. Powerful DELL PC with 8 GB RAM, 500 GB HDD, 2GB graphics card, WINDOWS 11 Professional 64-bit, sound card, network connection, 24" TFT monitor, including 3-year on-site service and an "ALL IN ONE" HP color printer. Itsdow D Skiepfx Ab Hep 7. Calibration sphere Ø25. 8. M2 stylus kit, 10 pieces.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 149616, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 2,500 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Model: Pro T Compact S/N: 149616 Year of manufacture: 2008 2 measuring arms Measuring table Width: 3,000 mm Depth: 6,000 mm Travel ranges Iedpfx Abexnrumo Hotp Y-axis: 1,600 mm Z-axis: 2,500 mm Equipment 2 x control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo 2 x keyboard 2 x mouse Misc. accessories Price: on request! Note: Our offer is directed exclusively at professional customers. (Modifications and errors in the technical data, information and prices as well as prior sale remain reserved!)

Condition: used, Year of construction: 1998, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, For sale Prismo 7 Vast - controller Zeiss C98 - software Zeiss Calypso ver 5.4 (Basic + IGES import option) Iedew Rm E Hspfx Ab Hstp - probe changer - reference sphere Possible extras : installation with maintenance and acceptance tests, Calypos training

Condition: used, Year of construction: 1997, Measuring Machine Zeiss Prismo7, Year 1997, Completely Refurbished in 2024 ZEISS Prismo7 CNC – COMPLETELY REFURBISHED!! USED MACHINE Made in Germany Year of manufacture: 1997, modernized in 2024 with new control system, new probe system, and new user-friendly measuring software. Measuring volume: 1,500 x 900 x 700 mm Measurement accuracy according to ISO 10360-2: MPEe=(1.9+L/450)μm, MPEp=1.9μm Including base frame with integrated active vibration damping. Iedpexuravefx Ab Hetp Covered auxiliary support guide with additional scale to increase measuring accuracy. The scope of delivery also includes the following accessories: 1. Motorized rotary/swivel head PH10T Plus by Renishaw and interchangeable probe TP200 by Renishaw 2. Probe change magazine TW200. In total, 2 TP200 Standardforce probe modules are included. 3. Measuring software ThomControl CNC Basic Geometry. All geometric elements can be measured, graphically displayed, and documented. Evaluation of all form and positional tolerances. ISO tolerance database is integrated. Measurement programs can be created via teach-in. CNC measuring strategies are graphically displayed. 4. The MCU-Lite2 one-hand joystick from Renishaw features stepless speed control, emergency stop, and freely assignable function keys. 5. CNC control unit UCC2-2 Plus by Renishaw, housed in a separate control cabinet. 6. Powerful DELL PC with 8 GB RAM, 500 GB HDD, 2GB graphics card, WINDOWS 11 Professional 64-bit, sound card, network connection, 24" TFT monitor, including 3-year on-site service and an "ALL IN ONE" HP color printer. 7. Calibration sphere Ø25. 8. M2 stylus kit, 10 pieces.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 158750, measuring range X-axis: 5,000 mm, measuring range Y-axis: 2,600 mm, measuring range Z-axis: 2,100 mm, Technical Data Manufacturer: Zeiss Model: Carmet II Duplex Serial No.: 158750; 157854 Year of manufacture: 2012 Itodpfsxnrugsx Ab Hep 2 measuring arms Measuring plate Centrally installed grid/adapter plate Width: 2,600 mm Depth: 4,800 mm Platform installation Measuring range X-axis: 5,000 mm Y-axis: 2,600 mm Z-axis: 2,100 mm Accessories 2 control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo 2 keyboards 2 mice Price: on request! Note: Our offer is addressed exclusively to professional customers. (Subject to changes and errors in technical data, information and pricing as well as prior sale!)

Condition: used, Year of construction: 2007, machine/vehicle number: 134418, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Type: Accura 12/18/10 Isdpfx Aexnruasb Hjtp S/N: 13418 Year of manufacture: 2007 Measuring Plate Hard stone measuring plate Width: 2,400 mm Depth: 1,700 mm Height: 400 mm Measuring Range X-axis: 1,200 mm Y-axis: 1,800 mm Z-axis: 1,000 mm Accessories Control panel PC unit 2 x 27" monitors, brand BenQ Keyboard Mouse Accessories Stored in a two-door metal cabinet Price: on request! Note: Our offer is aimed exclusively at professional customers. (Subject to change and error in technical data, details and prices as well as prior sale!)