Used Doosan Excavator for sale (261)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 520 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 579 mm, spindle motor power: 18,500 W, total height: 1,700 mm, total length: 3,000 mm, total width: 1,600 mm, overall weight: 4,500 kg, chuck outer diameter: 250 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller model: FANUC 18i-TB, Equipment: documentation/manual, CNC turning center with FANUC 18i-TB control. Main spindle with 10" chuck, equiped with subspindle and Live tool (C-axis) max turning diameter ~13.8" (350 mm), max turning length ~20.5" (520 mm), bar capacity ~3.0" (76 mm), and spindle bore ~4.0" (102 mm). Nedpeyywufsfx Aqxedc

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015 Operating hours: 7.480 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Nsdpfx Ajzb I U Dsqxodc Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2017 Nsdpezb Nahsfx Aqxjdc Operating hours: 8.000

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 5,461 h, load capacity: 9,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: duplex, construction height: 3,935 mm, power: 81 kW (110.13 HP), fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Duplex Ndjdpfx Ae Aauchoqxec Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, air conditioning, LED, radio, reversing camera

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, Nedjzhwg Uepfx Aqxjdc ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Ndjdpfx Aozpw Dpeqxoc Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: ML0336-000164, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 51 mm, controller model: Siemens S828D, TECHNICAL DETAILS Main spindle speed: max. 6,000 rpm Travel in X-axis: 205 mm Travel in Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 36 m/min Swinging diameter over bed / turret: 600 / 400 mm Torque: 127 Nm Hydraulic 3-jaw chuck: 170 mm Workpiece size: max. Ø 300 × 510 mm Bar diameter: max. 51 mm Chuck outer diameter: 152 mm Tool stations: 12 Tool cross-section: 20 × 20 mm Tools: max. 24 Turret indexing time: 0.11 s MACHINE DETAILS Control model: Siemens S828D Ndsdpfszzx Igjx Aqxjc Main motor power: 12.6 kW Power of driven tools: 6.2 kW High-pressure coolant pressure: 0.7 MPa Dimensions & Weight Machine dimensions (L × W × H): 2,540 × 1,595 × 1,693 mm Machine weight: 3,480 kg Operating hours: 43,500 h EQUIPMENT High-pressure coolant system, 0.7 MPa Transformer Chip conveyor Tool measurement / tool probe Collet chuck with 3 collets LNS bar feeder for bars up to max. 1.5 m length Workpiece catcher and ejection system Tool load monitoring CE conformity Highly rigid cast iron machine bed 12-position turret with accommodation for max. 24 tools Automatic bar feeder Oil separator for coolant Roller-guided linear guides Documentation/manual Spindle speed continuously adjustable

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, turning length: 400 mm, turning diameter: 420 mm, spindle motor power: 22 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 488 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, type of input current: three-phase, total height: 3,210 mm, total length: 3,600 mm, total width: 1,900 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 3-axis CNC vertical lathe with live tools and C-axis Nedpjx Sqafofx Aqxsdc

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,700 mm, total length: 4,000 mm, total width: 2,400 mm, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,383 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a horizontal machining center from the manufacturer Doosan. Operating hours: 11,320 h Spindle hours: 6,383 h The machine is in very good condition and can be inspected under power in our facility. Both clamping towers are included in the scope of delivery. Manufacturer: Doosan Model: HC 400 Year of manufacture: 2011 Control: Fanuc Series 32i-MODEL A Technical data: Travel X-Y-Z: 600x560x565 mm B-axis: 1° increment (indexing table) Rapid traverse X-Y-Z: 40 m/min Feed rates: 20,000 mm/min Ndjdpfx Aqeyl Iu Eoxsc Pallet size: 400x400 mm Spindle speed: 8,000 rpm Tool holder: SK40 Machine weight: 11,000 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray; Njdpjx Ncpgsfx Aqxsdc

Condition: good (used), Year of construction: 2011, operating hours: 15,100 h, functionality: fully functional, CNC turning machine Manufacturer: DOOSAN Type: LYNX 220 G-S Year of manufacture: 2011 Equipped with: FANUC i control system Ndedszybi Rspfx Aqxjc X-axis Y-axis Chip conveyor Bar feeder magazine LNS Quick Load Servo 65

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 10,127 h, load capacity: 5,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,800 mm, drive type: Diesel, Diesel forklift ISO class: ISO Class 4 = 5,000 - 10,000 kg Ndedpfx Aqsz Axf Ijxec Mast type: Standard Condition: Ready for operation and fully functional Technical condition: normal Side shifter, 3rd valve.

Condition: like new (used), Year of construction: 2022, operating hours: 259 h, turning diameter over cross slide: 790 mm, turning length: 2,124 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 35 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, 2-axis CNC lathe "DOOSAN DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Nedjqrr Nwepfx Aqxedc

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE Ndsdpfx Aqezak Dxexsc YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, Ndsdpjylbpvsfx Aqxsc spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: used, Year of construction: 2008, functionality: fully functional, turning length: 230 mm, turning diameter: 410 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 230 mm, Doosan PUMA H-310/TM CNC horizontal lathe, year 2008, equipped with FANUC Series 18i-TB control, ideal for precision machining of medium-sized workpieces with dual turret machining capability. Main technical specifications: Maximum turning diameter: Ø 410 mm Maximum turning length: 230 mm Recommended turning diameter: Ø 255 mm Maximum distance between spindle centers: 500 mm Axis travels: X: 210 mm Z: 230 mm Rapid traverse X/Z: 24,000 mm/min Nodpewt S Ugofx Aqxsdc Main spindle: Chuck: Ø 250 mm Spindle nose: ASA A2-8 Speed: 3,500 rpm Power: 15/18.5 kW Turret system: Number of turrets: 2 Stations per turret: 12 Driven tools: Speed: 3,000 rpm Power: 4 kW Tool dimensions: 25x25 mm (turning) / Ø 40 mm (boring) Included accessories: Chip conveyor Coolant tank with washing pump External high-pressure pump Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Compact, versatile, and high-performance machine, perfect for multitasking machining in high-efficiency production environments.

Condition: used, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas weight 2800 kg length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW cubic capacity 1.975 cm³ ccm Nsdpfxoztfyyo Aqxodc

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, turning length: 1,540 mm, turning diameter over cross slide: 1,000 mm, turning diameter: 670 mm, spindle motor power: 30 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, rotational speed (min.): 60 rpm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​7-axis multitasking CNC turning center “DOOSAN model PUMA MX3100S” with orientable upper head equipped with tool changer, opposing spindles and Fanuc 31i-MB5 CNC. Ndjdewdg Atspfx Aqxjc

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 9,267 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, coolant supply: 30 bar, spindle motor power: 26 W, number of spindles: 60, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, spindle nose: ISO 50, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, tool diameter: 250 mm, tool length: 550 mm, workpiece diameter (max.): 1,000 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Nsdpstvf Smefx Aqxjdc

Year of construction: 2008, condition: used, New: No Year of construction: 2008 Nodpfxoy Alt Uj Aqxjdc VAT/margin: VAT qualifying

Condition: good (used), machine/vehicle number: 16786, Year of construction: 2021, operating hours: 6,429 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, battery voltage: 80 V, fork length: 1,200 mm, front tire size: 23/10-12, rear tire size: 18/7-8, overall weight: 4,854 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Doosan Serial Number: FBA17-1390-00905 Ndsdox Rk Eljpfx Aqxec Battery Details: 80V 4 EPzS 620Ah BJ:12/2020

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 Nedpfx Aew Dgcasqxodc table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Ndodex I N Rbjpfx Aqxsc Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, Year of construction: 2007, operating hours: 21,000 h, functionality: fully functional, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, position of the milling head: Horizontal, feed length X-axis: 2,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,250 mm, workpiece weight (max.): 2,000 kg, total height: 1,250 mm, Table size 1000x1000 mm 1 Degree pisition Max. 2000 kg loading Fanuc 18iMB Nsdpfx Aqjxvtxcoxsdc ATC 90 pieces Iso 50 CTS 20 bar

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Ndedpfx Aqjzul R Isxjc Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar