Used Doosan Excavator for sale (325)

Condition: used, functionality: fully functional, machine/vehicle number: 2506, Year of construction: 2020, operating hours: 271 h, load capacity: 1,250 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,005 mm, fork length: 1,200 mm, drive type: Elektro, High-lift truck Hjdpfx Ahox S Tcpoueng Chassis number: 2506 Load centre: 600 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: PzS Battery year of manufacture: 2020

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = Hodpfxsx Scple Ahusng We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), machine/vehicle number: FDA0D-2740-14837, Year of construction: 2021, operating hours: 942 h, lifting height: 4,800 mm, free lift: 2,100 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 210 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Johanny Hendrikse for more information Hnedpfx Ahox Sb S Ssueg

Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231441, CNC lathe – DN Solutions (Doosan) LEO 1600 Year of manufacture: 2023 Condition: As new / very good, ready for operation Availability: Short notice / by arrangement Brief Description For sale is a CNC lathe DN Solutions (Doosan) LEO 1600, manufactured in 2023. The machine stands out for its high stability, user-friendly operation, and reliable machining performance. It is ideally suited for cost-effective single-part and series production in conventional turning applications. Features / Highlights - Horizontal CNC lathe - Powerful main spindle - Robust machine construction for high dimensional accuracy - Tool turret with fast indexing - Compact design, minimal space requirement - User-friendly CNC control - High reliability and low maintenance Technical Data Hsdpfox Tg R Njx Ahueng - Max. turning diameter: approx. 300 mm - Max. turning length: approx. 300 mm - Spindle bore: approx. Ø 65 mm - Main spindle speed: up to approx. 4,500 rpm - Tool turret: 12 stations - Control: FANUC CNC - Machine weight: approx. 3,500 kg The machine is fully functional both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: H2017, The Doosan H2017 is an advanced collaborative robot (cobot) that combines high performance with maximum safety and precision. Hnjdex Sv Rpepfx Ahujg With a lifting capacity of up to 20 kg and a reach of 1,700 mm, the H2017 is ideal for heavy-duty and large-scale applications across industries such as manufacturing and logistics. The robot features six integrated high-performance torque sensors, ensuring exceptionally precise motion control and safe human-robot collaboration. This technology makes the H2017 particularly suitable for tasks that require both strength and sensitivity – for example, palletizing, machine tending, assembly, and handling of heavy goods. Advantages of the Doosan H2017: • ✅ High payload capacity (20 kg) – ideal for heavy lifting • ✅ Extended reach (1,700 mm) – greater flexibility and coverage • ✅ Six torque sensors – allows precise, stable, and safe collaboration • ✅ Intuitive programming – rapid deployment and start-up • ✅ Advanced safety features – compliant with international standards • ✅ Robust and reliable construction – engineered for industrial environments Ideal for: • Palletizing and depalletizing • Machine tending • Assembly and joining operations • Intralogistics and material handling • Automation of manual or ergonomically challenging processes With the Doosan H2017, you get a future-ready cobot that boosts productivity, reduces employee workload, and delivers consistently high quality—every time. _____ Availability We offer ‘as new’ Doosan H2017 units for sale—still sealed in their original packaging. Additionally, we also supply used Doosan H2017 units at a reduced price, providing a cost-effective solution for those seeking premium quality at a lower investment. Please contact us for pricing and lead times.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC long turning lathe Hsdpswtg Disfx Ahujng Doosan Puma St20G Year of manufacture 2012 Bar feeder FMB turbo 3-26 Chip conveyor

Condition: good (used), Year of construction: 2006, 1 used CNC lathe Manufacturer: Doosan Model: Puma 300 MSB Year of manufacture: 2006 Control unit: Fanuc 18i TB Max. swing diameter: 590 mm Max. machining diameter: 355 mm Turning length: 583 mm Chuck diameter: 250 mm Travel X-axis: 650 mm Z-axis: 680 mm Max. bar capacity main spindle: 76 mm Main spindle max. speed: 3,500 rpm Main spindle motor power: 22 kW Turret Number of tools: 12 Feed X-axis travel range: 240 mm Machine dimensions Length: 3,700 mm Width: 1,900 mm Hnsdpfxox Taywe Ahujg Weight: 6 t Equipped with: Subspindle diameter: 170 mm Power: 7.5 kW Passage: 52 mm Driven tools

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Hodpfjx Ryrhjx Ahujng Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Machine weight: 4,750 kg.

Condition: excellent (used), machine/vehicle number: FGA03-1710-01886, Year of construction: 2019, operating hours: 1,743 h, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, fork length: 1,150 mm, Empty weight: 3.335 kg Lifting capacity: 2.000 kg Maximum passing height: 217 cm Hnsdpfxjx Sb S Ej Ahuog CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-05-01 Please contact Johanny Hendrikse for more information

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With chip conveyor and tool holders cone. Hjdpfxox Ttd Ne Ahujng

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Hsdpfsthb Icsx Ahusng Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: Hnedpox Sw E Iofx Ahusg - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, Year of construction: 2012, operating hours: 6,104 h, 2012 | Doosan DL420 | Used Wheel Loader | 6104 hours 📍Location: France, Gémenos 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 44 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very clean hydraulics 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39625 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Hsdpfsx R E H Rex Ahujng ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, PUMA 5100XLC (2023. 10) 100% NEW Swing over bed: 870 mm Max. Turning Diameter: 650 mm Max. Turning Length: 3042 mm X axis: 362 mm Z axis: 3150 mm RPM: 1000 Spindle: 2-step gear type Spindle thru-hole diameter: 275 mm OPTIONS LIST - FANUC i Series + iHMI - SAMCHULLY MH-224 (24") - 1 Set of Hard Jaws - Tailstock Center Type: Dead Center MT5 - S/R Programmable Twin Type D45-310_SLU5Z - Long Boring Bar Holder - Coolant Pump 4.0kW / 1.45MPa - Coolant Pressure Switch - Coolant Chiller - Coolant Gun - Oil Skimmer - Mist Collector 2.2kW Hjdpfxsx Rxv Ss Ahuong - 12-Station Turret - Right-Side Hinged Chip Conveyor - Bucket - Automatic Tool Setter - Air Gun - Air Blower for Chuck - Signal Tower - Auto Power Off - AICC 200 Block - Arbitrary Speed Threading - Re-machining Function - Threading Repair Function - Stored Pitch Error Compensation (Ball Screw Pitch Error Correction)

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, functionality: fully functional, turning length: 600 mm, turning diameter: 230 mm, spindle motor power: 22 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 50 rpm, bar passage: 65 mm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 8,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​8-axis CNC lathe "DN Solutions mod. PUMA TT1800SY" with motorized upper turret equipped with Y axis, motorized lower turret, opposing spindles and DN Solutions-Fanuc i-Plus iHMI CNC. Hnodpfx Aowuqp Eshujg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,840 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,840 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With tool holders Hjdpfx Ahox Trnaeueng

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Hjdjw Srarepfx Ahueng Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Hjdpjxlcivefx Ahuong

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914016, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Hjdpfoxzaqijx Ahusng Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Fanuc 0i-MD, workpiece length (max.): 400 mm, workpiece width (max.): 355 mm, workpiece weight (max.): 250 kg, total height: 3,120 mm, total length: 2,995 mm, total width: 2,975 mm, rotary table diameter: 350 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 270 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​5-axis vertical machining center with FANUC 0i-MD CNC Hnedpfsx N Tm Nox Ahusg

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Hedpeu Sfncofx Ahuong Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: FANUC, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, table height: 560 mm, table load: 300 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 34, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Hnsdou T Hg Tjpfx Ahueg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: MV0055-000189, Vertical machining center with 3 axes with automatic rotopallet DOOSAN DT 360D/40 FANUC 0I-MD Accessories: chip conveyor Meta with 300 litres tank litres high pressure pump Calpeda pump for washing predisp. Robot interface Hodpfxoga Efco Ahueng pre-set Locking... Total auto switch-off Tool life management

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, total height: 2,600 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 12 bar, spindle motor power: 17 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​3-axis vertical machining center with HEID CNC. TNC-530 Hjdpfox Da Ruox Ahuong

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 2,129 mm, turning diameter: 550 mm, spindle motor power: 26 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 90 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, type of input current: three-phase, total height: 2,305 mm, total length: 5,550 mm, total width: 2,300 mm, overall weight: 9,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 2-Axis lathe with FANUC 21i-TB CNC Hnsdpfxex Sqwws Ahujg