Used Doosan Machining Center for sale (304)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, total height: 2,985 mm, overall weight: 5,000 kg, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Additional equipment • Electronic Handwheel • Chip conveyor • Oil skimmer • Emulsion flushing gun • 2 x Hydraulic vice Blsdox D E H Iepfx Ah Iod • 25 x Clamping chuck BT40 Machine Benefits Technical Machine Benefits • Table dimensions: 1000 x 450 mm • Distance spindle nose - table surface: 150 - 775 mm • Max. Tool diameter with free neighboring places: 125 mm • Max. Tool diameter with occupied neighboring places: 80 mm Extra Information Machine still under power Dimensions Machine Depth 2158 mm

Condition: used, Doosan Model S 550L CNC Lathe Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Spindle bore 102.0 mm Spindle nose 6 mt Spindle speed 30 – 2500 rpm Spindle motor power 22 kw Turret 12 stations, Feeds 0.001 – 133 mm/rev Bedpfxeyka Sye Ah Ijld Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Manuals

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français Bedpfxjypt Ais Ah Ijld WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: reconditioned (used), Year of construction: 2016, operating hours: 13,425 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 0i-MF, table load: 600 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15 W, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN DNM 4500 vertical machining center with Fanuc 0i-MF CNC Blodpfxjynlzus Ah Isd

Condition: used, Year of construction: 2019, controller manufacturer: Fanuc, controller model: 0i-TF, _____ Description: Year of manuf. : 2019 Control : Fanuc 0i-TF Turning diam. : 175 mm Turning length : 120 mm Mainspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):11 kW Torque (max.):93 Nm Barcapacity:51 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop mini Axfix 65 Subspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):11 kW Bljdpfx Ahjynda Nj Iod Torque (max.):93 Nm Workpiececlamping:Collet chuck, Nann Movement in A:540 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:BMT 45P Tooldrive:6.000 rpm, 3,7 kW, 23,5 Nm Movement in X/Y/Z:135/80/530 mm Rapid travers in X/Y/Z:30/15/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 12 stations Taper:BMT 45P Tooldrive:6.000 rpm, 3,7 kW, 23,5 Nm Movement in X/Y/Z:135/80/530 mm Rapid travers in X/Y/Z:30/15/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pumps with High-pressure, 25 bar Toolmeasurement:Automatic Measuring arm, Renishaw Rawmaterialfeed:Barloader, Breuning-Irco ILS MUK 7012 III Finished part removal I:Parts catcher with Box (Mainspindle) Finished part removal II:Parts catcher with conveyor belt Toolholder:Misc. static and driven toolholder Further Equipment:Trafo, Oilskimmer

Condition: excellent (used), power: 44 kW (59.82 HP), fuel type: diesel, color: other, Year of construction: 2014, operating hours: 7,215 h, Year of manufacture: 2014 Drive: Track Number of cylinders: 4 Bjdpfxew U Ndyo Ah Iold Empty weight: 8.600 kg Dimensions (LxBxH): 620 x 230 x 264 cm Engine type: Yanmar 4TNV98C CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Korea Condition CE type: CE CW10 Hydraulic quick coupler, Hydraulic tilting bucket, Overpressure system

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, Bjdeyizllspfx Ah Ijld sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 810 h, load capacity: 2,500 kg, lifting height: 4,710 mm, load center: 500 mm, fuel type: gas, mast type: triplex, motor manufacturer: Mitsubishi, battery voltage: 12 V, fork length: 1,200 mm, overall weight: 4,120 kg, color: orange, Equipment: CE marking, pallet forks, sideshift, Including license plate Blodpfx Asylhnfjh Ijd

Condition: used, machine/vehicle number: FDB04-1240-02249, Year of construction: 2013, operating hours: 13,937 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, Empty weight: 7.436 kg Lifting capacity: 5.000 kg CE mark: yes Latest inspection: 2024-01-10 Please contact Johanny Hendrikse for more information Blodjrh Eb Espfx Ah Ijd

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 8,000 kg, Fanuc control, 12-position turret, Y-axis, Tailstock, Chip conveyor, Tool-Eye, Bljdpfsymfd Tex Ah Iod Tool holders

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 8,000 kg, Fanuc control, 12-position BMT turret, Y-axis, Tool-Eye, Tailstock, Chip conveyor, Steady rest, Bodpjymfdtofx Ah Ield Tool holders.

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,810 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm Bjdpow Afrdofx Ah Ijld

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,890 h, Year of manufacture: 2017 Bodpfx Aexqfhlsh Ijld Empty weight: 8.500 kg Digging depth: 4.175 m

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,010 h, Equipment: air conditioning, Year of manufacture: 2021 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Bledpfxovpqlko Ah Ied Track width: 60 cm Digging depth: 6.94 m

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 6,560 h, Year of manufacture: 2017 Number of cylinders: 6 Blsdpfjxxkf Ssx Ah Isd Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Bodpfx Aoyhdw Ish Isld Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2022, CNC Lathe Doosan Puma 700 M II Control: Siemens Sinumeric 828 Year of manufacture: 2022 Turning length: 1,600 mm Turning diameter: 900 mm X-axis travel: 470 mm Bodpfxoyk Tdie Ah Ijld Z-axis travel: 1,650 mm Spindle speed: 3 – 1,500 rpm Tool turret: 12 stations (all driven) Tool holder: BMT 85P Equipment: Self-centering steady rest Chip conveyor Touch setter 3-jaw chuck Programmable tailstock Extraction system Coolant pump 20 bar with cyclone filter Oil mist extractor

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, Bljdpjyia T Sofx Ah Ijd max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min Bledpfxsylcqzs Ah Ied number of tool places 12 Pos. auto power on hours ca. 18.136 h spindle hours ca. 8.822 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 11.197 h spindle hours ca. 5.359 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Bedpfxsylcque Ah Iold Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning length: 513 mm, turning diameter over cross slide: 300 mm, spindle speed (min.): 4,500 rpm, spindle bore: 76 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 580 mm, DOOSAN PUMA 240MS LATHE WITH SUBSPINDLE AND BAR FEEDER Bsdeyivakjpfx Ah Ield

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus Bjdpjw Dkflsfx Ah Isld WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 vertical machining centre. Contact us for more information. • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Bljdpfx Aox U Dtweh Iod Dimensions Machine Depth 4050 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 300 mm, travel distance Z-axis: 3,120 mm, number of axes: 2, Horizontal turning machine manufactured in 2016. This DOOSAN Puma 3100 ULY was designed for precision with a maximum turning length of 3,100 mm and a turning diameter of 420 mm. It features a tool turret with 12 positions and a spindle chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 3100 ULY machine we have for sale. Contact us for further details. Bodoyk U A Hepfx Ah Ield • Maximum turning length: 3,100 mm • Maximum turning diameter: 420 mm • Maximum bar capacity: 102 mm • Spindle chuck diameter (main spindle): 315 mm • Tool turret: 12 positions • Driven tool power: 7.5 kW • Number of axes: 2 (X, Z) Additional equipment • High pressure system: 10 bar • Automatic presetting: Yes • Chip conveyor: Belt type

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Lithium-ion battery. Perfect forklift condition We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp in French ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. Bjdpfx Ajymxyush Ijld The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us