Used Doosan Machining Center for sale (323)

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, Ihodpfx Ahsx Eluwjuet 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, Iedex Elr Aopfx Ahusht C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Serial number: N016 Isdpfxjxgz Utj Ahueht Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C Ihsdpfx Aeullmdehuet * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: used, Year of construction: 2017, operating hours: 6,150 h, Year of manufacture: 2017 Empty weight: 23.500 kg Iodpfx Aettzmnshueht Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,810 h, Year of manufacture: 2010 Drive: Wheel Ihedow Afrdepfx Ahujt Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,580 h, Year of manufacture: 2014 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Isdpfx Asxqfciehujht Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Isdpfx Ahsxxdmioueht Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: like new (used), Year of construction: 2014, DOOSAN LYNX 220 LATHE YEAR 2014 TECHNICAL DETAILS Working area Maximum turning diameter: 320 mm Maximum spindle travel: 510 mm Maximum turned length: 305 mm Bar passage: 51 mm Ihedpfxjw Ht I Is Ahujt Motor power: 11 kW Control: Fanuc i-Series Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg

Condition: used, Year of construction: 2007, DOOSAN LYNX 220 LATHE CNC FANUC Series Oi-TC Machine compliant with “CE” standards Max. swing over bed: 510 mm Max. swing over carriage: 290 mm Max. turning diameter: 320 mm Max. turning length: 305 mm Ihedpjw Al Uxofx Ahuet Max. bar capacity: 52 mm Spindle nose: ASA 6” Spindle: max. rotation speed 50/5000 rpm Spindle motor power 11/15 kW Turret: 12 stations Tool dimensions (turning/boring) 25×25 / diameter 40 mm Machine weight: 2,900 kg Supplied with chip conveyor, tool presetting device, and a set of tooling.

Condition: used, Year of construction: 2008, functionality: fully functional, turning length: 230 mm, turning diameter: 410 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 230 mm, Doosan PUMA H-310/TM CNC horizontal lathe, year 2008, equipped with FANUC Series 18i-TB control, ideal for precision machining of medium-sized workpieces with dual turret machining capability. Main technical specifications: Maximum turning diameter: Ø 410 mm Iodpfx Ajwt S Ugjhueht Maximum turning length: 230 mm Recommended turning diameter: Ø 255 mm Maximum distance between spindle centers: 500 mm Axis travels: X: 210 mm Z: 230 mm Rapid traverse X/Z: 24,000 mm/min Main spindle: Chuck: Ø 250 mm Spindle nose: ASA A2-8 Speed: 3,500 rpm Power: 15/18.5 kW Turret system: Number of turrets: 2 Stations per turret: 12 Driven tools: Speed: 3,000 rpm Power: 4 kW Tool dimensions: 25x25 mm (turning) / Ø 40 mm (boring) Included accessories: Chip conveyor Coolant tank with washing pump External high-pressure pump Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Compact, versatile, and high-performance machine, perfect for multitasking machining in high-efficiency production environments.

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand FANUC Isdpjx Rd Hvofx Ahujht Main Drive Number of axis 6 Spindle Speed 3600 RPM Spindle motor power 22 kW Movement X-Axis Movement 250 mm Y-Axis Movement 50 mm This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), power: 44 kW (59.82 HP), fuel type: diesel, color: other, Year of construction: 2014, operating hours: 7,215 h, Equipment: air conditioning, Year of manufacture: 2014 Drive: Track Isdpfx Ajw U Ndyjhujht Number of cylinders: 4 Empty weight: 8.600 kg Dimensions (LxBxH): 620 x 230 x 264 cm Engine type: Yanmar 4TNV98C CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Korea Condition CE type: CE CW10 Hydraulic quick coupler, Hydraulic tilting bucket, Overpressure system

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Ihodpjx Hy R Nefx Ahuot Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Table load 400 kg Ihodpfx Aox E Egajhuot Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Empty weight: 3.500 kg Isdpjxqfb Eofx Ahuoht Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m

Condition: used, Year of construction: 2017, operating hours: 7,830 h, Year of manufacture: 2017 Ihjdpfxox Hgtwe Ahuet

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,240 h, Year of manufacture: 2014 Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Ihjdpfx Ahsx Hgrajujt Digging depth: 10.795 m

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,640 h, Year of manufacture: 2015 Empty weight: 14.400 kg Ijdpox Hgqijfx Ahusht Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,550 h, Year of manufacture: 2015 Ijdox Hgn Uspfx Ahujht Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes and Milling function with the C axis. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Iedox D Hmvjpfx Ahusht Application Types Turning

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Ihjdpfx Ahjx Eivpjuot Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Ijdpsx E Eamofx Ahusht Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3480 mm Measurements depth 3850 mm Measurements height 3170 mm Machine weight 13500 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1630mm Y-Axis Movement 762mm Z-Axis Movement 650mm Tools Type of tool holder BT40 Ijdpfxsx D R I Rs Ahueht This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Ihodpfx Ahox D Il Heuet Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning