Used Grob G550 for sale (6)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center Knodpfx Aozxf Hkjhijc GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN 10342, GROB G552 – G550 AB Generation 2 (SN 10342) HORIZONTAL 5 AXIS MACHINE - NEW IN OUR SHOWROOM (177 HOURS SPINDLE - ONLY DEMOS WITHOUT ANY MACHINING OR CHIPS MAKING) X-axis travel: 800 mm Y-axis travel: 1020 mm Z-axis travel: 970 mm A-axis travel: -185º/+45º (torque motor) B-axis travel: n x 360º (torque motor) Table diameter ( T-slots): 770 mm Max workpiece diameter: 900 mm Max workpiece weight.: 800 Kg RAPID traverses X/Y/Z: 65/50/80 m/min AXIS acceleration X/Y/Z: 6/4,5/7,5 m/s2 Kjdpfxez Sdugs Ahionc Total positioning repeatibility < 0,0025 mm MOTORIZED spindle GROB, HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW,oil-air lubrication GROB spindle diagnostics GSD Flushing unit Z-axis Machine cooling system through an air cooled chiller unit (13 Kw) Horizontal disc-type tool magazine HSK-A 63 with 70 tool pockets Max. tool length (automatic change): 465 mm Max. tool length (manual change): 700 mm Work platform at tool magazine Tool cleaning device by compressed air Machine control Heidenhain TNC 640 with GROB4Pilot control panel Electronic handwheel HR 520 (Heidenhain) Grob Kinematic measuring inspection equipment Collision monitoring DCM Collision (HEIDENHAIN) Swivel axis calibration GSC advanced Laser measurement system BLUM LaserControl LC-50 DIGILOG for milling tools Radio touch probe RMP400 with remote RMI-Q Scraper type chips conveyor Cutting fluid filtration system Cutting fluid tank 1.250 L Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose CTS High-pressure cutting fluid unit (10-80 bar, ICS) Flushing unit for the base of the work area Flush and air guns at the work area Oil skimmer for cutting fluid care Machine status lamp (4) in the machine enclosure Total weight 25,7 ton CE Mark

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -180 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW max. torque at 40% / 100% load 223 / 160 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 50 tool length - max. 400 / 465 mm Knjdpfxozz Afcs Ahisc tool diameter 72 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 26,00 t dimensions of the machine ca. 7,00 x 4,50 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant unit, sitchable to minimal quantity lubrication coolant through the spindle max. 80bar, chip conveyor.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: U300625501192, travel distance X-axis: 800 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece diameter (max.): 900 mm, workpiece weight (max.): 800 kg, table load: 800 kg, rotary table diameter: 770 mm, rotational speed (min.): 50 rpm, spindle speed (max.): 16,000 rpm, number of spindles: 1, number of slots in tool magazine: 208, tool length: 465 mm, tool weight: 8 g, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 3 months, Equipment: documentation/manual, rotational speed infinitely variable, Base machine G550 AB, Generation 0 Travel in X: 800 mm Travel in Y: 950 mm Travel in Z: 1020 mm Power supply: 400 V, 50 Hz, TN-S Dust extraction port for connection to a work area extraction system Swiveling table (A' axis) Rotary table (B' axis), pallet clamping system GROB Machine control: HEIDENHAIN iTNC 530 Optimization of the machine kinematics with KinematicOpt GROB standard interface to the loading system V1.4 Kjdpfx Ahszmabfeionc Swiveling table (A' axis) Rotary table with pallet clamping system GROB (B' axis) Motor spindle HSK-A 63, 16,000 min-1, 159/206 Nm, 25/32 kW GROB spindle diagnostics GSD Simple disc magazine HSK-A 63 with 50 tool positions Tool additional magazine TM167 HSK-A 63 with 167 tool positions Tool cleaning device Electromechanical tool length measuring device Palette 630 x 630 mm, grid hole pattern, without gripper claws Scraper belt chip conveyor, discharge height 1,100 mm Coolant high-pressure system (5-38 bar, internal coolant) Coolant low-pressure system Compressed air supply through the spindle center External compressed air supply via a flexibly adjustable hose Switchable coolant pressure booster for the nozzles in the motor spindle Oil skimmer for coolant maintenance Flushing device for the floor of the work area Blow-out gun in the work area Flushing gun in the work area Flushing device (Z-axis) Workpiece clamping system in the work area - KP1: Hydraulic oil, manual pressure reduction, 30-200 bar (H1) - KP2: Hydraulic oil, manual pressure reduction, 30-200 bar (H1) - KP3: Hydraulic oil, manual pressure reduction, 30-200 bar (H1) - KP4: Hydraulic oil, manual pressure reduction, 30-200 bar (H1) Machine status indicator, three-color Infrared measuring probe m&h IR25.41 Remote machine diagnostics with access control switch Warranty for 3 months

Condition: used, Year of construction: 2016, x-travel 800 mm y-travel 1020 mm Kedpfx Aezy Saajhionc z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206 / 159 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 272 tool length - max. 400 / 465 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 10,00 x 6,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant, coolant through the spindle, chip conveyor, RENISHAW measuring probe, BLUM-Laser, GROB Spindle-diagnosis (GSD) Additional Tool-Magazine TM218, Pallett-Storage PSS630-R13-12

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm weight of the machine ca.: 17 t dimensions of the machine ca.: 6 x 3 x 3,2 m Diameter of the table: 770 mm max. table load: 800 kg tool taper: HSK-A63 Knjdpfjt Rmd Ijx Ahioc max. tool length: 465 mm no. of tools in magazin: 60 spindle turning speed range: 12.000 U/min feed power: 8 kN kp power capacity: 25/35 kW 5 axis G550-1024 HSK A-63 Grob (Bezeichnung G550-1024) 1 spindle *