Used Hoffmann Broaching Machine for sale (44)

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm Delhcocdtnhedwvjkh max. cutting speed: 10 m/min. max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device

Year of construction: 1980, condition: used, max. tractive force: 10 to max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min Dkslhcecdtpledwvoh max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to automatic tool feeder hydraulic drawing head and end piece holder locking device automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor

Year of construction: 1969, condition: used, machine/vehicle number: 6.223.0085, Force:10 to Stroke: 1250 mm Dkolhcjbrcl Iedwvjh 3 Broaching stations Area required: appr. 140 x 120 cm

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool Dkelheyhcg Uecdwvsh -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and mortise drilling machine HOFFMANN HR 150 Very good condition, as new. The machine comes from an installation company and shows virtually no signs of use—absolutely like new. It was only used for minor modification work and is now being sold because it has been idle for the last few years. With this machine, you can mill mortises and drill dowel holes on two levels without reclamping. Supplied with documentation. - 380V, 1500W - 2840 RPM - Year of manufacture: 1997 With the machine, you can mill mortises for lock cases and similar applications, create all types of frame dowel joints at right angles, butt joints, and miters. Ideally suited for dowel joint production in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar uses. Thanks to two-level drilling, indexing stops, and machine design, dowel joints can be produced in the shortest time possible, making the machine highly economical. Requires 6 bar compressed air connection (very low air consumption). - Right-hand rotation - Mills and drills precisely and cleanly Djlhcdweyhzilovjkh - Fitted with mobile base - Two stops left and right on the machine table; an additional 45° miter stop is included - Two fold-out workpiece supports - Comes with 3 drill chucks: for drills with a 16 mm or 12 mm shank, and for drills with M10 thread - Workpiece clamping is achieved with two pneumatic cylinders operated via foot pedal, allowing you to hold the workpiece with both hands - Height adjustment between drilling levels is also pneumatic; the control switch is positioned at the adjustment lever for the indexing rail, ensuring quick changeover between indexing positions and drilling levels - Equipped with a precision 12 mm indexing rail with a center position and 13 stops left and right - Both drilling levels feature highly accurate counters, allowing for quick, easy, and precise setting of each drilling level height - Can also be used as a mortise drilling machine, with two adjustable stops left and right, providing up to 500 mm of lateral travel - The machine features a fence at the front of the table, height-adjustable as needed - Max hole height approx. 100 mm - Max drilling depth approx. 150 mm, with depth stop - Max workpiece height approx. 250 mm - All functions operate perfectly The machine can be personally delivered and demonstrated anywhere in Germany for 220.00 EUR, so you take no risk with your purchase. Delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep Professional-grade machine, not DIY store quality Ready for immediate use Very robust and durable construction Precision guides with play-free ball bearing bushings are in perfect working order and move smoothly Very stable and torsion-resistant design

Condition: used, Power: 1,000 W Speed: 33,000 rpm Djljw Db H Tjhcdwvekh Dovetail milling motor Hoffmann type UAD 33-F.

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with Angle Adjustment Specialized drilling machine for stair construction, window manufacturing, and universal use thanks to pneumatic height adjustment. Angled doweling and drilling for balusters are easily accomplished with the swiveling drilling unit. - Motor with pole switching, two speeds - Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm - Motor started via practical handle switch - Precision chuck with two inserts: 16mm and M10 thread - Table size approx. 1100 x 240 mm - Linear laser for precise workpiece positioning - Drilling unit swivels 65° to both left and right - Pneumatic adjustment of working height allows doweling on two levels without setup changes - Desired drilling heights for each level can be set using handwheel and digital counter; switching between levels is pneumatic from the front - Cross adjustment approx. 320 mm, stepless or in 12 mm increments - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, mountable at front and rear of the table - 2 swiveling workpiece supports - 2 side fences, also usable as front supports - Mobility kit - Extraction connector 80 mm - 4 used but good drill bits: 9, 12, 16, 19 mm Few touched-up paint spots, excellent condition—see original photos. A used swiveling slot mortising machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by prior arrangement. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this dealer." Dslsyfta Tehcdwvokh

Condition: good (used), Year of construction: 1994, functionality: fully functional, Slot mortising machine with dowel insertion unit The machine is sold as shown in the pictures, without any additional accessories! Dkolhoygw R Sjcdwvjh

Condition: like new (used), Year of construction: 2018, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 96614, power: 1 kW (1.36 HP), compressed air connection: 6 bar, "BARGAIN" Due to business closure, all carpentry machines are being sold. Among others, the following machine, which has only been used for testing purposes: Portable and flexible bench machine, mills a dovetail groove per cycle for dovetail sizes W. Function: Set stops to size and insert workpiece. Pressing down the handle clamps the workpiece. At the same time, the milling unit moves to the preset milling depth. Lifting the handle releases the milled part, and the motor shuts off automatically. Done! Technical Data: Electrical connection: 1ph/N/PE 230 V 50/60Hz 1.0 kW Motor: 1 x 1000 W No-load speed: 34,000 rpm Control: manual Workpiece clamping: manual Passage height: 130 mm Milling depth: 0-85 mm Dolhsyg Ib Iscdwvskh Extraction nozzle: Ø 50 mm Dovetail size: W Dimensions (W/D/H): 740/650/835 mm Weight: 32 kg

Condition: excellent (used), Year of construction: 2013, liter capacity 300 l feed pressure 18,5 bar coolant capacity 2800 l Filter capacity 1,5 m² total power requirement 45 kW Dkjlhcdsxxmm Sswvjh weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l Dkslhcjwgizwsdwveh feed pressure siehe Plan bar coolant capacity 2900 l Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes Wction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Dkjlhovwf Dkjcdwvjh

Condition: used, Year of construction: 1989, with many drills used, top condition Make Hoffmann Type DB 23 Year of manufacture 1989 Machine no. 169 Number of spindles 23 Number of drilling beams 1 Spindle spacing / grid 32 mm Drilling from below stroke 60 mm Stop rulers with central adjustment Working width 704 mm (1080 - portal passage) Drilling depth 70 mm horizontal Drill holder M 10 / cone 30° Delhcdwsvyurcsvekh Space required approx. 1300 mm x 1000 mm x 1300 mm Weight approx. 500 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, Year of construction: 1995, with pneumatic lift for drilling on 2 levels used, excellent condition, low hours Dslhcdjw Ed Ucowvskh Manufacturer: Hoffmann Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 CE type tested Drill chuck: 16 mm Dowel drilling device with 1 piece indexing guide Workpiece stop Mitre gauge 45° Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pcs Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without guarantee or warranty

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Dkslhcox T Ah Dsdwvjh Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Dslhcjhvmkisdwvjkh Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, steel ruler Dslhcdwouz H T Ssvekh -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm .: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

Condition: good (used), Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm Dkslhcdewu Rnbowvsh -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece

Condition: used, C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm Dkolhcsr R Abhsdwvoh -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Condition: used, Workbench, work table, assembly bench -Width: 1500 mm -Depth: 710 mm -Height: 890 mm -Thick worktop: 50 mm Dkslhcdwod R N H Sjveh -Drawer: 1 -Door: 1 -Trays: 4 -Weight: 103 kg

Condition: excellent (used), For sale: CNC tool holder GARANT (Hoffmann Group) – model SK40-16-100. High-quality clamping system for milling machines and machining centres, ideal for precision metalworking. • SK40 taper – industrial standard • Clamping diameter Ø16 mm • Length 100 mm • Balancing G2.5 – up to 25,000 rpm • Max. tightening torque 50 Nm • Premium brand – GARANT (Hoffmann Group) • Very good condition, used, fully functional – equipped with cutters/drills. Dkolhcdow Sy Epjwvsh -- PRICE IS FOR 1 PIECE --

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Djlhjvk Dqvecdwvskh Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion Dkelhcdjw Tbnuswveh *

Condition: good (used), Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces Delhcdwsb A N Nwjvokh -Sale: only complete set -Weight: 9 kg

Condition: new, machine/vehicle number: 01-08070, Filter belt, plastic endless belt oil filter system Hoffmann Dksleqmnp Djhcdwvjh Completely new, packed and ready for immediate delivery. Item number: 74-41515070 Make number: 01-08070 Dimensions: 5150 x 995 mm 70µ