Used Kern Inserter for sale (33)

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. Hnjdpfxjwfglwo Ab Nel .

Condition: used, Year of construction: 2006, Kern 2500 Document Inserter & Multimailer, Kern Man Machine Interface, 10 & 6 x 9" Infeed Hopper, (6) x Document Infeed Hoppers, 12 Position Carousel Packing Unit, Outfeed Conveyors, Cognex Scanner System, SMX 3.2m Footprint. S/No. 6017410.001 (2006) Hnjdpfxey Sg Ths Ab Nsl Location: These lots are located in Aldridge, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Hjdpfx Abey Sniqo Nsnl Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Hjdexfwfxjpfx Ab Njnl Counter: 145 million Full service contract. When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. I have 2 machines for sale with this configuration.

Condition: used, Year of construction: 1985, functionality: limited functionality, machine/vehicle number: WW 12 24 2292, travel distance X-axis: 160 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 20,000 rpm, rotational speed (max.): 20,000 rpm, For sale is a classic precision milling machine from Kern Microtechnik, specialized in micro-machining and fine mechanics. This machine stands out for its compact design and the exceptionally high inherent accuracy characteristic of Kern machines. Technical Data & Features Model: Kern 10/16 (Type WW 12) Control: Heidenhain TNC 135 Travel Paths: X-axis: 160 mm Y-axis: 100 mm Z-axis: 200 mm 4th / 5th axis included Hodpfx Aey Nbcrsb Njnl Spindle: High-frequency spindle (HF) for speeds up to approx. 30,000 – 40,000 rpm Year of manufacture: approx. 1984–1986 (serial number 229) Condition & Particularities Visual condition: The machine is in a well-maintained state considering its age, with normal signs of wear to the paintwork. Important note: The automatic tool changer is currently defective. However, the machine can still be loaded manually or repaired by skilled technicians or hobbyists. Fields of application: Perfectly suited for the watchmaking industry, jewelry manufacturing, electronics, or demanding model making.

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm Hnodpfxsr U Skho Ab Nel turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse Hodpeyr Si Tofx Ab Nonl

Condition: good (used), Year of construction: 2009, Module from Kern 2600: EFQR Single Sheet Feeder right There is one missing element for the engine installation: part no: 2032468.001 Motor flange ELMO Hnsdpfxoy Iwq No Ab Nsl

Condition: good (used), Year of construction: 2015, functionality: fully functional, Module from Kern 2600: SIGR Continuous Forms Cutter right with K2600 Options Station Hodpfx Aoy Iwn Usb Nsnl

Condition: refurbished (used), Product information "Leadscrew and feedscrew lathe Kern D 20 A" Leadscrew and feedscrew lathe from Kern Type / Model: D 20 A Condition: Overhauled Technical data: Centre height: 215 mm Centre distance: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - 3-axis digital readout - Emergency stop push button - Multifix quick-change toolpost system Hnsdpsy H Iqwjfx Ab Nel - Machine light - Coolant system - Live centre

Condition: refurbished (used), Kern Lead Screw and Feed Shaft Lathe Type / Model: D 20 A Condition: Refurbished Technical Data Centre height: 215 mm Centre distance: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speed range (24): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - 3-axis digital readout - Emergency stop button Hnjdpfxsy H Ecke Ab Nel - Quick-change tool post, Multifix system - Machine light - Coolant system - Rotating centre

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, Equipment: rotational speed infinitely variable, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Hjdpsxlza Hefx Ab Njnl Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. Hnedpfx Abey Ep Thj Nsl ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: excellent (used), Connection: mains plug 230 / 12 V Hnodpfx Absy Edaxo Njl max. 620 g e=0.01 g min. 0.1 g d=0.001 g

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 Hnedpfxer D Nmyo Ab Nsl - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale. Below you will find information about the envelope inserting system offered for sale: - Equipped with Mail Factory - KVS Inserting and Sealing Module - K990 Cutter (Datalogic scanner upper and lower) + K940 Merger x 1 pc - DE Direct Entry Module x 1 pc - LM Spacer Module x 1 pc - FSH Folding Module x 1 pc - BFGD Module x 2 pcs - Transport Module x 1 pc - Output Bin x 4 pcs - VRO with conveyor When purchasing together with a Kern 3500 machine, an attractive package price can be arranged. Hnodpjy Eym Uefx Ab Njl Additional modules from another machine are offered in a separate listing and available upon request: - EFQR Single Sheet Feeder right x 1 pc - SIGR Continuous Forms Cutter right with K2600 Options Station x 1 pc - BFGD Module (for parts only, incomplete, without covers) x 1 pc - LM Spacer Module (functional, fully complete) x 1 pc - VRO with conveyor (functional, fully complete) x 1 pc

Condition: used, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale division: 0.01 mm Hnjdpfxeyhmwqo Ab Njl Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale division: 0.01 mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos16 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos19 Manufacturer: Hommel Werke Measuring range: 200 – 225 mm Scale division: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale division: 0.01 mm Pos26 Manufacturer: Kern Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos29 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale division: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale division: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150 – 175 mm Scale division: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175 – 200 mm Scale division: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250 – 275 mm Scale division: 0.01 mm Thread micrometers – screw micrometers Micrometer - Frame micrometers – measuring instrument e.g. for gear measurement – external measurement tool – disc micrometer – precision micrometer – precision measuring instrument – frame micrometer Price per piece: €35 net, ex-works, plus packaging costs Subject to errors and omissions in all technical data. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Hsdpfx Abex H A Nbj Nenl • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Inserting speed: 22,000 mail pieces/h Envelope stacking capacity: 3,000 pieces (24#) Insert stacking capacity: 2,000 pieces (single, folded 20#) Feeder capacity: approx. 45.56 cm Tolerance: ± 0.08 cm Format range: 9.84 × 16.19 cm to 17.62 × 25.08 cm MACHINE DETAILS Electrical data Hodeyzpgijpfx Ab Njnl Power supply: 3 × 400 V, 3PN+E, 50–60 Hz Protection: 16 A Dimensions: approx. 11.89 x 0.92 m Counter reading: 145,000,000 The indicated dimensions and format sizes were taken from the data sheet and converted from US measurements (in./ft.) to cm. Note: The machine is currently under a full maintenance contract.

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1500 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. Hsdpfjwgn Agex Ab Nsnl It is characterised by: --> Ease of operation Precision Working range

Year of construction: 1990, condition: ready for operation (used), Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible. Hnedpfoxx Ufpjx Ab Nel

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Hnedox Tpytopfx Ab Nol

Condition: repair required (used), Year of construction: 1991, LZ-Lathe Fabr.KERN Type :DS 22 A Year of construction: 1991 with 3-axis digital readout Heidenhain . Steady rest, tool holder Multifix B, rear panel, machine documentation available. Machine is defective ( clutch ) Center height : 275 mm Hodpfxoq Hd I To Ab Nonl Turning diameter over face support : 300 mm Center distance : 1000 mm Spindle bore : 52 mm Spindle speeds : 18 - 1800 rpm . Machine is sold at a fixed price .

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Multifix size C with holders coolant device. turning diameter overbed:500mm turning diameter overplane : 250mm centre distance : 1000mm Hodpfsgqxciox Ab Nonl spindle speed: 12 -1200U/min Machine can be demonstrated under current Good guides .

Condition: excellent (used), Year of construction: 1994, Manual Plus control unit Turning diameter 260 mm Swing diameter 475 mm Center distance 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 Hnsdpfx Aot T T Urob Njl 4-fold parat holder Tailstock