Used Kern Milling Machine for sale (36)

Condition: good (used), Year of construction: 2010, machine/vehicle number: 743, There are two units available, manufactured in 2010 and 2007. Gbodpfozfwqzox Ahter (Please provide your offer price.) Sales are limited to within Europe, including Turkey. Price excludes packaging; delivery terms: FCA (machine location). ===== Technical data can be found in the attached handout. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Gedpfx Ahjx Tpytstebr

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, Equipment: rotational speed infinitely variable, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. Gbedpfx Aoxlza Hehtjr The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Gbodpjztzqnofx Ahtor

Condition: new, kern-kfp-v20-ip65 Gbsdpfoztxcujx Ahtsr Please note that the display is not included in the scope of delivery. - Weighing platform made of stainless steel. - The floor scale is made of aluminum and has a silicone coating, IP65, OIML-R60 approval, Class III, 3000 e. - The adjustable feet ensure perfect balance, allowing for accurate results.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Gbodpfx Ahjztc U Ujter Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Various dial indicators from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125mm Scale value: 1/100 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50mm Scale value: 1/100 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50mm Scale value: 1/100mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95mm Scale value: 1/100mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 Pos8 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos10 Gbsdpjyhmwqefx Ahtsr Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100mm Scale value: 1/100mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100-125 mm Scale value: 1/100mm Pos16 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos17 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos19 Manufacturer: Hommel Werke Measuring range: 200-225 mm Scale value: 1/100mm Pos23 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos26 Manufacturer: Kern Measuring range: 0 - 25 mm Scale value: 1/100mm Pos28 Manufacturer: Unknown Measuring range: 70 - 95 mm Scale value: 1/100mm Pos29 Manufacturer: Unknown Measuring range: 25 - 50 mm Scale value: 1/100mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 - 50 mm Scale value: 1/100mm Pos35 Manufacturer: Mahr Measuring range: 120 - 145 mm Scale value: 1/100mm Pos36 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos37 Manufacturer: Mahr Measuring range: 170 - 195 mm Scale value: 1/100mm Pos38 Manufacturer: Steyr Measuring range: 150 - 175 mm Scale value: 1/100mm Pos39 Manufacturer: Steyr Measuring range: 175 - 200 mm Scale value: 1/100mm Pos40 Manufacturer: PAV Measuring range: 250 - 275 mm Scale value: 1/100mm Thread measuring gauges - Micrometer gauges Gauge - Dial indicators – Measuring device, e.g. for gear measurement – External measuring tool – Plate micrometer - Fine measuring gauge - Precision measuring device - Dial indicator Dial indicator Price negotiable Price per piece € 35,-- net ex works, plus packaging costs Subject to typographical errors in all technical specifications. Sale exclusively in EU countries.

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm Gsdpfxszp Rvle Ahtobr turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package - NO additional tools included

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Godpfxsv D H Nbe Ahtjbr

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// Gbodpfxegccuco Ahtsr -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale. Below you will find information about the envelope inserting system offered for sale: Gbedpfey Eym Uox Ahtsr - Equipped with Mail Factory - KVS Inserting and Sealing Module - K990 Cutter (Datalogic scanner upper and lower) + K940 Merger x 1 pc - DE Direct Entry Module x 1 pc - LM Spacer Module x 1 pc - FSH Folding Module x 1 pc - BFGD Module x 2 pcs - Transport Module x 1 pc - Output Bin x 4 pcs - VRO with conveyor When purchasing together with a Kern 3500 machine, an attractive package price can be arranged. Additional modules from another machine are offered in a separate listing and available upon request: - EFQR Single Sheet Feeder right x 1 pc - SIGR Continuous Forms Cutter right with K2600 Options Station x 1 pc - BFGD Module (for parts only, incomplete, without covers) x 1 pc - LM Spacer Module (functional, fully complete) x 1 pc - VRO with conveyor (functional, fully complete) x 1 pc

Condition: good (used), Year of construction: 2009, Module from Kern 2600: EFQR Single Sheet Feeder right There is one missing element for the engine installation: part no: 2032468.001 Motor flange ELMO Gbodpfxey Iwq Nj Ahtsr

Condition: good (used), Year of construction: 2015, functionality: fully functional, Module from Kern 2600: SIGR Continuous Forms Cutter right with K2600 Options Station Gbodpjy Iwn Uofx Ahtsr

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: Reconditioned Technical data: Gbjdpfx Ahoy H Iqwetor Distance between centers: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix Gsdpfxjy H Ecke Ahtebr - Machine light - Coolant system - Follower center

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Gjdpoxfwfxsfx Ahtjbr Counter: 145 million Full service contract. When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. I have 2 machines for sale with this configuration.

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, Gbedpfxor U Skhe Ahtor SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Gbsdpfx Aheu A Ducstor Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System Gsdpfx Ahezbub Detobr • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo. Gjdpfjx H A Nbox Ahtjbr

Condition: excellent (used), 2-Component Dosing System Manufacturer: Hilger & Kern Component A container size: 45 liters, with manual agitator Component B container size: 24 liters Year of manufacture: 1990 Gbedpfxoy Udv Es Ahter Includes mixing gun Transport dimensions: Length: 850 mm Width: 850 mm Height: 1600 mm, including pallet

Condition: ready for operation (used), Year of construction: 1970, LZ lathe, manufacturer: KERN, type: DS 20 AL, year of manufacture: approx. 1970 with 3-jaw chuck, Forkardt 250mm, tool quick-change holder Gbjdpfogqxcisx Ahter Multifix size C with holders, coolant system. Turning diameter over cross slide: 500mm Turning diameter over carriage: 250mm Distance between centers: 1000mm Spindle speeds: 12 - 1200 rpm Machine can be demonstrated in working condition. Good condition of guides.

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse Gbodpfx Ahoyr Si Tetjr

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used Gsdpfjy Ep Thex Ahtebr PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: excellent (used), Connection: mains plug 230 / 12 V max. 620 g e=0.01 g min. 0.1 g d=0.001 g Gedsy Edaxepfx Ahtebr