Used Biesse Rover A Edge for sale (323)

Condition: used, machine/vehicle number: 007839, X axis working area: 4300 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 16 Fpjlov Sf Ixjhccqpsg

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle Fpelheugpwnjccqpjg No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 36784, BIESSE Rover 24 L machining center Composition: - X: 4500mm Y: 1300mm Z: 180mm - 4 Axes - BIESSE WORKS program - Spindles ISO 30-1 - Automatic Central System of lubrication - Total power 35kw - Vacuum pump of 250m3/h - ATS work table with 4 suction cup trolleys Felhccevz Utijqpspg -Predisposition for ATS vices and pliers -16 suction pads - Horizontal milling head 5 HP - Vertical and horizontal drilling block 16 chucks -Evacuation belt chip -Remote control of speed control, axis movement

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Fjlhccovazkfsqpepg

Condition: used, machine/vehicle number: 007703, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Felhccqevnw I Ajpepg Main Electrospindle power: 16 KW Number of controlled axes: 3 axes Total number of drilling spindles: 21 Total number of tool changer positions: 21

Condition: used, Year of construction: 2008, Biesse NBC 412 412 Automated cell for nestig complete with loading and unloading system & Rover A 3.40 FT Description: Rover A 3.40 FT Centralized automatic lubrication system 8 front stops + 8 back stops with sensors 1 Rh side stop with sensor Fpslhccqowh Sfzopjg Vacuum system for 2 300 m3/h pumps 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Boring head BH 18 A Revolver tool changer with 10 positions Numerical Control XP600 BiesseWorks - Advanced - machine and office version BIESSE NEST Module Arm for pieces loading and unloading, positioned on the machine beam Loading and unloading table, positioned on the LH side of the machining center CE Safety devices 2 m3/h rotary claw vacuum pump Mechanical presser ring with pneumatic lowering , for nesting based application (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: X-axis: 3,060 mm Y-axis: 1,260 mm Z-axis: 150 mm Work table: 6 ATS workpiece supports, each with 3 vacuum suction cups 6 rear workpiece stops, program-lowered, installed in one support each 6 front workpiece stops, program-lowered, installed in one support each, positioned approximately 970 mm from the rear 2 + 2 side workpiece stops 4 lifting rails, pneumatically program-lowered, for positioning heavy workpieces Vacuum pump 90 cbm/h Machining head equipment: Drilling head BH 21 L with: 14 vertical drilling spindles, each individually accessible 2 + 2 horizontal drilling spindles in the X direction Grooving saw, diameter 120° fixed in the X direction Fslhccqjwhw Ihspspg Milling spindle 12 kW, HSK 63 F Rotation speed 1,000 - 24,000 rpm Rotation right and left C-axis 360 degrees for adapter units 18-station tool magazine Safety features: * Safety mats in front of the machine * Protective grille on the left with access door XP 600 control system with NC HOPS 4 programming software Without tools and units Optionally available: * Adapter unit with lock case for door machining * Adapter unit with pivoting milling unit * Adapter unit with saw

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Folhccswbankjqpopg Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system (return system is not included) Fpjlhev A H Ubeccqpeg - Year 2019 - good condition - NC motors, all adjustable from PC control - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system • Scissors • Pressure zone 3 rollers • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer • Edge scraping unit • Glue scraping

Condition: not inspected (used), Code: 0470 Brand: BIESSE Model: ROVER 346 - Norme CE CNC working centre with 3 controlled axis for milling/drilling/forming of furniture, custom-made furniture, doors, panels, kitchens, bathroom furniture, wooden elements, plastics, composite materials - CE Standard Technical data: Sturdy structure with base consisting of two side uprights connected with an upper and lower beam Working range: X axis mm 3200 - Y axis mm 1325 Z axis stroke mm 130 Max panel passage thickness mm 115 Max programmable speed: X axis mt/min 76 - Y axis mt/min 75 - Z axis mt/min 15 Boring unit: N° 31 vertical spindles with centre distance mm 32 - N° 10 horizontal spindles for drilling on the 4 sides of the panel - Spindle rotation speed rpm 4000 Router unit: Electrospindle for vertical milling - Motor Hp 9 - cone attachment ISO 30 - rpm 1000-24000 Tool magazine for automatic 5-position tool change complete with cover Circular saw unit: Blade diameter mm 160 - Motor Hp 5 - rpm 12000 N° 6 manually positionable work tables with pneumatic clamping Ball bearing supports for panel movement Counter-shapes Vacuum pump 100 m/cubic metres Fpjlhsviv U Rsccqpog Numerical control CNI Installed power Kw 25 Compressed air 7 bar Overall dimensions: Machine mm 5730 x 1900 x 2480 h - Electrical panel mm 1100 x 650 x 2000 h Transport dimensions: Machine mm 5900 x 2250 x 2480 h - Electrical panel mm 1100 x 650 x 2000 h Weight kg 5900 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: used, machine/vehicle number: 007364, X axis working area: 3060 mm Y axis working area: 1320 mm Working Table: Pod and Rail Number of controlled axes: 4 axes Total number of drilling spindles: 20 Fjlhccjtz Hxaeqpspg Total number of tool changer positions: 10

Condition: used, Year of construction: 2006, Biesse Rover B 4.35 CNC Machine Description: Working fields: X = 3200 mm; Y = 1315 mm; Z = 150 mm Table type: Beam table (manually) 6 bars with 3 cups 1 milling motor Motor 9 kW Drilling unit: BH-17 Tool holder: ISO-30 Changer: 9 positions moving along Number of vacuum pumps: 1 Biesse Works Fpslhcjwgctgocqpjg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Y-axis: 60 m/min Z-axis: 20 m/min Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Drilling head: HSD  20 vertical spindles 4 horizontal grooving saw in X-axis grooving saw in Y-axis Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Tool magazines: 16-position turret magazine Fpslhccswhypnsqpsg Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: used, Year of construction: 2008, Working dimension X: 3.060 mm Working dimension Y: 1.260 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 18 Disc tool changer: Yes Fpelhccewh Dgqoqpsg Number of exchangeable units: 3 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 21 L: Yes Cantilever machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Pneumatic pipe connectors: Yes BIESSE Preparation for Uniclamp: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Special workpiece clamping system: For windows, For narrow workpieces, for frames BIESSE Uniclamp: Yes Safety device: Safety mat Interface for .dxf data: Yes BIESSE Remote control unit RM 850: Yes Automatic lubrication: Yes Control: BIESSE XP 600 Control cabinet cooling: Yes Software: DIREKT CNC ACADEMY, DIREKT CNC NC-HOPS Conformity marking: CE mark Weight: 3.200 kg

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Pre-milling unit Glue station for granulate Pneumatic guillotine pre-trimming the edge Folhewh Snisccqpepg Pressure zone with 2 rollers Precise trimming unit Top/bottom milling unit with profile cutters Profile scraper Flat scraper Polisher Set of spray fluids Year 2019

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 1000023497, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Fpelhccqequ St Ispog Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: used, machine/vehicle number: 006280, X axis working area: 3665 mm Y axis working area: 1260 mm Working Table: Flat table Fjlhccqekw H Egjpspg Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 18

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Fpolhccswgc D Eoqpjg

Condition: used, Year of construction: 2017, Functionality: fully functional, The high-performance Biesse STREAM A 5.0 edge bander is designed for precise and efficient edge banding in industrial furniture production. This model provides reliability, speed and high processing quality, thus meeting the requirements of even the most demanding customers. Technical specifications Edge material thickness (in rolls): 0.3–3 mm Maximum edge material thickness (in strips): 20 mm Minimum panel thickness: 10 mm Maximum panel thickness: 60 mm Minimum panel length: 140 mm Minimum panel width: 85 mm (with a panel length of 140 mm) Feed speed: up to 25 m/min Glue system: cartridge, PUR glue Weight: 3200 kg Fjlhccqov I S Dlopepg Key features Robust construction - ensures stable operation even under high loads. Precise edge banding - suitable for various types of edges (ABS, PVC, veneer). High speed and efficiency – ideal for industrial processing. Advanced extraction – minimizes waste and ensures a clean work area. Easy integration into the production line – compatible with modern automation systems. Machine composition Pre-milling unit: 2 motors with NC axis for automatic adjustment Gluing unit: system with pre-melting unit for granules Trimming unit: front and rear trimming units with tilting option Upper and lower milling unit: rough and fine milling with NC axes for precise adjustment Rounding unit: 2 motors with NC control for edge rounding Scraping unit: upper and lower profile scrapers with pneumatic exclusion Polishing unit: upper and lower polishing wheels for final finishing Interested in this machine? Contact us and we will be happy to provide you with more information!

Condition: used, Year of construction: 2012, Working dimension X: 3.280 mm Working dimension Y: 1.320 mm Working dimension Z: 170 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 22 Linear tool changer: Yes Disc tool changer: Yes Number of exchangeable units: 4 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: Unit, changeable Cantilever machine: Yes Machine table: Pod and rail table Folhccewhfdqjqpjpg Number of consoles: 6 Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Safety mat Two rows of stops: Yes Workpiece support aids: Yes Handheld terminal: Yes Control: BIESSE BH 660 Software: BIESSE BIESSEWORKS

Condition: ready for operation (used), Year of construction: 2008, ROVER A 3.30 K4 - CNC machining center Working area: X = 3060 mm; Y = 1260 mm; Z = 150 mm 9080345 Automatic lubrication system 6 ATS workpiece supports - L = 1200 mm - 18 module supports 6 stops with 115 mm stroke 6 stops with 15 mm stroke positioned 970 mm from the rear Side stops with 15 mm stroke, complete with pneumatic equipment Narrow part clamps 12 vacuum modules 132 x 146 x H48 mm 6 vacuum modules 132 x 75 x H48 mm Chip conveyor belt integrated into the machine bed Fpjlowdnqxshccqpsg Vacuum pump 250 m3/h Auxiliary vacuum system Flange for preparing a milling spindle for use with an angle unit 360° C-axis Drill head BH 21 L Turret tool magazine with 18 pockets Remote control functions CNC control XP600 Graphical operator interface BIESSEWORKS Air conditioning system Safety devices with two front safety mats and rear and side protective grilles 7350283| Division of the vacuum system into two independent work areas in X. Division of the pneumatic system into two work areas in X. 7300510| Chip conveyor belt integrated into the machine bed 50820 250 m3/h vacuum pump instead of the 90 m3/h pump WORK UNITS 7212013| 360° rotating work unit (C-axis) with gear drive, for machines with preparation 7212006| 12 KW (16.1 HP) electric spindle with HSK F63, air-cooled NC-Hops 4-axis machine license version 4 The tool shown is not included in the scope of delivery. Location: from customer location - Available: end of May 2025 -

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Folopz Shkshccqpepg Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 36901, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, nominal power (apparent): 28 kVA, controller model: Biesse Works, spindle motor power: 1,500 W, number of spindles: 1, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is in good condition. 2 years ago had a general renovation. 8 panel supports 1525mm length, 24 sliding bases Drilling Unit, BH 22L 250m3 Vacuum pump 5-axis, 15 kW Electrospindle with HSK63 adapter, liquid cooled Works with HSK63 Fpelewfri Ujhccqpeg Safety fence and carpets Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas Pneumatic system for lifting bar supports Revolving tool changer with 10 places Automatic lubrication system Set of tools. Machine is on site, working.

Condition: used, BIESSE ROVER35XL MACHINING CENTER Automatic bridge and suction cup movements 2 router heads, vertical and horizontal drilling 2 tool changers 4th axis tooling included Felhjwcl Tbsccqpepg

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Fpjlhev A Ainoccqpog Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg