Used Biesse Stream B for sale (8)

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Fedpfxsl Txw He Ah Ijpr Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: new, Year of construction: 2024, functionality: unexamined, machine/vehicle number: 1000065502, Single Sided Edgebander Stream B 9.5 with: premilling unit, gluing unit with EVA-EVA REAL TIME GLUING SYSTEM WITH PRE MELTER (dual EVA gluing system consisting of two independent glue heads tahat allows for real time colo switching without the need for manual glue head changes), 6 position edgebanding containers, edn trimming unit, rough milling unit, fine trimming unit, corner rounding unit, universal milling unit, edge scraper, glue scaper, brushing unit, phon. Fjdpfx Asxyf Nzeh Ijpr

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Fjdpfsx A Tzqox Ah Ispr Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Fedpfx Ahex Dipmo Iopr Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Position 3: Single Edgebanders BIESSE-STREAM B1 9.0

Condition: used, Year of construction: 2009, Numerical Control Sintra Fpsdpfxsh Uhxne Ah Ior Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Grinding group Coil holder magazine with 2 positions with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Predisposition for gluing unit for PUR glue Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Refilling unit with 2 superimposed motors Gleaning unit with 2 tilting motors Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Non-stick group Adjustable edge scraper group Glue scraping unit Oscillating brush group

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1000004052, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology Fpjdpfx Ahsu Suh Sj Ior feed rate 1-25 mb/min wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm line composition - 2 milling heads height 44mm - EVA / PUR overlay unit - AIR FORCE - drills - pre-profile cutters - rounders - groove saw - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Fedpfoxw T Tpox Ah Iepr Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: good (used), Year of construction: 2014, functionality: fully functional, feed rate X-axis: 24 m/min, edge thickness (max.): 3 mm, product height (max.): 60 mm, product height (min.): 10 mm, product length (min.): 150 mm, product width (max.): 3,200 mm, product width (min.): 100 mm, TECHNICAL DETAILS Type of edge applied: thin edge, thick edge Gluing system: EVA Joint milling: yes Fpsdpev Eabasfx Ah Ier Multifunctional unit: yes Number of working units: 8 nr Software: SINTRA Advance speed: 25 m/min Panel dimensions Panel height: 10 - 60 mm Panel length: min. 150 mm Panel width: 100 - 3,200 mm Edge thickness: 0.3 - 3 mm Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Model manufacturer: RT30 Automatic intervention by time: yes Speed: 9,000 rpm Edge processing systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 6 Gluing system: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Prefusor model: HM20 Press roller conveyor edge: yes Number of press rollers: 4 With positioning of NC: yes Assembled units in the part of edge processing 1-6 Unit 1: Head processing Model manufacturer: IT90-S Processing speed: 28 m/min Speed: 12,000 rpm Unit 2: Edge milling machine Model manufacturer: RF10 Speed: 12,000 rpm Unit 3: Multifunctional unit Model manufacturer: AR30 Automatic tool change: yes Processing speed: 18 m/min Speed: 12,000 rpm Unit 4: Edge scraper Model manufacturer: RB40 With positioning of NC: yes Aggregate 5: glue scraper Model manufacturer: RC20 Aggregate 6: brushing aggregate Model manufacturer: SZ30 Speed: 1,400 rpm Additional systems Spray aggregate: yes CE marking: yes MACHINE DETAILS Total installed power: 25 kW Conveyor and return system Drive speed: 24 m/min Parts return for edge banding machine: left Panel ejection: transfer roller conveyor Panel drive: motorized carpet