Used Bystronic Laser Cutting Machine for sale (162)

Condition: good (used), Year of construction: 1997, Lifting capacity: 1.300 kg Max. sheetsize: 4.000 x 2.000 mm Kodpfxowavuke Ai Rjdr No. of cups: 19 pieces Size LxWxH: 480 x 200 x 250 cm Weight: 1.400 kg

Year of construction: 2007, condition: ready for operation (used), Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible. Kjdsyttwuspfx Ai Rsdr

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Kdjdpfx Aszlt Aysi Rer This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION - Condition: Used. Functional scope as per the technical data below. - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA Kjdpeydq Hnofx Ai Rjdr - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. Kdsdezcwupspfx Ai Ror The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Year of construction: 2018, condition: used, Used Bystronic Bystar 3015 fiber 10kw cnc laser cutting machine for sale Year: 2018 Technical specs / Details table length: 3000 mm table width: 1500 mm burner heads: 10,00 Watt / 10kw The machine is still under Bystronic uk warranty which is into 2021 Complete with: Auto focus Auto nozzle centering Nominal sheet size xy: 3000 x 1500 mm Cutting area xyz: 3048 x 1524 x 70 mm Positioning accuracy Pa: +/- 0,1 mm Repeatability Ps: +/- 0,05 mm Maximum workpiece weight: 890 kg Operation via panel: ByVision Touchscreen and manual control unit Sheet automation / loading arm / Bytrans not included. Ksdpfx Aisf Arzmj Rsdr Many used sheet metal fabrication machinery for sale including pressbrakes.

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Kdsdpfjylx Hrex Ai Rsr

Condition: new, Year of construction: 2019, Hello, for sale is a new spare part for a Bystronic table: CUTTING HEAD HUB10 ART. B-017530-V03-A. Kedpeygl Dtefx Ai Rodr

Condition: used, Year of construction: 2015, Bystronic CO2 laser with 6000W laser power including automation and storage system. Automatic pallet changer Byvision cnc control Automatic nozzle centering Regulated Pulse Piercing Nozzle cleaning Collision detection Cooling unit Filter unit More info and videos available on request. Viewing possible upon appointment. Immediately available. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Kdjdpfx Aezdtyiji Rsr Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 3000 x 1500 mm Laser output: 6000W Automation (sorting and storage): ASTES4SORT (12 positions) Storage: TRAFO (12 storage positions) Power on: 41643h Cutting hours: 25394h

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 35,509 h, machine/vehicle number: R1119022, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: P8005A, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 4400, laser hours: 35,509 h, laser power: 4,400 W, laser wavelength: 10 nm, Offered is a laser source from Bystronic (ByLaser 4400). All maintenance and repairs were performed by Bystronic. Operating hours may change as the machine including the laser source is in daily operation. Handover is by arrangement, dismantling is the buyer's responsibility. Parts can also be sold individually as spare part donors. Kdedpfoy Rzg Tox Ai Rjr

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Kdodpfx Aisyxqzvo Rer Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Complete with extended daylight and stroke Pr200 200 x 4100 Make: Bystronic Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Ksdpjzcw Uvefx Ai Rodr Bending cycle 10mm/s Rapid return 150mm/s

Condition: ready for operation (used), Year of construction: 2017, laser power: 4,000 W, overall weight: 14,250 kg, This BYSTRONIC Bystar Fiber 4020 fiber laser cutting machine was manufactured in 2017. It boasts a laser power of 4000W and can handle sheet sizes up to 4000x2000 mm, with a maximum sheet weight of 1900 kg. This robust machine is perfect for high-precision cutting tasks. The BYSTRONIC Bystar Fiber 4020 machine we have for sale represents an excellent opportunity for efficient and precise cutting operations. Reach out for further details regarding this fiber laser cutting machine. Machine Benefits Qualitative Machine Benefits Kodpfx Aezvvv Dji Rsdr • Capable of handling heavy and large materials, enhancing cutting versatility. Technical Machine Benefits • Max sheet size: 4000x2000 mm • Max sheet weight: 1900 kg • Powerful laser and large cutting area for efficient operations.

Condition: used, Year of construction: 2021, Outstanding Bystronic fiber laser with 10000W laser output, automatic loading station and 2 storage towers. Can be inspected under power upon appointment. Availability: 10/2026 Including: Automatic nozzle change (64 nozzles) Detection camera Kerf scan Cut control Kjdoy T Nc Uopfx Ai Rodr Automatic centering of laser beam and nozzle Linear axes Full technical specifications available on request. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 3000 x 1500 mm Laser output: 10000W Automation: ByTrans Modular 3015 Flex + Antil AWL9 2T (V1) cutting hours: 6105h

Condition: excellent (used), Year of construction: 2012, tonnage 100 T Folding length 3100.00 mm guarding AKAS FIESSLER machine mounted laser guards CNC Cybelec 880s Throat 250.0 mm Kdodpeztl Nzefx Ai Rer Vertical stroke 200 Working speed 100mm per/sec Axis number 4 Motor power 11.0 kW ----- Weight 9000.0 kg condition excellent can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Kdsdpfx Aiezta A Aj Ror Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: used, Year of construction: 2022, Excellent ByStar 4020 fiber laser with 15kW laser output and ByTrans Extented automation. Kodpfxey Erfvs Ai Rjdr Including nozzle changer, Mixgas and outdoor version of dust extraction. Viewing possible upon appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 4000 x 2000 mm Laser output: 15000W Automation: ByTrans Extended Power on hours: 5734h Cutting hours: 1570h

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Kedpfx Aozun T Sji Rodr

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Kedpfx Aiex U Dwps Rodr

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input current: 125 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Bystronic / Hegla laminated glass (VSG) cutting system Speedcut and ProLam 3700, comprising of following components: - Speedcut float glass cutting table with tool changer and second cutting oil circuit, flat belt conveyor and air cushion, with 2 special cutting heads for laminated glass cutting (lower cutting head can be deactivated for float glass cutting) - Hegla conveyor belt TW 7833 RW - Hegla cross-cutting station STB I 33 Kdodpfx Aiezu Ayye Rer - Hegla laminated glass cutting bridge ProLam 37 , including a traverne rotation device, remote maintenance via the internet using VPN, including software - Hegla air cushion table LTR 3034, with 4 support arms The entire plant is in excellent condition and will be available EXW from its current location from the end of December 2026.

Condition: used, Year of construction: 2018, machine/vehicle number: 1743, functionality: fully functional, operating hours: 36,725 h, power: 6 kW (8.16 HP), table width: 2,000 mm, table length: 4,000 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 14,250 kg, Condition The machine is in used, fully functional condition and is currently still in operation. No known defects are present. Scope of supply The scope of supply includes: ByTrans loading system for automatic loading and unloading Existing documentation and operating manual Kedszhmh Iepfx Ai Rsdr Small quantity of wear parts Location and inspection Location: ASCO Anlagenbau Inspection: Possible by appointment Loading: Possible Availability: By agreement

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, pressing force: 150 t, stroke length: 215 mm, reverse speed: 150 mm/s, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Machine Specifications Manufacturer: Bystronic Beyeler Model: PR 150 (Pressure Reference) Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition. Kdjdpfezpxt Eox Ai Rer

Condition: ready for operation (used), Year of construction: 2006, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 3, This 3-axis Bystronic Bysprint 3015 CO₂ laser cutting machine was manufactured in 2006. It features a working area of 3,000 × 1,500 mm and includes an automatic table changer and two cutting heads. The machine has a maximum cutting capacity of 12 mm for stainless steel and 20 mm for mild steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint 3015 machine we have for sale. Contact us for further details. • Working area: 3,000 × 1,500 mm • Cutting heads: 2 (5" and 7.5") • Features/Options: Cut Control; Adaptive mirror bypass; MCS; STL • Resonator: Included • Cutting-head cooling system: Included • Original turbine operating hours: Approx. 7,000 hours • Maximum cutting capacity: • Mild steel: Up to 20 mm (continuous operation) Kdsdpfxszq Ap Tj Ai Ror • Stainless steel: Up to 12 mm • Aluminium: Up to 6 mm Additional equipment • Automatic table changing system • Fume extraction system • Machine manuals

Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, pressing force: 400 t, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Overview Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100Bending Capacity: 400 Tonnes Bed Length: 4100 mm (4.1 Metres) Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Kodpfx Aszl D Efji Rodr Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation.

Condition: ready for operation (used), Year of construction: 2016, controller manufacturer: BYSTRONIC, controller model: ByVision, laser power: 4,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 70 mm, positioning accuracy: 0.1 mm, overall weight: 12,000 kg, total width: 6,051 mm, total height: 2,565 mm, product length (max.): 11,018 mm, table load: 890 kg, number of axes: 3, This 3-axis Bystronic BySprint Fiber 3015 incl. ByTrans Extended Loading/unloading system was manufactured in 2016. It features a powerful 4000 W fiber laser source and a working area of 3048 mm x 1524 mm. The machine includes an automatic shuttle table system and a fully enclosed safety cabin, ensuring efficient and safe operation. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 3015 machine we have for sale. Contact us for further details. Bystronic BySprint Fiber 3015 incl. ByTrans Extended Loading/unloading system * Laser Source: Fiber 4000* Laser Technology: Fiber Laser* Laser Power: 4000 W* Pulse Frequency: 1–2500 Hz* Power Control Range: 400–4000 W* Sheet Size (X): 3000 mm* Sheet Size (Y): 1500 mm* Maximum Positioning Speed X/Y: 100 m/min* Maximum Simultaneous Positioning Speed: 140 m/min* Position Accuracy (VDI/DGQ 3441): ±0.1 mm* Repeatability (VDI/DGQ 3441): ±0.05 mm* Edge Detection Accuracy: ±0.5 mm* Maximum Workpiece Weight: 890 kg* Shuttle Table Change Time: 35 s* Maximum Mild Steel Thickness: 20 mm* Maximum Stainless Steel Thickness: 15 mm* Maximum Aluminium Thickness: 15 mm* Maximum Brass Thickness: 8 mm* Maximum Copper Thickness: 8 mm* Total Power Consumption (including extraction and chiller): 25.3 kW Kjdpfozpxrbex Ai Rsdr Equipment & Features * Automatic Shuttle Table System with 2 Shuttle Tables* Fully Enclosed Safety Cabin* Chip Trolley with Rollers* CNC Control Cabinet* Touchscreen with ByVision User Interface* Maintenance Messenger* Restart Manager* System Manager* Handheld Control Unit* Cutting Parameter Assistant* Uninterruptible Power Supply (UPS)* Cutting Bridge* Cutting Head* Piercing Jet* ByPos Fiber* Automatic Nozzle Cleaning* Scanning Function* Fiber Laser Source* Tank Heating* Tropicalization Package* Standard Extraction Unit 3000* Automation / Handling Interface* Chiller for Fiber 4000* Operator Protection in Cutting Area* Operator Protection in Loading / Unloading Area* Power Supply: 400 V / 50 Hz* Electrical Connection (Machine incl. Laser Source)* Compressed Air Connection (Machine incl. Laser Source and Chiller)* Material Specification Package* Part Tolerances and Cut Surface Quality Package* Cutting Gas Supply and Cutting Quality Package* Environmental Requirements Documentation* Building Requirements Documentation* Machine Documentation* STL Cabinet Additional Equipment * ByTrans 3015 Extended Loading / Unloading System* 2 Cassettes with Copper Supports* Additional Suction Unit for Sheet Separation* Cut Control Fiber* Special Position of the Control Cabinet* Automatic Nozzle Changer with 40 Positions* Second Operator Console* Observer Hardware* OPC Interface Cutting