Used Bystronic Laser Cutting Machine for sale (156)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10046216, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 4,000 mm, table width: 2,000 mm, TECHNICAL DETAILS Travel Paths X-Axis: 4,000 mm Y-Axis: 2,000 mm Z-Axis: approx. 150 mm Cutting Area Cutting area: 4,000 mm x 2,000 mm Max. cutting pressure: 3,800 bar Iodswy Nm Hjpfx Ad Detp Control System: Bystronic CNC control MACHINE DETAILS Pump type: High-pressure intensifier pump Drive system: High-speed linear drives Material capability: Cuts nearly all materials Cutting method: Pure water or abrasive waterjet cutting Table type: Stainless steel slat cutting table Weight: 13,000 kg EQUIPMENT High-pressure pump unit Water filtration system Operator console with control panel Safety enclosures and light barriers Operating manuals + software CD-ROMs Documentation

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working height: 2,700 mm, Equipment: documentation/manual, Glaston-Bystronic 2700 mm Gas Press ZPG 2700 x 3500 VR SP 1 AS 15–60 mm 1000 kg Iodpsvuhflsfx Ad Dotp year of manufacture 2011 Optional complete line available

Condition: good (used), Year of construction: 1997, Lifting capacity: 1.300 kg Itsdpfowavukex Ad Dsp Max. sheetsize: 4.000 x 2.000 mm No. of cups: 19 pieces Size LxWxH: 480 x 200 x 250 cm Weight: 1.400 kg

Condition: good (used), Year of construction: 2007, operating hours: 23,504 h, functionality: fully functional, machine/vehicle number: W371, Bystronic 4-head system, including two hydraulic pumps and exchange table Working area: 3,000 x 1,500 mm All heads are operational Including drilling axis Conversion from scraper conveyor to sludge removal system Further information can be obtained by phone! Ijdpfxewzwgwj Ad Detp

Condition: excellent (used), Year of construction: 2008, Laser ByVention 2200 W Bystronic Year 2008 sheet size 1500x3000mm Iodpfx Ask E Tp Ejd Detp Sheet fed from the rear of the machine Maximum size of the cut object is about 1500x770mm The laser is operational, serviced, dismantled and ready for transport

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 30,000 h, machine/vehicle number: R0711633, laser power: 12,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, cutting speed: 12,000 mm/min, workpiece weight (max.): 890 kg, input voltage: 360 V, type of input current: three-phase, overall weight: 7,000 kg, total length: 12,500 mm, total width: 2,500 mm, total height: 2,150 mm, working range: 3,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, Laser Retrofited Bystronic Bystar/Bysprint 3015 to Fiber 12Kw. Ijdpfoulwxlox Ad Dotp

Condition: excellent (used), Year of construction: 2011, operating hours: 1,934 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, water pressure: 3,600 bar, TECHNICAL DETAILS Operating hours: 1,900 h X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 200 mm Water pressure: 3,600 bar EQUIPMENT - Two cutting heads for simultaneous processing - Drilling head for piercing holes 2 mm (e.g. MAX plates) - Glue gun for small parts - desludging unit in BIG Pack Itedsvfm T Nepfx Ad Djp - Bysoft6 software

Condition: used, Year of construction: 2004, Bystronic laminated glass cutting table Lamicut 3700mm S-CUT-1212 Itsdevzhh Hspfx Ad Dsp

Condition: good (used), Year of construction: 2005, Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg Itjdpstwpatefx Ad Djp

Condition: used, Bystronic Lenhardt Inspection & frame position station V/R-RL 1.6 x 2.9 - 2900 mm long Transport dimensions: Inspection zone W 1230. H2410. L 3910. Outlet W 900. H2100. L 1310 S-IGL-1952 Bystronic-Lenhardt / ZP 1.6x2.5 VR SP G Iodevy Eyqspfx Ad Dstp Conveyor with air-cushion support TB-V-LK 1.5 x 1.3, 1300 mm long + Gas-filling & press robot ZP 1.6 x 2.5 VR SP G 1 AS, spindle driving, 2700 mm long / S-IGL-1953

Condition: excellent (used), Year of construction: 2012, back gauge travel distance R-axis: 2,700 mm, Bystronic ZPG 2700x3500 VR SP 1AS Isdpfjvy Enzex Ad Detp 2011 2300 x 4500 mm 15 mm 60 mm 1000 kg S-IGL-2284 R-L

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, working height: 950 mm, conveyor belt speed: 833 mm/s, conveyor belt thickness: 7 mm, cylinder diameter: 190 mm, TECHNICAL DETAILS Itjdpfxsxur Aws Ad Djp Working dimensions: 70 - 4000 mm Leg length: 5.0 mm to 12.0 mm Profile height automatic: 4.0 mm to 24 mm Profile height manual: up to 35 mm Butyl cylinder Butyl cylinder diameter: 190 mm Butyl cylinder length: 250 mm Butyl cylinder volume: 7.5 l Operating temperature butyl: 100°C to 140°C MACHINE DETAILS Working height: 650 mm to 950 mm Conveyor belt height: 0 mm to 7 mm Conveyor speed: 5 m/min to 50 m/min Connected load: 5 kW Compressed air consumption (for 1 m × 1 m frame): 23 standard litres Air consumption when refilling butyl: 300 standard litres/min Pneumatic input pressure: 6.5 bar to 8.0 bar Pneumatic operating pressure: 6.5 bar Maximum butyl extrusion pressure: 280 bar Maximum operating pressure: 300 bar EQUIPMENT Butyl cylinder Conveyor belt Pneumatic system

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, BYSTRONIC XACT SMART 225/4100 PRESSBRAKE CAPACITY 4100 MM X 225 TON Ijdpfx Adowxykaj Dstp YEAR 2017 TOOLING FULLY GUARDED CNC CONTROL THIS MACHINE HAS JUST BEEN PURCHASED AND DUE WITH US IN THE NEXT WEEK . WE HAVE 2 MACHINES AVAILABLE IDENTICAL .

Condition: used, Year of construction: 2013, Bystronic fiber laser with automation in very good condition. Can be inspected under power upon appointment. Availability: 11/2025 Iedjxxyrzopfx Ad Djtp More information available on request. Laser output: 4000W Working dimensions: 3000 x 1500 mm

Condition: excellent (used), Year of construction: 2000, System for glass sizes up to: Height 3200 mm, length 5500 mm. Double/triple glazing. Max. package thickness: 57 mm. Main components of the system: Washing machine with water treatment, inspection station, gas filling press, cork applicator, automatic sealing. System cannot handle stepped elements. Total length of the system: approx. 35 m. Condition: very good, used Itsdpsxpnfqjfx Ad Djp

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Ijdjd N Erpjpfx Ad Dotp Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2013, Bystronic Xpert 320/4100 Press Brake with ByVision Bending 2.1.0 Touch Screen Control, Working Length 4300mm, Max Press Force 3200kN, Max Stroke 365mm, Rapid Approach 190mm/s, Working Speed 10mm/s, Return Speed 150mm/s, Machine Weight 22,800kg, Bystronic Laser Eye. S/No. 13560003 (2013) - CE Mark Itsdpext N A Eofx Ad Dop Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Iodpfegkgwfjx Ad Dstp Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: good (used), Year of construction: 2015, Lifting capacity: 500 kg. Dimensions of the goods: Width: 2300 mm. Height: 1600 mm. Depth: 320 mm. Weight: 80 kg. Itsdpexw H E Sefx Ad Djp Condition: good, second-hand.

Condition: used, Year of construction: 2019, Bystronic Xpert 100/2050 Hydraulic Press Brake with ByVision Bending 3.5.0 Touch Screen Control, Working Length 2050mm, Max Force 1000kN, Max Stroke 215mm, Machine Weight 7800kg. S/No. 19520007 (2019) Iedpfxext Nmkj Ad Dotp Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, working width: 4,100 mm, number of axes: 6, type of crowning: CNC-controlled, back gauge adjustment: CNC-controlled, pressing force: 220 t, Used High quality fully serviced Bystronic 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2018 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen Fully serviced with Bystronic uk Itjdpfxswth Eze Ad Dop 2 available year 2018 and 2016

Condition: good (used), Year of construction: 2015, Lifting capacity: 500 kg. Dimensions of the goods: Width: 2350 mm. Iedpfxoxw H Erj Ad Djtp Height: 1200 mm. Depth: 250 mm. Weight: 75 kg. Condition: good, second-hand.

Condition: like new (used), Year of construction: 2006, Used high quality Bystronic PR320 6 axis 4 metre x 320 ton CNC down stroke hydraulic pressbrake for sale Edwards Pearson / Bystronic – fully serviced with Bystronic uk as per photo Isdpfeip Np Hox Ad Dstp Model: PR 320 x 4100 / Beyeler PR320 Working length 4100mm Max. press force 3200kn Max stroke 265mm Rapid approach 190mm/s Bending cycle 10mm/s Rapid return 150mm/s 320/4100 free standing CNC Pressbrake 6axis / 6 axes: Y1 – Y2 – Z1 – Z2 – X – R Year 2006 Complete with: Cybelec ModEva 10s Hydraulic tool clamping 4 axis back gauge Crowning Hydraulic tool clamping No pit required Delivery and installation in your factory complete with warranty and tooling can be arranged

Condition: good (used), Year of construction: 2015, Lifting capacity: 500 kg. Dimensions of the goods: Width: 2350 mm. Height: 1200 mm. Iedsxw H D Ispfx Ad Dstp Depth: 250 mm. Weight: 75 kg. Condition: good, second-hand.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, working width: 4,100 mm, pressing force: 150 t, working range: 4,100 mm, Used high quality very accurate Edwards Pearson PR6 150/4100 CNC Pressbrake for sale New / Year 2002 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 150ton / 4100mm x 150ton Fully serviced Very late Pr machine before Bystronic pressbrakes Complete with with: Cybelec CNC Control with Colour Graphics Itodov Ub Elopfx Ad Dop  Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full Top and Bottom Tooling Has come from a company that manufacture’s for the architectural sector and has mainly been folding aluminium New tooling to fold your products on this press available Can be seen working