Used Dmg Machining Center for sale (385)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,806 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, workpiece height (max.): 630 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 4-axis DMG MORI CMX 600 V was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 560 mm and can accommodate a maximum workpiece weight of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 600 V vertical machining centre we have for sale. Contact us for further details. Bljdpfx Aljzbifwedoh • Table size: 900 x 560 mm • Max workpiece length: 900 mm • Max workpiece width: 560 mm • Max workpiece weight: 600 kg • Connected load: 32 kVA • Supply voltage: 400 V, 50 Hz Additional equipment • Lehmann NC rotary table (4th axis) Technical Specification Taper Size HSK 40

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,030 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,000 W, total height: 2,100 mm, total width: 1,900 mm, overall weight: 5,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, product length (max.): 4,400 mm, number of axes: 4, This 4-axis DMG MORI CLX 450 V4 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details. • Working range: • Max. turning diameter: 400 mm • Max. turning length: 800 mm • Swing over cross slide: 320 mm • C-axis: full interpolation • Main spindle: • Spindle nose: A8 • Spindle motor power: approx. 22/18 kW • Turret and tools: • Turret: 12 stations • All stations with driven tools • Performance: • Rapid traverse (X/Y/Z): approx. 24 / 10 / 30 m/min • Equipment: Tailstock • Power supply: 400 V / 50 Hz • Condition: Checked by DMG service before disconnection; very good condition with all functions working properly. Service report available for review. Additional equipment • Turning tools installed on the machine and included in the offer. Technical Specification Counter Spindle No Bedjzbcp Njpfx Aldolh Driven Tools Yes

Condition: used, Year of construction: 2009, turning diameter 465 mm turning length 1050 mm Bedpfx Alezaf Ewedslh control Heidenhain x-axis 300 mm weight of the machine ca. 7600 kg

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 DSL - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpm Movement X/Y/Z : 2600/1100/900 mm Tool holder : SK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl - Celos Travel ranges X/Y/Z:2,600/1,100/900 mm Spindle speed:20,000 rpm Tool holder:SK 40 Bljdpfx Aljzbgcgsdjh Spindle: Technology:Direct drive spindle Speed:20,000 rpm Max. power:35 kW Max. torque:120 Nm Tool holder:SK 40 NC swivel head: Technology:Swivel axis (B-axis) Travel range:+/- 100° Work table: Technology:Fixed table with integrated NC rotary table Total clamping area:3,200 x 1,100 mm Total table load capacity:4,000 kg/m Clamping area of NC rotary table:1,050 mm Max. table load capacity of NC rotary table:1,200 kg/m C-axis:360° Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper with ATC shuttle Max. tool diameter:130 mm Max. tool length:300 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:CTS system, 80 bar Tool measurement:BLUM laser Workpiece measurement:Heidenhain TS 460 Kinematics measurement:3D quickSET ready Emulsion mist separators:2 units, mechanical Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel

Condition: like new (used), Year of construction: 2017, operating hours: 515 h, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,610 mm, total width: 2,260 mm, torque: 240 Nm, overall weight: 3,400 kg, This machine is still in operation in a training workshop and is in like-new condition. Spindle hours: 564 Extensive accessories: Clamping devices, jaws, driven and fixed tool holders, as shown in the images in the advertisement. CNC universal lathe NEF 400 V3 3D control Siemens SL Operate CELOS Internal clamping device 3-jaw chuck BBD210-66 Set of soft top jaws, 3 pieces Coolant spray gun Main spindle reduction sleeve Design variant "BLACK" Hydraulic unit Foot switch for tailstock operation Technology cycle, alternating speed Bledszaaq Ijpfx Aldsh Documentation in German NETSERVICE (CELOS) SERVICE AGENT (CELOS) MESSENGER (CELOS) Programming/training software Sinutrain oper. for 6 participants DMG MORI training box for turning CNC control: 👉 Siemens SINUMERIK 840D sl 👉 Siemens SINUMERIK 840D sl User interface: 👉 CELOS (DMG MORI) Programming: 👉 ShopTurn (dialog programming) Under "Documents" you will find technical data in PDF format, a brochure for the control system, and other PDFs about transport.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits Blsdpfex Nr T Ujx Aldeh • 12-position tool turret with driven tools at all stations Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,064 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, spindle speed (max.): 8,000 rpm, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits Bodpoyaaugsfx Aldjlh • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 • Spindle power: 44 kW (40% duty cycle) or 32 kW (100% duty cycle) • Maximum torque: 1241 Nm (40% duty cycle) or 827 Nm (100% duty cycle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit Bjdpfxoy Uvnye Aldelh

Condition: good (used), Year of construction: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Bjdeiihxhjpfx Aldslh Complete machine documentation and data backup available. Good general condition.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 27,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, overall weight: 21,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. • Working table: • Number of pallets: 2 (working/preparation area) • Pallet clamping surface: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Movements: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Position tolerance (X/Y/Z): 0.006 mm • Position tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max diameter: 1000 mm • Max height: 1600 mm • Max weight: 2000 kg • Spindle: • Torque: 119 Nm (40% ED) • Tool changer: 60 positions • Coolant system: 980-litre high-pressure through-spindle with paper band filter • Availability: In excellent condition, available for demo (video available) Additional equipment • 7 extra pallets • Chip conveyor • Oil mist collector • Infrared measuring sensor • BLUM laser tool measurement • 3D Quick Set preparation • Cooling unit • Air blast through spindle • Maintenance kit (filters, wipers, installation tools) • Full manuals (English, Estonian, and digital copy) Bljdpox D Eh Ejfx Aldoh

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bjdpfoza Alhex Aldjlh CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Bodpfoy U Hklsx Aldolh Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Bljdpoy U Hkfofx Aldjh Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Blsdpfsy U Hh Dox Aldeh Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2020, operating hours: 17,031 h, machine/vehicle number: 00830004341, Catalog No.: 2.2, as a twin-spindle machine, SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% ED), largest turning diameter: 360 mm, largest turning length: 1,200 mm, bar capacity: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine positions, Y-axis travel: +/- 120 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: hydraulic self-centering steady rest (25-199 mm), counter-spindle with tailstock function, fine chip removal system for cast iron machining, groove milling function, connection to central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Blodpjy T Nw Eofx Aldsh

Condition: used, Year of construction: 2020, operating hours: 13,641 h, machine/vehicle number: 00820028701, Catalog No.: 2.3, as a twin-spindle machine, with SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% duty cycle), largest turning diameter: 360 mm, largest turning length: 800 mm, bar passage: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine slots, Y-axis travel: +/- 100 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: counter-spindle with tailstock function, groove stop function, connection to a central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Bjdpfxsy T Nxco Aldslh

Condition: used, Year of construction: 2023, operating hours: 7,103 h, machine/vehicle number: 0031001593C/3984914, Internal No.: 2.4, Speed: 4,000-5,000 rpm, Weight: 6,400 kg, Maximum turning diameter: 200 mm, Maximum turning length: 1,000 mm, Spindle bore: 65 mm, CNC control: DMG MORI SLIMline Sinumerik 840 D Solutionsline, 16-position tool turret with driven tools: 5x radial, 6 (8) radially or axially driven tools, Y-axis +/- 600 mm, Counter spindle, 1 chip conveyor DMG MORI MTR032-23, with 1 automated bar feeder BREUNING, Type: Irco ILS-MUK-10012-III, Year of manufacture: 04.2023, Machine No.: 74 112 287, Weight: 850 kg, Subject to prior sale. Bsdjy T Nw Sopfx Aldslh

Condition: used, Year of construction: 2010, turning diameter 700 mm turning length 1250 mm control Siemens 840 G Ergoline spindle passage 104 mm spindle speed: 4000 spindle motor 35/45 kW max. torque on the spindle 600/700 Nm Spindlespeed subspindle 4000 U/min milling head -swivable ° turning speed range - milling 00 U/min tool taper Capto C6 tool magazin: 36 y-axis +/- 200 mm mm weight of the machine ca. 18,5 t Used CNC- Lathe with sub- spindle and milling head - milling head full axis + 1° clamping - chipconveyor - aircondition for elextric box Bsdpfx Ajy T R Rmeldjlh - new milling spindle in 2025 - absolute scale X/Y/Z1 axis - Shop Mill dialig programming - 8/20 bar coolant programmable - band filter system - Bar package (Partscatcher, prepared for ba magazin) Machine sold without jaws.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling Bsdpfow S Efzox Aldjlh The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2003, Machine hours: 1,594 h Technical specifications: Swing over bed: 320 mm Swing over face: 150 mm Clamping width, approx.: 800 mm Bjdswlhn Hopfx Aldslh Lathe chuck: 200 mm Lathe spindle size: 6 Spindle mount: MT 6 Speed range: 14 - 3,550 rpm Cross travel: 185 mm Spindle bore: 52 mm Quill: 70 mm Quill mount: MT 5 Quill stroke: 120 mm Max. torque: 32 Nm Gear ratios: 2 Drive power: 7 kW Multifix tool carrier: size B Dimensions (L x W), approx.: 2,600 x 1,440 x 1,800 mm Weight, approx.: 1,500 kg Control system: SINUMERIK 810DE-L CCU0 (Cycles for taper turning and thread machining

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,748 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,650 mm, total width: 2,530 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 20, product length (max.): 2,050 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details. • CNC control: electronic handwheel • Operating hours: Power on approx. 13,550 h; Spindle cutting approx. 1,748 h • Table: 790 × 560 mm • Spindle: 12,000 rpm; SK40 / ISO40; Power approx. 13–17 kW • Tool magazine: 20 positions; Automatic double‑arm tool changer • Feed rates: Rapid traverse 30 m/min • Coolant: Flood coolant system • Drives: Digital AC servo drives Blodoy T R I Espfx Aldoh • Electrical: 400 V / 50 Hz / 3‑phase; Rated power 17 kVA • Other: Machine connected and under power; very low spindle cutting hours for the year; good technical condition Additional equipment • Scraper-type chip conveyor • Discharge height: 950 mm • Tank capacity: 200 l • Coolant spray gun for swarf removal • Standard 4-color signal lamp • PROGRESSline & Planolight package Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, bar passage: 65 mm, overall weight: 9,500 kg, 3 TURRETS – Y-AXIS IN THE UPPER TURRET – 2 X-AXES – LNS SERVO 3 SHORT BAR FEEDER – EXCELLENT TOOLING – FANUC 310 CONTROL – IMMEDIATELY AVAILABLE Bljdpey Uxx Iofx Aldjh

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 925 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 3, This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details. • Spindle operating hours: 38,984 h • Axis travels (approx.): X 925–1100 mm; Z 300–350 mm; Y (optional) ±90 mm • Chuck diameter: 250 mm • Turret: 12 positions • Workpiece capacity (model typical): Max diameter approx. 350 mm; max length approx. 200 mm; max weight typically 100–300 kg (depending on setup) • Current configured workpiece diameter (turning): Ø 320 mm Bljdpey T Iarsfx Aldeh Additional equipment • Chip conveyor • High-pressure coolant system with paper filter • Automatic workpiece loading from tray Technical Specification Driven Tools No

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, overall weight: 6,000 kg, bar diameter (max.): 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, controller manufacturer: MITSUBISHI, controller model: M730UM, number of axes: 10, This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details. • Maximum Speed Spindle 1: 6500 1/min • Maximum Speed Spindle 2: 6500 1/min • Max. travel Z-axis 120 mm • Electrical Phases: L1,L2,L3,N,PE • Power Consumption: 57 kVA Bedpfx Aley T Hzuodslh • Maximum Input Current: 82 A • Main Fuse: 100 A • Short Circuit Rating: 5 kA • Maximum Voltage: 440 V • Operating Voltage: 400 V • Voltage Tolerance: ±10% • Frequency: 50 Hz • AC Voltage: 230 V • DC Voltage: 24 V • Counter Spindle Flushing: Included • Counter Spindle Inner Cooling: Included • Main Spindle Inner Cooling: Included • Radial Driven Drilling and Milling Unit for Revolver: Included • Axial Driven Drilling and Milling Unit for Revolver: Included • Angular Adjustable Driven Drilling and Milling Unit: Included • High Pressure Cooling System: 20 bar • Bar Feeder: IEMCA BOSS 552 • Bar Feeder Length: 3200 mm Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2007, CNC Turning-Milling Center CTX 410 - Year 2007 Blodoxy Nqcopfx Aldjh Heidenhain Plus IT control - 3-jaw chuck - Driven tool stations - Tailstock - Chip conveyor - Coolant tank