Used Doosan Forklift for sale (293)

Condition: used, Year of construction: 2011, turning diameter 250 mm turning length 510 mm control Fanuc i Series greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 550 mm spindle tunring speed 6.000 U/min number of tool places 12 Pos. auto power on hours ca. 18.136 h spindle hours ca. 8.822 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Driven tools - Short bar feeder - Chip conveyor Dcedpfx Aheylcqzeujf - Collets - 3-jaw chuck, hydraulic Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery Dsdpfxexq R Evo Ahuscf if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Dcjdpfjyx U Nwsx Ahusf

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B Dodpfx Aheyyd Uljuocf WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: used, functionality: fully functional, machine/vehicle number: 0039, Year of construction: 2021, operating hours: 849 h, load capacity: 3,000 kg, lifting height: 6,290 mm, free lift: 1,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,850 mm, power: 45 kW (61.18 HP), fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 2,730 mm, drive type: Diesel, construction width: 1,197 mm, Diesel forklift Chassis number: 0039 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, interior mirror, LED, Dcedpjyvwt Hsfx Ahuof

Condition: used, Year of construction: 2017, operating hours: 6,340 h, Year of manufacture: 2017 Dcedpsttzmnjfx Ahuof Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = - Central lubrication

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 2,125 mm, turning diameter over cross slide: 580 mm, turning diameter: 420 mm, spindle motor power: 25 W, spindle bore: 102 mm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 2,190 mm, mount diameter: 315 mm, For sale: DOOSAN PUMA 3100XLY turning center from 2013. Technical data: Max turning diameter: 420mm Max turning length: 2125mm Axis travels X/Y/Z: 293 / 130 / 2190mm Chuck size: 315mm (12'') Spindle bore: 102mm Max spindle speed: 2800rpm Dcodsyhv N Njpfx Ahujf Spindle type: Electro-spindle Number of turret stations: 12 Max driven tool speed: 5000rpm Head type: BMT65 Machine weight: approx. 11,000kg Machine equipped with SMW SLU3 self-centering steady rest - 45-165mm Control system: Fanuc with Manual Guide Machine in continuous operation. Inspection and testing possible. Both static and driven tool holders included.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Operating hours: 1,495 h • Travels: • Rapid traverse (X/Y): 36 m/min • Rapid traverse (Z): 30 m/min • Spindle: • Torque: 117.8 Nm • Taper: CAT 40 • Table: • Size: 1300 × 570 mm • Tooling: Djdpfxeyv Ezro Ahuscf • Tool changer: 30 positions

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, LPG forklift Mast type: Triplex Transmission: Automatic Front tyres type: Superelastic Front tyres size: 650-10 Rear tyres type: Superelastic Rear tyres size: 28x9-15 Djdpfx Aoyfy Ahehuecf Sideshifter, fork positioner, Power steering; wiper; operating weight with superstructure: 4798 kg Front windscreen, half-cab,

Condition: used, machine/vehicle number: 26411, Year of construction: 2013, operating hours: 5,486 h, load capacity: 2,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,635 mm, Equipment: cabin, sideshift, .: 26411 Machine details: Year of manufacture: 2013 Load capacity: 2,500 kg Lifting height: 3,950 mm Indicated operating hours: 5,486 h Mast type: Standard Mast height: 2,635 mm Length/Width/Height: 2,500 / 1,160 / 2,210 mm Operating weight: 4,200 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: Dcsdpfoyu Tk Dox Ahuef * Side shifter * Fork positioner * Load backrest ---- Further machine information: ---- The stated operating hours are generally read-off hours. We are happy to offer you suitable transport. An additional 250–300 forklifts, attachments, and sweepers are immediately available for you. Rentals also possible! We are happy to buy your used machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade buyers, the machine is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST, Year 2012, Location: 78176 Blumberg Turning diameter: 760 mm Turning length: 1540 mm Dedsywax Iepfx Ahuecf Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Equipped with sub-spindle, lower turret, driven tools, and 80-position tool magazine. Hydraulic hollow chuck system 12-position lower tool turret with BMT 65 P Chuck air-blow system for spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the sub-spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-stage clamping pressure for main and sub-spindle Automatic shutdown after production end Hinged belt chip conveyor 2 x power chucks 200 mm 1 x radial AGW 1 x axial AGW Extended high-pressure and paper band coolant system 80-position tool magazine Further information available upon request. Commissioning and training available on request.

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s Dcjdpfeyvqinjx Ahuef • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,200 h, load capacity: 9,000 kg, lifting height: 3,100 mm, fuel type: diesel, Equipment: cabin, Diesel forklift Machine make: DOOSAN Designation: D90S-5 Manufacture year: 2012 Meter readings (mtg): 8235 Unladen weight (kg): 12197 Lifting capacity (kg): 9000 Lifting height (mm): 3100 Dcjdpfx Ahevfp Rdeuef Side shift forks Mast type: STD Fuel type: diesel After a major maintenance overhaul for more than €7,000 - new tires - new forks - regeneration of cylinders, - gearbox: discs + sealants - brakes: discs and bearings - all oils, fluids and filters Technical condition: used, very good

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Dcjdpfjyvuvxex Ahusf

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,710 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Dcedpfxeyxipxo Ahusf Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Front tire condition: 80 – 100% Rear tire type: Solid rubber Rear tire condition: 80 – 100% Description: Diesel forklift DOOSAN D30G – 3,000 kg lifting capacity – Year of manufacture: 2008 – Sideshift – TRIPLEX free lift mast – Overall height: 2.2 m – Lifting height: 4.7 m – 7,710 operating hours according to meter – 4-cylinder YANMAR diesel engine with 58 HP – Solid rubber tires approx. 80% – Semi-cab, lighting system – Simple, mechanical forklift – Good condition – PRICE: 11,000 EUR excluding VAT Sideshift Third valve, rear working lights, front working lights, semi-cab, heating, full cab.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 8,343 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Dodpfx Asyxiprshuocf Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Front forklift DOOSAN D35C-5 - 3.5 ton lifting capacity - Year of manufacture 2008 - Sideshift - TRIPLEX free lift mast - Overall height 2.34 m - Lifting height 4.9 m - 8,343 operating hours according to meter - 4-cylinder YANMAR diesel engine, 58 HP - Solid rubber tires approx. 90% - Full cab, heating, lighting system - mechanical version - good condition - PRICE: 12,500 EUR plus VAT. Sideshift, third valve, rear work lights, front work lights, partial cab, heating, full cab,

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Dcodpfjyg Df Aox Ahujf Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights ---- Further equipment information: ---- Operating hours are generally read off the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Condition: excellent (used), power: 141.2 kW (191.98 HP), operation weight: 25,100 kg, chain condition: 70 %, Year of construction: 2017, operating hours: 7,494 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Operation hours: 7.494 hrs ROPS Radio back- drive camera Dedpfx Ajxlin Ejhuecf Airco Hydr. 2 piece boom Stick : 3m central lubrication all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 Schnellwechsler 1x Bucket with 1m width U/C: 70% good trackshoes 600 mm width engine with 141.2kW CE Operation weight: 25.1 to.

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,625 h, Equipment: air conditioning, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DHKCEBBWTG0001283 Other information Dcedpoyua E Uefx Ahujf Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Demolition/FOPS cab guard - Ditching/grading bucket - Hammer/shear hydr. circuit - Hammer protection circuit - Hydraulic adjustable boom - Joystick control - Rotating beacon - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit - Steel tracks

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received. Dedpfxjvri I As Ahuecf

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, New price: 11,900 EUR / Previous price: 14,900 EUR Lithium-ion battery. Forklift in perfect condition. We sell forklifts after comprehensive servicing. Prepared for end users. We can arrange transport within Europe and worldwide. ===== WhatsApp in English WhatsApp auf Deutsch Dcedpfx Aeyw Scfshujf WhatsApp en français WhatsApp на французском языке ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. Our qualified specialists have over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland and have many satisfied customers across Europe. We also manufacture EPAL EUR pallets, renowned for excellent quality and timely delivery. Each machine is thoroughly tested and undergoes a full service inspection before delivery. All necessary repairs are completed. The customer receives a forklift ready for immediate use. In Poland, at the customer's request, we can arrange official acceptance of the machine by the State Office of Technical Inspection (UDT). Our main goal is to satisfy our customers and solve their logistical challenges. We know how to prepare machines so our clients are fully satisfied and recommend us to others. Please feel free to contact us and take advantage of our services. Need a forklift supplier? Contact us.

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,500 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Battery disconnector - Ditching/grading bucket - GPS - Hammer/shear hydr. circuit - Hammer hydr. function - Hammer protection circuit - Joystick control - Machine control system - Rotating beacon Djdpsyt A Uisfx Ahuecf - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Steel tracks

Condition: good (used), Year of construction: 2015, functionality: fully functional, Description: Dodpfx Ajywlvxehuscf The machine is in good technical condition. Testing is possible by prior agreement. The machine comes with a full set of accessories, plus a Spacesaver bar feeder. Spindle speed: 40–4000 rpm. X-axis travel: 175 mm, Z-axis travel: 330 mm. Drawbar diameter: 68 mm.

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = Dodpfx Ahjxqfb Ejujcf - Rubber tracks

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Djdpfx Aheyvgzteuocf Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm C-axis Tool Turret Turret: 12-position BMT 45 Driven tools: all 12 stations 2 x radial driven tool 2 x axial driven tool Chip conveyor MACHINE DETAILS Machine weight: 4 t LNS loader not included in the offer The machine has mainly operated in plastics!