Used Doosan Forklift for sale (263)

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! There are 8 Doosan CNC Turning center Like this in our warehouse 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours Ndjdpfx Aszk I Rvskajc 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours you can visit and check all machine

Condition: used, Year of construction: 2001, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 240 mm, feed length Z-axis: 580 mm, overall weight: 4,100 kg, CNC Turning Machine, 1-Turret Manufacturer: Daewoo / Doosan Model: Puma 230A Year of Manufacture: 2001 Serial Number: XXXX Control System: Fanuc 18-T Operating Hours: Unknown Technical Specifications: ----- - Turret: 12 stations, BMT - Spindle Speed: 6,000 rpm max. - Bar Capacity: Ø 45 mm - X-axis Travel: 240 mm - Z-axis Travel: 580 mm - Hydraulic steady rest (following type) - Chip conveyor - Tool measurement system - Machine Weight: 4.2 t Nodpfx Aezzd I Sskaodc - Loading onto a truck is included in the price Accessories: ----- - Documentation - 2x Foot switches - 1x 3-jaw chuck - 1x Collet chuck, Hainbuch - Tool holder set

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2021. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 2 units available • CNC control: FANUC i Series (15" display, 2 MB program storage / up to 1,000 programs, Ethernet connection) • Rapid traverse X: 36 m/min • Rapid traverse Y: 36 m/min • Rapid traverse Z: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Coolant gun • Ball screw nut cooling • Tool breakage detection in the magazine • Automatic doors • Robot interface • Preparation for 4th axis • Coolant level sensor • Mist collector interface Additional equipment • LNS MH500 chip conveyor • Belt-type oil skimmer • HIWIN RCV 250 rotary table (4th axis) • HIWIN RTS 250 support (tailstock/support for 4th axis) • Hydraulic unit 200 bar, 2 A+B • Hydraulic fixture support for 4th axis • Seat air check Technical Specification Njdpfxjz N E Dvs Akaedc Taper Size BT 40

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of manufacture: 2015 Year of construction: 2015 Operating hours: 6.900 Nsdpfxex Hgn Ue Akasdc Field of application: Construction Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, lifting height: 4,710 mm, free lift: 1,263 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Technical condition: normal Nodpfx Aey Up Hcjkajdc Sideshifter, 3rd valve, 4th valve, rear work light, front work light,

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: I Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details. • Display: 15" • Program memory: 2 MB / up to 1,000 programs • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Automatic doors • Robot interface • Tool breakage detection in tool magazine • Ball screw nut cooling • Ethernet connection • Air clamp interface on table • Seat air check • Coolant level sensor • Mist collector interface • Coolant gun • Condition: Used, excellent condition, fully functional and regularly maintained Ndjdpjz I S E Nefx Akaec • Quantity: 4 units available Additional equipment • Chip conveyor LNS MH500 (right side) • Belt-type oil skimmer • Vacuum pump Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz Ndsdpfx Aozxy Ivjkaoc • Rated power: 40,61 kVA • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift, Njdpfx Asytkkfskaedc

Condition: used, functionality: fully functional, machine/vehicle number: 2118, Year of construction: 2019, operating hours: 2,049 h, load capacity: 3,000 kg, lifting height: 4,710 mm, free lift: 1,120 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, power: 48 kW (65.26 HP), fork carriage width: 1,000 mm, fork length: 1,050 mm, empty load weight: 4,861 kg, total length: 2,687 mm, drive type: Treibgas, construction width: 1,228 mm, Internal combustion forklift Chassis number: 2118 Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 28x9x15-14PR Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 6.50x10-10PR Rear tire condition: 40 - 60% Nodpfxezrkb He Akasdc Side shifter, 3rd valve, rear work light, front work light, roof cover, half cab, CE certificate, safety light, seat

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, New price: 11,900 EUR / Previous price: 14,900 EUR Lithium-ion battery. Forklift in perfect condition. We sell forklifts after comprehensive servicing. Njdpfx Akoy Hvtmoasdc Prepared for end users. We can arrange transport within Europe and worldwide. ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp на французском языке ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. Our qualified specialists have over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland and have many satisfied customers across Europe. We also manufacture EPAL EUR pallets, renowned for excellent quality and timely delivery. Each machine is thoroughly tested and undergoes a full service inspection before delivery. All necessary repairs are completed. The customer receives a forklift ready for immediate use. In Poland, at the customer's request, we can arrange official acceptance of the machine by the State Office of Technical Inspection (UDT). Our main goal is to satisfy our customers and solve their logistical challenges. We know how to prepare machines so our clients are fully satisfied and recommend us to others. Please feel free to contact us and take advantage of our services. Need a forklift supplier? Contact us.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 319 h, load capacity: 3,500 kg, lifting height: 4,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Njdoyadd Eopfx Akajdc Condition: Operational and fully functional Technical condition: Standard Front tires type: Superelastic Front tires size: 23x10-12 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Exide Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our machines are fully workshop-inspected and certified according to FEM 4.004. Please contact us via email or phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in purchasing your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We are happy to offer you professional and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, load guard, safety light, interior mirror, revolving beacon, single-pedal control, LED, seat,

Condition: used, lifting height: 4,650 mm, Year of manufacture: 2016 Nedpfxey Nw Abo Akaodc Year of construction: 2016 Operating hours: 8.740 Field of application: Construction Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger Nedpfjz Eaz Tjx Akaodc • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: used, Year of construction: 2022, operating hours: 560 h, load capacity: 5,000 kg, lifting height: 6,500 mm, free lift: 2,000 mm, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,330 mm, fork length: 1,200 mm, empty load weight: 7,960 kg, total length: 2,987 mm, drive type: Elektro, construction width: 1,475 mm, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Ndsdpfx Aot Dduwskaoc Condition: As good as new Technical condition: Very good Front tires Type: Non Marking Front tires Size: 28x12.5-15 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 7.00-12 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 840Ah Battery Manufacturer: MIDAC Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: Overhead guard with front and roof window, work lights front + rear, 3rd + 4th valve to fork carriage, rotating beacon, turn signals, BlueSpot rear, hand lever Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, full free lift, safety light, non-creeping tyres, interior mirror, rotating beacon, windshield wiper, seat heating, LED, seat,

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet Nsdpfezh Hpfjx Akaodc • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50

Condition: used, color: orange, Equipment: air conditioning, Year of construction: 2021 Ndodpfozb Ndtjx Akaec Operating hours: 4.750 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = - Central lubrication

Year of construction: 2021, condition: ready for operation (used), - USED - 8-AXIS TWIN-SPINDLE CNC LATHE WITH DOUBLE TURRET HEAD MAX ROTATING DIAMETER: 230 mm MAX TURNING LENGTH: 230x2 mm MAX TURNING DIAMETER: 230 - 230 mm BAR CAPACITY: 81 mm SPINDLE: 3500 rpm; 18,5-22 kW; 244 Nm; ASA A2-8 Ndodpfx Ajzbnrpokasc COUNTER SPINDLE: 5000 rpm; 15-18,5 kW; 223 Nm; ASA A2-6 X1-AXIS TRAVEL: 165 mm X2-AXIS TRAVEL: 165 mm Y1-AXIS TRAVEL: ±50 mm Y2-AXIS TRAVEL: ±50 mm Z1-AXIS TRAVEL: 700 mm Z2-AXIS TRAVEL: 700 mm B-AXIS TRAVEL: 730 mm RAPID FEEDS X-Y-Z: 30 - 15 - 40 m/min DRIVEN TURRET HEAD: BMT55P ; 24 + 24 POS; 5000 rpm; 7,5 kW HIGH PRESSURE COOLANT: 35 Bar CONTROL UNIT: DOOSAN FANUC i-series WEIGHT: 9600 Kg OVERALL DIMENSIONS: 3880 x 2360 x 2250 mm ACCESSORIES: PARTS CATCHER ; SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER ; LINEAR SCALES NOTE: ORE DI LAVORO MANDRINO 9800, CONTROMANDRINO 3000

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,280 h, travel distance X-axis: 165 mm, travel distance Z-axis: 700 mm, total height: 2,200 mm, total width: 1,630 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 2,800 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details. Ndjdpfx Akoz I Rbveajc - Operating Hours: 41,280 h (as of Spindle Hours: 24,632 h (as of Total Machined Parts (TEIL GESMT): 14,162 pcs- Number of Spindles: 2 (Main Spindle & Counter/Sub Spindle)- Main Spindle Speed Range: 50 - 5,000 rpm- Counter Spindle Speed Range: 50 - 6,000 rpm- Number of Turrets: 2 (Tool holders)- Powered/Driven Tools: Yes- C-Axes: 2- Y-Axes: 1 (Upper turret)- Max. Turning Diameter: 230 mm- Max. Workpiece Length: 700 mm- Power Supply Voltage: AC 200/220V, 3-Phase (PE, 50/60 Hz) / 400 V, 50 Hz- Rated Power (Nennleistung): 75.21 kVA- Full Load Current (Volllaststrom): 197.37 A- Interrupting Capacity (Unterbrechungsstrom): 13 kA- Short-Circuit Current (Kurzschluss-Strom): 25 kA- Schematic Output (Schaltplan-Ausgabe): PT1H31AA02- Additional Equipment & Accessories: * FMB turbo 8-80/3200 bar feeder * Chip conveyor * Coolant system with belt filter * Internal coolant supply (IKZ) & supply via turret head * Hydraulic power unit * Large selection of tool holders, collet chucks (REGO-FIX / ER), and turning inserts Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2023, DN Solutions LYNX 2100M New machine, never used! 0 operating hours. Technical data: Control: Fanuc 0i-F Plus iHMI-Touch Milling function with C-axis and powered tools (6000 rpm) Ndsdpfoz Hxz Usx Akajc Bar capacity (mm): 65 Tool holder: BMT45 Turret with 24 positions Max. turning diameter (mm): 300 Max. turning length (mm): 290 Main spindle chuck size: 8" (204 mm) Samchully Max. main spindle speed (rpm): 4500 Main spindle power (kW): 15 Main spindle torque (Nm): 169.0 Travel ranges: X: 205 mm Z: 340 mm Linear guide -CNC tailstock -Tool probe -Parts catcher -Number of powered tools: 4 pcs, 2/2 -Number of standard tools: 8 pcs -Documentation -Knoll chip conveyor, ejection at the front on the right side Dimensions: Length: 2350 mm | Width: 1595 mm | Height: 1693 mm | Weight: 3170 kg

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 5700 was manufactured in 2021, 3 units available. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 3 units available • Condition: Excellent (used) • Functionality: Fully functional • 15" display • 2 MB part program storage / 1,000 programs Nsdpsz I Tkgsfx Akasdc • Rapid traverse X-axis: 36 m/min • Rapid traverse Y-axis: 36 m/min • Rapid traverse Z-axis: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ethernet connection • Ball screw nut cooling • Tool breakage detection in magazine • Automatic doors • Standard-height column • Hydraulic system 3A + 1B • Seat air check • Coolant level sensor Additional equipment • Robot interface • 4th axis • Hiwin RCV 250 rotary table • HIWIN RTS 250 support • 4th-axis fixture support hydraulic • LNS MH500 chip conveyor • Oil skimmer, belt type • Coolant gun • Mist collector interface Technical Specification Taper Size BT 40

Condition: repair required (used), functionality: limited functionality, first registration: 01/2018, Year of construction: 2018, machine/vehicle number: DW6CWLBRAG1010165, We are offering this Doosan machine, model DL200, a wheel loader, manufactured in 2018. The machine has an electronic fault: it starts, but due to the electronic error, it cannot move. Manufacturer: Doosan Model: DL200 Year of manufacture: 2018 Njdjy S S Epepfx Akasdc If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 6700 XL was manufactured in 2021. It features an impressive X-axis travel of 2,100 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a FANUC i-Series CNC control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700 XL vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent, used • Functionality: Fully functional • Display: 15" Nodpfx Aoz Ngy Eekasdc • Program storage: 2 MB / 1,000 programs • Rapid traverse X/Y/Z: 30 / 30 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ball screw nut cooling • Tool breakage detection • Automatic doors • Robot interface • 4th-axis preparation • Ethernet connection • Coolant gun • Coolant level sensor Additional equipment • HIWIN RCV 320 rotary table (4th axis) • HIWIN RTS 320 support (tailstock) • Hydraulic aggregate: 200 bar, 3 A+B • Hydraulic 4th-axis fixture support: 4x oil / 4x air; seat air check • LNS MH500 chip conveyor • Oil mist extraction system • Oil skimmer Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Njdozhc Anopfx Akasdc Y-AXIS TRAVEL: 570 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 150-660 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 15000 rpm; 10 - 17 kW; ISO 40 - DIN TABLE SIZE: 1300 x 570 mm MAX ADMITTED LOAD: 1000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 80 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 3110 x 2413 x 2985 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2017, operating hours: 5,824 h, Equipment: ABS, all wheel drive, * Doosan DX 235 LC-5 crawler excavator * Year of manufacture: 2017 Nedpfxezt Hfde Akaedc * Operating hours: 5,824 h * Hydraulic adjustable boom * Air conditioning * MS quick coupler * Weight: 24,400 kg * More pictures and videos available via WhatsApp * Specifications subject to change without notice and prior sale.

Condition: used, color: orange, Year of construction: 2017 Operating hours: 6.300 Nsdpezi Ecajfx Akajdc Empty weight: 23.500 kg Track width: 60 cm Digging depth: 10.795 m