Used Engel Robot for sale (247)

Condition: used, Year of construction: 2005, operating hours: 130,948 h, functionality: fully functional, machine/vehicle number: 155136, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production cycle. Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It is a robust design from a reputable manufacturer, ensuring reliable and precise operation. The machine can be inspected by prior arrangement. Technical documentation is available. Lrsdpez Enu Ijfx Amzsu Assistance with organizing loading is provided.

Condition: excellent (used), Year of construction: 2011, Sprue picker Engel Type: ER-USP 5 Year of manufacture: 2011 Lodpjxq Tkhefx Amzeru

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent Lsdpfxex Nr Uxs Amzsru • Status: In production Additional equipment • Robot (equipped)

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 375 kg, load capacity: 3 kg, For sale is a stand-alone handling machine of the Engel brand and type ERC 13/12-F The handling unit is ready for immediate use and fully functional after assembly Technical data Year of construction: 2010 Max. handling weight: 3.5 kg X-stroke: 400 mm Y-stroke: 1,000 mm Z-stroke: 2,240 mm Y-axis: Single stroke B-axis drive: Pneumatic B-axis torque: 5 Nm Lrodpfx Ajvgc Skomzeu Servo axes: 3 Pneumatic axes: 2 Compressed air circuits: 2 Valve positions: 6 required DI(UEK): 8 Stand height: 375 mm Connection data: 3*400 V /50HZ/16 A Rated current: 10,000 A Shelf height 900-1200 mm (depending on installation height) On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, mold height (min.): 190 mm, ejector force: 20,100 N, ejector stroke: 105 mm, total height: 3,554 mm, overall weight: 6,700 kg, Clamping force: 60t Year of manufacture: 2010 Injection unit 200 Lsdpfx Aez Hmc Hemzjru Screw diameter: 30 mm Specific injection pressure: 1451 bar Injection volume: 99 cm³ Pump motor power: 15 kW Tool closing unit 600 Clamping force: 60 t Tool plate dimensions: 1200 mm (rotary table) Ejector force: 20.1 kN Ejector stroke: 105 mm Tool height: 190 mm Opening stroke: 335 mm Weight: 6700 kg Control system: CC200 Vertical injection molding machine with rotary table Equipment: - Vertical design with rotary table, 2 mold positions - Rotary table Ø 1200 mm - Moving platen 990 x 575 mm, M16 threaded grid - Screw Ø 30 mm - Injection flow rate 149 cm³/s, boosted pressure 2205 bar - Screw speed up to 480 rpm - Nozzle stroke 530 mm, nozzle clamping force 28.3 kN - Nozzle opening Ø 3 mm, nozzle length 50 mm - Min. mold height 190 mm - Max. machine height 3554 mm Typical applications: overmolding of connectors, contacts, cable ends, sensors, and threaded and metal inserts.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent Lodpsx Nr Ryjfx Amzjru • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 Lodsz Ap Imjpfx Amzjru RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 Lredpfx Amox Nr R Hszeu • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 45 mm, Equipment: documentation/manual, ENGEL VC1800/220 TECH PRO ECODRIVE Lrodpfxezvlmxj Amzeu Clamping force : 220 ton Screw diameter : 45mm

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system. Lrsdpezqdagofx Amzou

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Ljdpfx Aezt Slpjmzoru

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Lsdpezx Uc Iofx Amzeru Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Ljdpoztzqzofx Amzeru

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Screw diameter: 40 mm Shot weight: 150 g Shot volume: 165 cm3 Lsdpezypwpefx Amzeru \+ robot Sepro success 11 Type: Horizontal Drive: Electric

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Lodpfx Amozhudkszeru

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Lrsdpfx Aozgtvvjmzeu

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Ledju Dbkdopfx Amzjru Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL type: e-max 310-100 controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x Ljdpfx Amez Eabtozsru handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m total weight: 4400KG

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 Lrjdpfoyn Ntzex Amzsu • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM Lodpfxozzv Tgj Amzeru ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: excellent (used), Year of construction: 2014, Engel for silicone Insert 500V/shuttle Clamping force 100 tons Ljdpfoy Aib Njx Amzjru Year of manufacture 2014

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 3,922 kN, screw diameter: 90 mm, injection weight: 2,228 g, No reserve price – guaranteed sale to the highest bidder! ENGEL injection moulding machine + ERC/1-F robot! Lredpoy Ewuisfx Amzsu TECHNICAL DETAILS Clamping force: 400 tonnes Screw diameter: 90 mm Shot weight: 2,228 g Enlarged platen: 1,200 x 1,100 mm MACHINE DETAILS Weight (first unit): 20 tonnes Weight (second unit): 7.5 tonnes EQUIPMENT Engel ERC/1-F robot (year of manufacture: 2009) Note: If you purchase multiple items from the same location (see offers below), the most favourable disassembly and loading costs will apply.

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Ledsz Ipn Ispfx Amzsru Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Lsdsz Nxiljpfx Amzoru Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: excellent (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 220 cm³, plate length: 760 mm, plate height: 760 mm, total length: 67,500 mm, total width: 2,000 mm, total height: 2,420 mm, overall weight: 8,500 kg, Equipment: documentation/manual, ENGEL e-motion 440-160 Stock No.: 503676 Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum installation height: 375 mm Maximum installation height: 600 mm Maximum platen spacing: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Ledpfxoz A S I Ts Amzsru Technical data, injection side Screw diameter: 40 mm Displacement: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 min Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500KG Equipment Screen text in German Screen text in English CEE socket 32A Hydraulic core pull, 2x Hydraulic core pull unit Air valve 1x Machine with water manifold Machine without material hopper Machine without suction conveying system Pneumatically operated needle shut-off nozzle Leveling elements EUROMAP 63 interface EUROMAP 67 Handling interface Interface for ejector plate locking Schuko socket 10A