Used Gildemeister Sprint 65 Linear 3T for sale (257)

Condition: good (used), Year of construction: 2007, - SIEMENS 849 D control unit - Bar capacity 65 mm - Main and counter spindle with speed 5,000 1/min - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Speed of driven tools 4,000 1/min TRAVEL X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Ppelheuw Izvocdwxer Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168h On-time hours: 61,362 h Technical data: - Max. revolutions of main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs to be repaired. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece collection device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction device - Electrical interface and software preparation for bar loading magazine - Synchronous operation between main and counter spindles - Hinged belt chip conveyor - 2 additional inputs/outputs (4 M functions) - Workpiece counter and time calculator Pslhcdsvzwm Ejwxopr - Rigid thread cutting (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light - Air conditioning for electrical control cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min. for turrets 1, 2 and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the work area - Differential pressure system for the counter spindle with the option of setting 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered. Price: €36,000 Location: 75334 Straubenhardt If you are interested or would like further information, please contact us.

Condition: ready for operation (used), controller model: Fanuc 310i, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, net weight: 10,000 kg, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Ppjlhcdwjv Rwltsxor Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Year of construction: 2006, Condition: like new (used), With machine come 5 live tool holders and 5 normal tool holders. Ppelhcdjlbmy Uswxer Parts shown by hand not come.

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 1700 mm Measurements depth 4500 mm Measurements height 1900 mm Machine weight 6000 kg Control Unit Brand SIEMENS Model Sinumerik 840D Pjlhcdwovfywuoxepr Main Drive Spindle speed range 6000 rpm Spindle motor power 18.5 kW Number of axis 6 Media Chip conveyor Yes Additional Equipment Number of Tools: 12 Tools (including driven tools) Three turrets with 12 positions each, all positions support driven tools (VDI30 mount). Upper turret equipped with a Y-axis. Part catcher device with conveyor for part unloading Collet Chucks SK80: 18 units Angular Driven Tool Holders: 5 units Tool Holders for External Turning: Approx. 12 units for square 20 mm Angular Holders for Hole Turning: Approx. 12 units This 6-axis Gildemeister DMG GILDEMEISTER SPRINT Linear 65 was manufactured in 2006. A robust CNC Lathe with Linear Technology, it features a maximum turning diameter of 65 mm and length of 600 mm. Equipped with Siemens Sinumerik 840D control, three turrets, and Y-axis capabilities, it ensures precision and flexibility. If you are looking to get high-quality turning capabilities consider the Gildemeister DMG GILDEMEISTER SPRINT Linear 65 machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Pjlhcdsvw Am Njwxepr Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2015, Condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, drawtube bore: 76mm, collet chuck diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm h5, speed: 5000rpm, torque: 150Nm, power: 22kW. Counter spindle: drawtube bore: 52.5mm, diameter of collet holder: 160mm, diameter of centering chuck: 175mm, spindle nose: 140mm h5, speed: 5000rpm, torque: 86Nm, power: 18kW. Travel X1/Y1/Z1: 165mm/40mm/300mm, travel X2/Y2/Z2: 165mm/40mm/640mm, travel Z3: 640mm. Tool positions: 12, tool holder: VDI 30 + TRIFIX. Machine dimensions X/Y/Z: approx. 6900mm/1700mm/2650mm, weight: approx. 10300kg, control: Siemens 840D SL, operating hours: 40540h, spindle hours: 26556h. Including automatic parts unloading, tool slide turret, pneumatic unit, coolant system, hydraulic system and lubrication system. Automatic parts unloading IRCO MUK 7012-II, year of manufacture: 2014, total conveyor path: 6m, conveyor width: 100mm, conveyor speed: 10m/min, max. load including pallet and product: 1.5kg. Documentation available. On-site inspection is possible. Ppslhcdeu Rc Rxewxer

Condition: ready for operation (used), Year of construction: 2006, operating hours: 52,455 h, Functionality: fully functional, machine/vehicle number: 2501-0188, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Psljur Hfzshcdwxepr

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Ppslhcdevwz Ryswxor Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, Functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Feed (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Rated force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Feed (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of stationary tools (internal): 6 Diameter: 20 mm Number of stationary tools (external): 4 Tool shank size: 12 × 12 mm Number of rotating tools: 4 Collet type: ESX 16 MACHINE DETAILS Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA On-time: 85,620 h Program run: 27,896 h EQUIPMENT - FMB Turbo 3-36 bar loader / 4200 / A, built in 2007 - Coolant tank with chip conveyor Ppjlhewcprnocdwxjr - Central lubrication system - Handheld control unit - Documentation available

Condition: good (used), Year of construction: 2011, turning length: 320 mm, spindle speed (max.): 6,500 rpm, turning diameter: 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, Gildemeister Sprint 42 linear Year of manufacture 2011 including Iemca loading magazine TECHNICAL DETAILS Control: Fanuc 160i Workpiece diameter: max. 42 mm Workpiece length: max. 320 mm Bar capacity: max. 42 mm X-axis travel: max. 50 mm Y-axis travel: max. 350 mm Z-axis travel: max. 120 mm Main spindle spindle speed: 6,500 rpm Counter spindle spindle speed: 6,500 rpm Pjlhcewam U Ujdwxjpr Axes Number of linear axes: 6 Number of C-axes: 2 MACHINE DETAILS Weight: 4,700 kg Connected load: 40 kVA EQUIPMENT - Loading magazine Iemca Boss 545E 32 LL, 2011 - High-pressure system with integrated oil cooling - Kraft and Bauer fire extinguishing system - Chip conveyor system - Parts conveyor belt - Machine documentation -- IMMEDIATELY AVAILABLE --

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, -IEMCA BOSS 552 HD loader -Fire fighting system -High pressure system Burener Maschinenfabrik with 20 bar high pressure pump with oil cooling -DELTA THERM refrigerator Ppelhov Rzyzscdwxer

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY Ppslhou E U Ufecdwxsr - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS HYDROBAR MINI-SPRINT

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 501628, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 280 mm, bar diameter: 65 mm, spindle diameter: 79 mm, Machine package: 2 machines = 1 x functioning machine + 1x spare parts carrier TECHNICAL DETAILS Bar diameter (normal): 65 mm Main spindle Spindle head (flat flange): 140h5 mm Spindle bore diameter: 79 mm Clamping tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% ED): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% ED): 320 / 240 Nm Path speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Face path/longitudinal path: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X): 15 x 25 mm Threaded spindle pitch (X Ø Z): 15 x 32 mm Slide 2 Face path/longitudinal path: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X/Z): 15 x 25 mm Tool carrier Number of tools: 8 Tool holder: Shaft Ø according to DIN 69880 Number of driven tool stations: 4 Power max. (40%/100% ED): 7.6 / 4.6 kW Max. torque (40%/100% ED): 24 / 14.7 Nm Max. speed (tool holder 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle head diameter (flat flange): 120 mm Positioning device: stepless pitch MACHINE DETAILS Polovviwxjhcdwxepr Total length (with chip conveyor): 3,500 mm Total height (with control cabinet): 1,625 mm Total width (with control cabinet): 1,750 mm Weight of the machine including control cabinet: 5,000 kg Weight of the integrated bar loading magazine: 900 kg Hydraulics Contents: 9.8 l Pump power: 1.1 kW Coolant system Contents: 160 l Pump power: 1.65 kW Discharge rate at 8 bar: 25 l

Condition: ready for operation (used), Year of construction: 2003, operating hours: 7,309 h, Functionality: fully functional, machine/vehicle number: 2301-0141, turning diameter: 33 mm, spindle speed (max.): 8,000 rpm, Equipped with C-axis for main and counter spindle as well as bar loader Iemca TECHNICAL DETAILS Turning diameter: max. 33 mm Speed: 8,000 rpm Number of axes: 8 pieces Control: FANUC Collet holder: for main and pick-up spindle Fixed tools: 5 positions 16x16 tool holder for slide 1 Rotating tools: 3 driven tools on slide 1 with ESX16 spindles Drive for rotating tools: Slide 2 Rotating tool speed: 6,000 rpm Tool holder: 4-fold tool holder Ø32mm Pslhcdwsuf S I Hjxspr MACHINE DETAILS Dimensions: 4,020 x 1,850 x 1,925 mm Machine weight: approx. 4,200 kg Connected load: 34 kVA Operating voltage: 400 V, 50 Hz Bar loader: IEMCA BOSS 545-E EQUIPMENT - Chip conveyor h=1100 mm - Pneumatic ejector and unloading system with belt - Cleaning system for counter spindle - collet chuck - Mechanical preparation for oil mist filter - Electrical and software preparation for bar loader - Synchronization between main and counter spindle - Constant cutting speed and rigid thread cutting - Spindle speed control - Piece/time counter - Software for bar feed in overlapped time - Load Monitor Software (Tool Effort Management) - Instructions

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 Polhcdetqmnnswxopr outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, Functionality: fully functional, Gildemeister MF SPRINT 65 Machine no.: 07810000801 Control system: SINUMERIK 840 C Year of construction: 1999 Operating hours: 140810 Irco ILS short bar loader Ppslheu Dg Ubecdwxjr Annual maintenance by DMG, last maintenance 08.07.2024: Linear guide, axial bearing, KGT and adjusting nut of the X1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the X2 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z2 axis replaced. Replacement of all sliding plate wipers. Safety window of the work area door replaced. Replacement of all feed toothed belts and the toothed belts for the counter spindle drive Tool drive 1 dismantled, disassembled, cleaned and re-stored. Filter mat of the main spindle fan replaced, coolant valves of turret 1 and 2 replaced. Chuck of the main spindle and counter spindle dismantled and cleaned. Machine geometry and working area remeasured and adjusted. Hydraulic filter cartridges replaced. Pneumatic filter replaced. Technical data see appendix Machine can be inspected under power Price 35.000 € VHB The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. . Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8086010645B, turning length: 320 mm, spindle speed (max.): 6,500 rpm, turning diameter: 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, TECHNICAL DETAILS Control: Fanuc 160i Workpiece diameter: max. 42 mm Workpiece length: max. 320 mm Bar passage: max. 42 mm X-axis travel: max. 50 mm Y-axis travel: max. 350 mm Z-axis travel: max. 120 mm Main spindle Spindle speed: 6,500 rpm Counter spindle spindle speed: 6,500 rpm Axes Number of linear axes: 6 Number of C-axes: 2 Ppeljunrqhohcdwxsr MACHINE DETAILS Weight: 4,700 kg Connected load: 40 kVA EQUIPMENT - Loading magazine Iemca Boss 545E 32 LL, 2011 - High-pressure system with integrated oil cooling - Kraft and Bauer extinguishing system - Chip conveyor system - Parts conveyor belt - Machine documentation

Condition: excellent (used), Year of construction: 2005, Chip conveyor Iemca Boss 545/32 bar loader Pslhcot Ab H Uodwxjpr

Condition: excellent (used), Year of construction: 1997, operating hours: 64,905 h, Functionality: fully functional, machine/vehicle number: 501637, bar diameter: 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Pslhcdsu Tc Dzswxjpr Control: Sinumerik 840C Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter: 65 mm Turret and spindle Turret: 2 pieces, 8 places each, VDI30, 4 driven tools each Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck MACHINE DETAILS Operating hours: 64,905 h Dimensions incl. bar loader and chip conveyor (LBH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Fixture for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - including 2 tool holders

Condition: excellent (used), Year of construction: 2005, Turning diameter: 325 mm Turning length: 600 mm Control: Siemens 840 D Chuck: SMW 250 mm and 200 mm on counter spindle 12-station turret: Driven tools: Speed: 5000 rpm Drive power: 25 kW Y-axis: mm C-axis: Total power requirement: 35 kW Machine weight approx.: 6.5 t Space required approx.: 3.5 x 2.5 x 2.1 m Tool speeds: 4500 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Control: Siemens 840 D powerline with Shopturn Ppjlhcdov Sdbwswxsr - C and Y axes, driven tools - High-pressure coolant system - Robot interface - Hollow clamping device - Tool holder - Counter spindle - Parts catcher - Automatic door Video available.

Year of construction: 2004, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Ppjlhewgf A Rjcdwxor This Gildemeister CTX 320 horizontal turning machine was manufactured in 2004. It is ideal for versatile machining tasks. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2015, operating hours: 148 h, Functionality: fully functional, turning length: 180 mm, turning diameter: 20 mm, spindle motor power: 2,200 W, spindle speed (max.): 10,000 rpm, rotational speed (max.): 6,000 rpm, bar passage: 20 mm, bar diameter: 26 mm, Equipment: rotational speed infinitely variable, Excellent condition CNC lathe featuring advanced technology for precision machining. Specifications: >Control System: Fanuc 32-iB >Year: 2015 >Operating Hours: Only 828 total hours (148 cutting hours ONLY) >Axes: 7-axis functionality >Spindles: Dual spindle, each with C-axis indexing (0.001° precision) >Main Spindle Capacity: Max bar diameter 20mm, max speed 10,000 rpm, power 2.2 kw >Counter Spindle Capacity: Max bar diameter 20mm, max speed 10,000 rpm, power 1.5 kw >Tooling: 4 driven tool positions (6000 rpm max), multiple turning and frontal tool holders >Barfeed: PRO HP326, 3.0mm – 26mm bar capacity Additional Features: >Collet systems for both spindles >Swarf tank, coolant system, pneumatic ejector >Belt-type chip conveyor Ppelswffh Dshcdwxer >Integrated fire safety, electrical/software interface >Capability to switch from steady to sliding headstock operation A highly versatile and productive machine suitable for precision manufacturing.

Condition: good (used), Year of construction: 2013, Gildemeister GMX 250 linear, Year of manufacture 2008, Siemens 840 D control system, Max. bar capacity up to 65 mm, Adjustable axes X1/Y1 - 550/180 mm, Z1 - 1185 mm, B1 - 240 degrees, X2 - 180 mm, Pslowcf Aiohcdwxopr Z2 - 1050 mm, Z3 - 1150 mm, Chuck Ø 200/250 mm, 1 12-station VDI 40 turret, 46-station HSK 63 magazine, Counter spindle, B-axis NC swivel milling head, 9200 spindle hours, Extraction system, Belt filter, Internal coolant supply 20 bar,

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min Ppolev Irgyjhcdwxer power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret