Used Hurco for sale (166)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 704-0101-809, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-axis: ± 30° / 110° Rapid traverse A-axis: 16.5 m/min C-axis: 360° Rapid traverse C-axis: 16.5 m/min Spindle Speed range: 10 - 12,000 1/min Spindle motor: 18 kW Tool Tool holder: SK 40 Tool stations: 32 Dusdpfx Asxamfkoh Sjl Working area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Space required (LxWxH): 2.700 m x 4.000 m x 3.250 m

Condition: used, Hurco VMX30m for sale Years of manufacture 2007 Ultimax Control system Offline programming system Tooling Conveyor Great machine with great spec please feel free to contact if any additional information required. Duedpowl I Sfofx Ah Sel

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,625 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 790 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Technical details: Duodpfxsxbrrfe Ah Sol x-travel: 1625 mm y-travel: 880 mm z-travel: 790 mm table surface area: 1675 x 890 mm table load: 2000 kg turning speeds: 12000 1/min tool taper: SK 40 control: ULTIMAX 4 tool change unit: 40 Pos. distance spindle /table: 150 - 910 mm spindle: 15 kVA total power requirement: 38 kVA weight of the machine ca.: 15,5 t dimensions of the machine ca.: 4,9 x 3,8 x 2,75 m 3-axis universal machining center, chipconveyor, internal coolant device 20 bar, coolant tank 600 liter incl. paper filter, el. handwheel, USB interface, LAN, DXF software, Hours "machine on" approx. ? h *

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (min.): 12,000 rpm, power: 0.018 kW (0.02 HP), Hurco machining center V 42 T 3-axis technology Travel in x 1067 mm Travel in y 610 mm Duodpfx Aotxrbioh Sjl Travel in Z 610 mm Table dimensions 1270 x 610 mm Spindle speed 12000 rpm 40-fold tool changer Chip conveyor Simulation graphics Tool and material library Pocket milling with island Synchronous thread cutting without compensating chuck Win Max control IKZ high pressure through the spindle

Condition: used, Year of construction: 2007, Manufacturer HURCO Type VMX 50 year of construction 2007 Dusdpfx Ajtpczxsh Sel Control ULTIMAX Machine weight approx. 10 t. Tool holder SK40 x-path 1,270 mm y-path 660 mm z-path 610 mm Speed range 10,000 1/min Table size 1,500 x 660 mm Number of tools in the magazine 40 Pl

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition Dsdpfjw Tdiuox Ah Seul

Condition: used, Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Duodewgbfuspfx Ah Sel Frame No. H-30688 Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Year of construction: 1997, condition: ready for operation (used), Max. load: 500kg, feed rate: 3-7600mm/min, rotational speed: 80-8000/min, length: 4000mm, width: 3776mm, height: 2692mm, weight: 4.15t. Dedpfx Aei Atg Ueh Sjul

Condition: ready for operation (used), Year of construction: 2000, operating hours: 9,651 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Technical details: x-travel: 1020 mm y-travel: 510 mm z-travel: 610 mm control: ULTIMAX 4 table surface area: 1.220 x 510 mm Dujdpfjxbrqzsx Ah Ssl table load capacity: 750 kg tool change unit: 24 Pos. turning speeds: 10.000 1/min tool taper: SK 40 spindle: 15 kW chip conveyor electric handwheel DXF - Import possible working hours on mech hour meter 9651 h *

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: M542-01205121BFC / Q-5145, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 1,500 mm, table length: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 1,270 mm Dusdsvr Avgepfx Ah Sel Y-axis travel: 660 mm Z-axis travel: 610 mm Number of controlled axes: 3 Table length: 1,500 mm Table width: 660 mm Load limit: max. 1,350 kg Feeds Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 20,000 mm/min Spindle Mount: 40 ISO/BT/MK Power: 18 kW Speed range: max. 12,000 rpm Coolant through the spindle: 20 bar Tool changer Capacity: 30 tools EQUIPMENT - chip conveyor - cooling system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: VMX1-06229016BHB, travel distance X-axis: 660 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, table width: 762 mm, table length: 356 mm, TECHNICAL DETAILS Travel Paths Travel X-axis: 660 mm Travel Y-axis: 350 mm Travel Z-axis: 450 mm Table and Mounting Table clamping surface: 762 x 356 mm Mounting: SK 40 DIN 69871 Spindle and Tools Speed: 10 - 10,000 rpm Tool station capacity: 20 stations Control: ULTIMAX 4 Djdpew Eiaqefx Ah Ssul MACHINE DETAILS Electrical Data Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Operating hours: 25,000 hours Dimensions & Weight Dimensions: 2,000 x 1,800 x 2,660 mm Weight: 2,900 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 4,900 h, Hurco machining center VM 10 i Working range Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniform) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Main spindle Spindle cone (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Feed rate Rapid traverse X-axis / Y-axis / Z-axis (m/min) 28 / 28 / 28 Tool changer Magazine positions / optional 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Further data Required floor space (mm) (doors open, incl. control and chip conveyor) 3,264 x 2,930 x 2,564 Weight of the machine (kg) 2,850 Coolant tank capacity (l) 62 Screw conveyor Optional Duodjtryq Sepfx Ah Sjl Technical data may be subject to change without notice.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M442-06203104DFA, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis: 1,060 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse (X/Y/Z): 30 m/min Distance table surface – spindle nose: 150 – 760 mm Dusdpfx Ahjwrr Nzo Ssl Speed range: 10,000 rpm Spindle motor: 15 kW Tool holder: SK 40 Tool changer: 24 positions Table size: 1,300 x 630 mm Max. table load: 1,100 kg MACHINE DETAILS Connected load: 24 kW Required space (LxWxH): 4.9 x 3.8 x 2.75 m Machine weight: 6,500 kg EQUIPMENT - Chip conveyor - NC rotary tilt table - No internal cooling (IKZ)

Condition: ready for operation (used), Year of construction: 2003, Travel X/Y/Z: 610mm/508mm/610mm, rapid traverse X/Y/Z: 35m/35m/30m, feed: 7600mm/min, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, tool holder: SK40, tool positions: 24, spindle speed: 10000rpm, power: 7.5kW. Machine dimensions X/Y/Z: approx. 2200mm/2400mm/2500mm, weight: approx. 5000kg, control: Ultimax 4, documentation available. On-site inspection is possible. Duedpfx Aswpu Ihoh Sel

Condition: good (used), Year of construction: 2016, HurcoTM10i Year of manufacture 2016 Winmax control Max. turning length 758 mm Dusdswx Hm Ijpfx Ah Sel Max. turning diameter 450 mm Travel paths 250 x 790 mm Accessories: tool measurement, 3-jaw chuck, tool holder, parts catcher

Condition: ready for operation (used), functionality: limited functionality, To be sold as a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Dedet Takajpfx Ah Seul Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately Price: negotiable

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,500 h, functionality: fully functional, machine/vehicle number: M342-06207026DHA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 1,020 mm, table length: 510 mm, TECHNICAL DETAILS Traverse Paths X-axis travel: 760 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table Clamping surface: 1,020 x 510 mm Dusdpfx Aow Eih Ijh Sel Spindle Speed: 10 – 10,000 rpm Mount Mount: SK 40 DIN 69871 Number of stations: 24 Control: Ultimax 4 MACHINE DETAILS Electrical Data Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Operating hours: 27,500 hours Dimensions & Weight Dimensions: 3,900 x 4,100 x 2,800 mm Weight: 2,900 kg

Condition: used, Year of construction: 2007, TECHNICAL DATA Dedpowud Afofx Ah Seul Travel X 760 mm Travel Y 510 mm Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: H-H40611, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Big Plus spindle recently replaced + internal coolant supply TECHNICAL DETAILS Travel X / Y / Z: 1067 / 610 / 610 mm Spindle speeds: 12,000 rpm Rapid traverse X, Y, and Z: 30 m/min Power: more than 15 kW Tool changer: 24 positions, ISO 40 Control: WinMax Ultimax 4 Table: 1270 x 610 mm Table load: max. 1350 kg Duodpfx Aewc R Dxoh Sel EQUIPMENT - Chip conveyor - Oil cooler - Electronic handwheel - Internal coolant supply

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible. Dodpfeuzyafsx Ah Seul

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, TECHNICAL DETAILS Travel Distances Travel X-axis: 1,060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Positioning accuracy: +/- 0.01 mm Repeatability: +/- 0.005 mm Feed and Rapid Traverse Dedjw Eiqcepfx Ah Ssul Programmable feed rate: 3 - 7,600 mm/min Feed rate adjustable via console: 3 - 11,400 mm/min Rapid traverse X/Y-axis: 30 m/min Rapid traverse Z-axis: 20 m/min Spindle Spindle speed max.: 12,000 rpm Max. torque: 625 rpm Spindle taper: SK40 Tooling Drum magazine: 24 positions Max. tool weight: 7 kg Max. tool length: 300 mm Table Table dimensions: 1,270 x 610 mm Max. table load: 1,100 kg Control: Hurco SingleMAX MACHINE DETAILS Dimensions & Weight Dimensions: 4,600 x 3,800 x 2,750 mm Weight: 6,500 kg

Condition: excellent (used), Year of construction: 2007, Hurco machining center VMX 24 condition see pictures Dujdjv Nzuijpfx Ah Sol

Year of construction: 2001, condition: ready for operation (used), A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible. Djdpfx Ajw Dfg Deh Soul

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Duedpfxjv Nzuce Ah Ssl

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Dusdpfow Dfhzex Ah Sol