Used Kasto Kastowa C 7 for sale (126)

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds Gjdou H Acyepfx Ahzsud - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm Gujdpfx Aex Sxx Ashzsd - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm Guodpfxewzu A As Ahzod - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor Gusdpfx Ajxph E Rshzjd - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm Gujdpfeyi Unasx Ahzod

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm Gjdpfx Asyqr Utjhzoud The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min Guedpfx Ahot Tqlbjzed power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Godpfx Aou Uwygehzoud Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Hydraulic bandsaw, metal cutting saw, power hacksaw KASTO Type PSB WBS 210 / 230 Machine No. 115 106 1212 / 72783 Year of manufacture 1986 Cutting range - Round Ø 250 mm Cutting range - Square 225 x 225 mm Cutting range - Rectangle 260 x 100 mm Cutting speed 11 - 13 - 17 - 22 - 26 - 34 m/min Saw blade length 400 mm Motor power 1.4 and 1.8 kW, pole-changing Power connection 380 Volt, 50 Hz - Only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw blade feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering the saw blade - Manually adjustable material support table with mm scale via handwheel - Manual material clamping Guedeifu Ayopfx Ahzed - Coolant system in the machine base - Operating manual Space requirement L x W x H 1500 x 700 x 1550 mm Weight 590 kg Very good condition

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Guedpfx Ajvzlgaohzsd Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: good (used), Year of construction: 1998, total height: 1,700 mm, total length: 2,100 mm, total width: 2,260 mm, overall weight: 1,300 kg, cutting range round steel at 90°: 260 mm, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Guodpfxjmxliwe Ahzjd

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm Guodpfx Ahjxab Hcszsd capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: good (used), gearing type: mechanical, Do you have gearbox damage on your Behringer or Kasto saw .....? We can repair or refurbish your gearbox, no problem. Gjdpfxotv Eyvs Ahzjud In some cases we can also supply you with replacement gearboxes from stock

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Godpfx Asxg Rhvjhzoud

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Gjdoxtpq Aopfx Ahzoud

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Gsdpfoxv Au Tjx Ahzjud

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Godpfx Ajwk D Efohzeud Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: good (used), Fully automatic with miter cut, Max. Diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, Automatic feed single 600 mm, Gedpfx Ahotqdvgjzjud max. feed length multiple 1800 mm, Minimum offcut length for single cut 20 mm, minimum offcut length for automatic operation 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, coolant system, the saw is still under power, Functional video available, Operating instructions with circuit diagrams and spare parts lists.

Condition: excellent (used), functionality: fully functional, 2. Technical Data KASTOfunctional U Cutting Capacities: Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 300 x 260 mm Cutting range 90° square: 260 x 260 mm Cutting range +45° round: 200 mm Cutting range +45° flat (W x H): 200 x 240 mm Gujdpfxeyhzi Ss Ahzsd Cutting range +45° square: 200 x 200 mm Cutting range +60° round: 165 mm Cutting range +60° flat (W x H): 160 x 120 mm Cutting range +60° square: 150 x 150 mm Cutting range -45° round: 200 mm Cutting range -45° flat (W x H): 200 x 240 mm Cutting range -45° square: 200 x 200 mm Dimensions and Weights: Length: 1,014 mm Width: 1,826 mm Height, upper part lowered: 1,462 mm Height, upper part in highest position: 1,899 mm Material support height: 950 mm Total weight: 510 kg Performance Specifications: Year of manufacture: 2000 Total connected load: 2 kW Saw drive motor: 1.5 kW Cutting speed: 30-75 m/min, infinitely variable Saw blade dimensions: 2910 x 27 x 0.9 mm Saw blade guides: Carbide, replaceable Material clamping: Mechanical Feed: Hydraulic Saw blade tensioning: Mechanical Coolant system: Coolant supplied via 1 coolant nozzle and 1 coolant hose Coolant tank capacity approx. 45 liters Pump flow rate: 16 l/min 3. Machine Description Semi-automatic bandsaw machine with a very robust design for efficient handling of all cut-off and mitre cutting tasks (-45°/+60°) in tubes, profiles and solid materials in workshop applications. The steplessly adjustable feed ensures sensitive and tool-friendly sawing. Universal bandsaw for workshop use in a very robust design for cutting profiles, pipes and solid materials. Machine Base Heavy-duty, torsion-resistant welded construction. Saw Blade Guide The side guide for the saw blade is via mechanically preloaded blade brushes. The blade back is guided by idler rollers. Saw Blade Tensioning Continuously adjustable by ratchet. Mechanically limited tension force. Main Saw Blade Drive Drive power: 1.5 kW, cutting speed 30-75 m/min Material Clamping – Machine Vise Secure material clamping using manually operated horizontal vise. Mitre angle continuously adjustable from 0° – 45° and 0° to +60° using a scale. Indexing bolts at positions -45°, 0°, 45°, and 60° for additional mitre locking. Feed Control Saw feed is steplessly controlled via fine throttle, suitable for universal use on solid and profile materials. Accessories: Coolant system

Condition: used, Year of construction: 1987, Hydr. hacksaw, metal saw, lifting saw KASTO Unfortunately there is no type plate available, the data is from a comparable saw Type PSB WBS 210 / 230 Year of manufacture in the 80s Sawing area - round Ø 250 mm Sawing area - square 225 x 225 mm Sawing area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - only for 90° cuts, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt speeds - Hydraulic saw arm feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering saw bow - manually height-adjustable material support table with mm scale via handwheel Guedpfxjq R Riio Ahzed - Manual material clamping - Coolant device in the machine base Space requirement L x W x H 1500 x 700 x 1550 mm Weight approx. 590 kg

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, The fully hydraulic production hacksaw has a universal hydraulic system for cutting thin and thick-walled profiles as well as solid material exclusively or alternately without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, equipped as standard with infinitely variable mitre device as standard. Lifting of the saw bow in rapid motion. Pendulum vice for perfect saw blade utilisation. Longitudinal guide with ground and hardened guide rails for transferring the cutting pressure forces to the saw bow. Automatic limit stop. Push button operation for functions on, off and upward movement of the saw bow. Manufacturer KASTO Gusdpfxjh Ug Egs Ahzsd Metal hacksaw Machine type EBS 360 U Drive power: 4,4 KW Stroke rates: 37/51/74/102 min Cutting speed: 14/20/28/39 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 660 mm Cutting range flat: 360x200 mm Mitre 0-45 ° Material support height: 500 mm Weight: 820 kg. Length/width: 1915x750 mm Height: 1090 mm Saw blade dimension: 550x45x2 mm Accessories. Coolant system The function of the machines has been checked and repaired. If you have any questions, please do not hesitate to contact us. If you need a different cutting range, please let us know, as we still have other machines in stock. We reserve the right of ownership until all our claims have been paid in full. With kind regards Michael Maurath

Condition: refurbished (used), Used metal sawing machines Circular saws, hacksaws, band saws and accessories Michael Maurath Metallsägen has been in the business of buying and selling used sawing machines for more than 25 years. We enable companies and enterprises from the manufacturing and processing industry to purchase used metal - sawing machines, which are needed for daily work processes, at a reasonable price. Whether band saws, circular saws, hacksaws, roller conveyors, measuring systems or accessories. -- Used sawing machines: checked and fully functional -- We sell high quality sawing machines and offer competent management to our customers. Performance and quality are the main criteria that determine my philosophy and therefore our assortment. Thus, used sawing machines are extensively overhauled and tested for full functionality before the machines go into resale. If you purchase band sawing machines from Michael Maurath Metallsägen, you can also rely on a competent contact person beyond the purchase. With kind regards Michael Maurath Guodpeh A Rv Isfx Ahzod Maurath sawing machines

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Gsdpfx Aoxdwbkshzsud Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: ready for operation (used), Fully hydraulic automatic circular saw for workshop and production. The material is clamped by a hydraulic vices. The control offers simple machine operation. The length can be adjusted via a vernier with 0.1 mm resolution. The piece count adjustment The piece count is set by a piece count counter which switches off the machine when the piece count is reached. The material feed is carried out via a hydraulic cylinder and ensures the highest cutting accuracy. If you have any questions or need a different cutting range, just give us a call. Guedpfx Aoiuz Smjhzod We would be pleased to show and demonstrate the machines to you. Technical data: Bandsaws KASTO Machine type GKS AU Technical data: Drive power Drive power saw gear. 1,6/2,5 KW Cutting speed 14/28 m/min Cutting range round: 140 mm Cutting range flat: 160x90 mm Saw feed hydraulics Hydraulic Saw blade dimension 425 mm Hydraulic material feed 600 mm Material support. 1050 mm Machine dimensions Length/width 2575x2700 mm Height 1900 mm Weight of the machine 1350 kg Year of manufacture 1987

Condition: excellent (used), The fully hydraulic production rapid bow saw is equipped with a universal hydraulic system allowing for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, utilizing a uniform tooth pitch of 3 or 4 teeth per inch. Features include preloaded bow guide, enclosed oil hydraulics, triple pivot bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lift motion and accelerated return stroke, and is factory-equipped with an infinitely variable miter facility. The saw bow can be lifted in rapid traverse mode. The pendulum vise ensures optimum saw blade utilization. The longitudinal guide features ground and hardened guide rails for transmitting cutting forces to the saw bow. Automatic end-of-cut shut-off. Push-button controls for ON, OFF, and rapid traverse of the saw bow. Manufacturer: KASTO Machine type: Metal bow saw Model: PSB 253 U Drive power: 1.6 kW Stroke rates: 50 / 100 / 164 per min Cutting speed: 11 / 22 / 36 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 255 mm Flat cutting capacity: 255 x 160 mm Miter range: 0-45° Workpiece support height: 500 mm Weight: 490 kg Length/width: 1200 x 750 mm Height: 850 mm Saw blade dimensions: 400 x 36 x 2.0 mm Godpjxiv Sfsfx Ahzsud Year of manufacture: 1990 Accessories: Coolant device