Used Kent Surface Grinding Machine for sale (9)

Year of construction: 2008, condition: ready for operation (used), General Data Predpoxx D Adofx Agqod Measurements width 2700mm Measurements depth 6200mm Measurements height 2470mm Machine weight 8500 kg This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 1,000 mm, grinding width: 500 mm, total height: 2,400 mm, total length: 4,445 mm, total width: 2,100 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 550 mm, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 5,800 kg, grinding spindle speed: 1,450 rpm, Table clamping surface: 1000 x 500 mm Table load max. 1000 kg (incl. magnetic clamping plate) Distance table to spindle center 550 mm Sanding spindle motor 5.5 kW Sanding spindle speed 1450 rpm Guide system Flat guides Machine weight approx. 5800 kg Operation/control: Servo-controlled vertical infeed in the sanding cycle Electrical cross travel with memorizable reversal points via control panel Electronic handwheel Movable control panel with 7" color screen and touch function Programmable sanding cycles in 4 variants for vertical axis Workpiece memory, 10 sanding cycles for quick recall Including the following standard accessories: Full enclosure open at the top Separate hydraulic system Infinitely variable longitudinal table movement with automatic table reversal Quick vertical adjustment for the sanding head 300 mm/min (rapid traverse) Automatic stepless vertical infeed from 0.001 - 0.025 mm via servo motor Adjustable magnet incl. clamping force monitoring Automatic central lubrication with visual inspection 1 balancing device for grinding wheels, incl. balancing mandrel 1 grinding wheel flange for grinding wheel bore 127 mm 1 grinding wheel 355 x 38.1 x 127 mm 1 Table dresser 1 Rear splash guard Podpocm Axuefx Agqsrd 1 Set of leveling screws for alignment and machine feet 1 Operating instructions incl. wiring diagram 1 acceptance report for machine geometry and grinding spindle according to DIN 8632 Optional: Fine-pole electromagnetic clamping plate 1000 x 500 mm Coolant tank (max. 135 L) with magnetic separator and paper belt filter Manual dresser with hand lever

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 157310, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, grinding wheel diameter: 300 mm, overall weight: 5,000 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 700 mm, KENT KGS-510 WMA 2 surface grinding machine - Magnet dimensions: 1000 x 510 mm Note: The item must be collected between 19 and 23 January 2026 on a binding, mutually agreed date. Prsdpfxsxw Tb He Agqod FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), Year of construction: 2006, grinding length: 500 mm, grinding width: 250 mm, capacity 500×250 mm Pedpfx Agoww Eywjqord magnetic 500×250 mm 3 automatic functions

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW Pjdpfx Agjvwdhhjqord

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Prodpfxjh Ha Ipe Agqsd Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Pedpfoqwyzfox Agqsrd Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Year of construction: 2017, condition: as good as new (ex-display), Flowmeter for water Make ABB Kent Messtechnik type 656 WP 4800 Pn 16 bar Qn 25 m3/h Ap 0,3 bar Pedpsd Tg Szjfx Agqjrd 30 degrees 30 degrees

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, table width: 460 mm, table length: 760 mm, overall weight: 3,900 kg, spindle speed (max.): 10,000 rpm, Kent KVR-2418 CNC Vertical Machining Center Roller linear guideways Year: 2012 Control: Fanuc 0i‑MD Podpfx Aow Rylajgqsrd X‑Axis Travel: 24″ (610 mm) Y‑Axis Travel (Saddle): 18.1″ (460 mm) Z‑Axis Travel (Column): 18.9″ (480 mm) Table Size: 30″ × 18″ (760 × 460 mm) Table Load Capacity: 660 lb (300 kg) Spindle Speed: 10,000 RPM Spindle Motor: 15 HP (11.2 kW) high‑torque servo Spindle Taper: CAT‑40 (BT‑40 optional) Rapid Traverse: 1,417 IPM (~36 m/min) Cutting Feed Rate: 590 IPM (~15 m/min) Tool Changer: 16 tools station Auto-lubrication system Machine Weight: ~7,550 lb (3,430 kg) Physical Dimensions (W × D × H): approx. 95.3″ × 89″ × 94.5″ (2,240 × 2,350 × 2,500 mm)